Resistor Networks. 898-3-xxxx Datasheet

898-3-xxxx Networks. Datasheet pdf. Equivalent


BI Technologies 898-3-xxxx
MODELS 898, 8.9co9mDual-In-Line
UThick Film
et4Resistor Networks
.DataShe mELECTRICAL
w oStandard Resistance Range, Ohms *
ww .cStandard Resistance Tolerance, at 25°C
Operating Temperature Range
UTemperature Coefficient of Resistance
t4Temperature Coefficient of Resistance Tracking
Maximum Operating Voltage
eInsulation Resistance
eENVIRONMENTAL (PER MIL-R-83401)
hThermal Shock plus Power Conditioning
Short Time Overload
STerminal Strength
taMoisture Resistance
Mechanical Shock
Vibration
aLow Temperature Storage
High Temperature Exposure
.D mLoad Life, 1,000 Hours
oResistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B)
w .cDielectric Withstanding Voltage
UTemperature Exposure, Maximum
w t4Marking Permanency
eLead Solderability
w heFlammability
SStorage Temperature Range
ta* Plus “0 Ohm” jumper
www.DaSpecifications subject to change without notice.
10 to 10Meg
±2% (<33 Ohms = ±2 Ohms)
Optional: ±1% (F Tol.)
-55°C to +125°C
±100ppm/°C (<100 Ohms = ±250ppm/°C)
±50ppm/°C
100Vdc or PR
10,000 Megohms
R 0.70%
R 0.50%
R 0.25%
R 0.50%
R 0.25%
R 0.25%
R 0.25%
R 0.50%
R 1.00%
R 0.25%
200V rms for 1 minute
215°C for 3 minutes
MIL-STD-202, Method 215
MIL-STD-202, Method 208
UL-94V-O Rated
-55°C to +125°C
4-161
Models 898, 899
4


898-3-xxxx Datasheet
Recommendation 898-3-xxxx Datasheet
Part 898-3-xxxx
Description (898-Series) Dual-In-Line Thick Film Resistor Networks
Feature 898-3-xxxx; MODELS 898, 899 m Dual-In-Line Thick Film Resistor Networks ELECTRICAL w Standard Resistance Ran.
Manufacture BI Technologies
Datasheet
Download 898-3-xxxx Datasheet




BI Technologies 898-3-xxxx
MECHANICAL
Lead Material
Substrate Material
Resistor Material
Copper Alloy, 60/40 Tin-Lead (Plating)
Alumina
Cermet
APPLICABLE DOCUMENTS
MIL-R-83401 — Resistor Networks, Fixed, Film, General Specifications
MIL-STD-105 — Sampling Procedures and Tables for Inspection by Attributes
MIL-STD-202 — Test Methods for Electronic and Electrical Component Parts
STANDARD RESISTANCE VALUES, OHMS
POWER DISSIPATION, WATTS AT 70°C
-3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors)
22 390 5.6K 100K
27 470 6.8K 120K
33 510 8.2K 150K
39 560 10K 180K
47 680 12K 200K
51 820 15K 220K
56 1K 18K 270K
68
1.2K 20K
330K
82
1.5K 22K
390K
100 1.8K 27K 470K
120 2K
33K 510K
150 2.2K 39K 560K
180 2.7K 47K 680K
200 3.3K 51K 820K
220 3.9K 56K 1Meg
270 4.7K 68K
330 5.1K 82K
-5 Circuit (Dual Terminators)
R1/R2
180/390
220/270
R1/R2
220/330
330/390
R1/R2
330/470
330/680
R1/R2
3K/6.2K
Model
898
899
——Resistor (Per Circuit)——
Package -1
-3 -5
2.0 .125 .250 .125
1.8 .125 .250 .125
4-162
Models 898, 899



BI Technologies 898-3-xxxx
OUTLINE DIMENSIONS (Inch/mm)
Model 898
Model 899
.880 Max.
22.4
.780 Max.
19.8
.250 Ref.
6.35
Notes:
Unless otherwise specified,
tolerances are
±
.005
0.13
.340 ± .020
8.64 ± 0.51
Max.
.125
3.18
Max.
.050
1.27
Ref.
.060 Ref.
1.52
.080 ± .020
2.03 ± 0.51
.100 ± .010*
2.54 ± 0.25
.018 ± .003
0.46 ± 0.08
.600 ± .010
15.2 ± 0.25
.700 ± .010
17.8 ± 0.25
.00.2501Min.
.135 ± .030
3.43 ± 0.76
.185 Max.
4.70
*Typical spacing
non-accumulating
lead thickness: .010 ± .002
0.25 ± 0.05
SCHEMATICS
-3 Circuit - Isolated Resistors
N
1 N/2
-1 Circuit - Bussed Resistors
N
1 N/2
-5 Circuit - Dual Terminator
N
R1
R2
1 N/2
-42 Circuit
VCC VEE
-
5.2V
(VEE)
Pull-Down
16
RR RR R R
cR RR RR R
1
VCC VEE
Custom Model: 898-42-R (R)
R=510
Note: Model 899: N = 114 Leads, Model 898: N = 16 Leads.
Custom circuits are available. Consult Factory.
-45 Circuit - TTL to ECL Translator
VCC TTL Inputs
16
R1 180
R2 270
R3 820
1
VCC Outputs To ECL
VEE
Custom Model: 898-45
R1=180R2=270R3=820
4
4-163
Models 898, 899







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)