LCD_Module. T-51512D121J-FW_A_AB Datasheet
.comLCD Module Technical Specification
heet4UType No. T-51512D121J-FW-A-AB
Jun 18, 2003
www.DataS Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
.comPrepared by (Module Administration Group)
e2 ABSOLUTE MAXIMUM RATINGS
h3 ELECTRICAL CHARACTERISTICS
S4 INTERFACE PIN CONNECTION
ta5 INTERFACE TIMING
a6 BLOCK DIAGRAM
7 MECHANICAL SPECIFICATION
.D8 OPTICAL CHARACTERISTICS
w9 RELIABILITY TEST CONDITION
w10 INSPECTION STANDARDS
w11 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
-- PACKAGING SPECIFICATION
.com-- PRODUCT NUMBER LABELING FORMS
U-- LAMP UNIT FOR 12.1” SVGA
www.DataSheet4T-51512D121J-FW-A-AB (AB) No. 2003-0101
T-51512D121J-FW-A-AB is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data, 800 × 600, 260 K-color images are displayed on the 12.1” diagonal
screen. Input power voltage is single 3.3V or 5.0V for LCD driving. Both 3.3 V-CMOS and 5.0 V-
CMOS level voltage are acceptable for logic input voltage.
Inverter for backlight is not included in this module. General specifications are summarized in the
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Number of Color
Optimum Viewing Angle(Contrast ratio)
Module Size (mm)
Module Mass (g)
246.0 × 184.5
800 × 3 (H) × 600 (V)
0.3075 (H) × 0.3075 (V)
RGB vertical stripe
280.0 (W) × 210.0 (H) × 12.0 (D)
CCFL, 2-tubes, edge-light, replaceable
Antiglare and hard-coating 3H
Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard use in
OA equipment and consumer products, such as computers, communication equipment, industrial
robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability, such
as aerospace applications, submarine cables, nuclear power control systems and medical or other
equipment for life support.
OPTREX assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.
T-51512D121J-FW-A-AB (AB) No. 2003-0101
|Features||Datasheet pdf m o .c Technical Specification LCD Modul e U 4 t e e h T-51512D121J-FW-A-AB S a at .D w w w Type No. First Edition Ju n 18, 2003 Final Revision ****** Appr oved by (Quality Assurance Division) N o. -1 2 3 4 5 6 7 8 9 10 11 ---- m o . c U 4 t e e h S a t a .D w w w Item Pag e 1 2 3 3 6 8 CONTENTS OVERVIEW ABSOLUT E MAXIMUM RATINGS ELECTRICAL CHARACTERI STICS INTERFACE PIN CONNECTION INTERFAC E TIMING BLOCK DIAGRAM 11 12 14 16 17 1 8 21 MECHANICAL SPECIFICATION OPTICAL C HARACTERISTICS RELIABILITY TEST CONDITI ON INSPECTION STANDARDS HANDLING PRECAU TIONS FOR TFT-LCD MODULE PACKAGING SPEC IFICATION PRODUCT NUMBER LABELING FORMS LAMP UNIT FOR 12.1” SVGA Checked by (ACI Engineering Division) Prepared b y (Module Administration Group) T-5151 2D121J-FW-A-AB (AB) No. 2003-0101 OPTR EX CORPORATION m o 25 .c U 27 4 t e e h S a at .D w w w Page 1/32 1. OVERVIE W T-51512D121J-FW-A-AB is 12.1” color TFT-LCD (Thin Film Transistor Liquid C rystal Display) module composed of LCD panel, driver ICs, control c.|
|Keywords||T-51512D121J-FW_A_AB, datasheet, pdf, OPTREX, LCD_Module, -51512D121J-FW_A_AB, 51512D121J-FW_A_AB, 1512D121J-FW_A_AB, T-51512D121J-FW_A_A, T-51512D121J-FW_A_, T-51512D121J-FW_A, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|