FBR211SED012. 211SED012 Datasheet

211SED012 FBR211SED012. Datasheet pdf. Equivalent

Part 211SED012
Description FBR211SED012
Feature www.DataSheet4U.com MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES s FEATURE.
Manufacture Fujitsu Media Devices Limited
Datasheet
Download 211SED012 Datasheet




211SED012
www.DataSheet4U.com
MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
FBR211 SERIES
s FEATURES
q 2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
q Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
q International terminal pitch of one inch grid terminal layout
q High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
q Conforms to FCC 68.302 (high dielectric strength type)
q UL recognized (File number E63615)
q CSA recognized (File number LR64026)
s ORDERING INFORMATION
[Example]
FBR211 S A D012 U – P 2 (–CSA)
(a) (b) (c) (d) (e) (f ) (g) (h)
(a) Series Name
FBR211
(b) Enclosure
S: Flux free type
N: Plastic sealed type
(c) Coil Power and Schematics
}A: Standard A type
B: Standard B type
(nominal power 0.45 W type)
}C: High sensitivity C type
E: High sensitivity E type
(nominal power 0.2 W type)
(d) Nominal Voltage
(Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e) UL Standard
Nil : Standard
U : UL114 recognized
(f ) Contact Material
P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g) Special Type
Nil : Standard
2 : High dielectric strength type
(h) CSA Standard
Nil : Standard
-CSA : UL114 + CSA recognized (e) is U
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
1



211SED012
www.DataSheet4U.com
FBR211 SERIES
s SAFETY STANDARD AND FILE NUMBERS
UL114 (File No. E63615)
C22.2 No. 14 (File No. LR40304 or LR64026)
Nominal voltage
1.5 to 24 VDC
Contact rating
1 A 28 VDC resistive
0.5 A 30 VAC resistive
s SPECIFICATIONS
Item
Standard (A or B type)
High sensitive (C or E type)
Contact
Arrangement
1 form C (SPDT)
Material
Gold-overlay silver-palladium or gold-overlay silver
Resistance (initial)
Maximum 100 m(at 0.1 A 6 VDC)
Rating (resistive)
0.5 A 120 VAC or 1 A 28 VDC
Maximum Carrying Current 2 A
Maximum Switching Power 60 VA or 28 W
Max. Switching Voltage*1
220 VAC or 150 VDC
Maximum Switching Current 1.25 A (AC) or 2 A (DC)
Minimum Switching load*2
(reference)
Plastic sealed 1 mA 1
Flux free 1 mA 5
Coil
Nominal Power (at 20°C)
Approximately 0.45 W
Approximately 0.2 W
Operate Power (at 20°C)
Approximately 0.315 W maximum Approximately 0.14 W maximum
Operating Temperature
–25°C to +55°C (no frost)
–25°C to +75°C (no frost)
Operating Humidity
45 to 85%RH
Time Value Operate (at nominal voltage) Maximum 5 ms
Release (at nominal voltage) Maximum 5 ms
Insulation Resistance (initial)
Minimum 100 M(at 500 VDC)
Dielectric
Strength
between coil and contacts
500 VAC 1 minute (standard)
1,000 VAC 1 minute (high dielectric strength type)
between open contacts 500 VAC 1 minute
Life Mechanical
5 × 106 operations minimum
Electrical
(Refer to the REFERENCE DATA)
3 × 105 operations minimum (at 1 A/ 28 VDC resistive load)
1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)
1 × 105 operations minimum (at 0.5 A/120 VDC resistive load)
Other
Vibration Resistance
10 to 55 Hz (double amplitude of 1.5 mm)
Shock
Misoperation
Resistance Endurance
100 m/s2 (11±1 ms)
1,000 m/s2 (11±1 ms)
60 m/s2 (11±1 ms)
Weight
Approximately 4 g
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The mini-
mum switching load varies with the switching frequency and operation environment.
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)