Video Filter. ADA4412-3 Datasheet

ADA4412-3 Filter. Datasheet pdf. Equivalent


Analog Devices ADA4412-3
www.DataSheet4U.com
Integrated Triple Video Filter with Selectable
Cutoff Frequencies for RGB, HD/SD
ADA4412-3
FEATURES
Sixth-order adjustable video filters
36 MHz, 18 MHz, and 9 MHz
Many video standards supported: RGB, YPbPr, YUV, SD, Y/C
Ideal for 720p and 1080i resolutions
−1 dB bandwidth of 31.5 MHz for HD
Low quiescent power
Only 265 mW for 3 channels on 5 V supply
Disable feature cuts supply current to 10 μA
DC output offset adjust: ±0.5 V, input referred
Fixed throughput gain of ×2
Excellent video specifications
Wide supply range: +4.5 V to ±5 V
Rail-to-rail output
Output can swing 4.5 V p-p on single 5 V supply
Small packaging: 20-lead QSOP
APPLICATIONS
Set-top boxes
DVD players and recorders
Personal video recorders
HDTVs
Projectors
GENERAL DESCRIPTION
The ADA4412-3 is a comprehensive filtering solution designed
to give designers the flexibility to easily filter and drive various
video signals, including high definition video. Cutoff frequen-
cies of the sixth-order video filters range from 9 MHz to
36 MHz and can be selected by two logic pins to obtain four
filter combinations that are tuned for RGB, high definition, and
standard definition video signals. The ADA4412-3 has a rail-to-
rail output that can swing 4.5 V p-p on a single 5 V supply.
The ADA4412-3 includes an output offset voltage adjustment
feature. Output voltage offset is continuously adjustable over an
input-referred range of ±500 mV by applying a differential
voltage to an independent offset control input.
FUNCTIONAL BLOCK DIAGRAM
Y/G IN
×1
36MHz, 18MHz, 9MHz
×2
Y/G OUT
Pb/B IN
×1
36MHz, 18MHz, 9MHz
×2
Pb/B OUT
Pr/R IN
×1
LEVEL1
LEVEL2
2
CUTOFF SELECT
DISABLE
DC
OFFSET
36MHz, 18MHz, 9MHz
×2
ADA4412-3
Figure 1.
Pr/R OUT
The ADA4412-3 can operate on a single +5 V supply as
well as on ±5 V supplies. Single-supply operation is ideal in
applications where power consumption is critical. The disable
feature allows for further power conservation by reducing the
supply current to typically 10 μA when a particular device is not
in use.
Dual-supply operation is best for applications where the
negative-going video signal excursions must swing at or below
ground while maintaining excellent video performance. The
output buffers have the ability to drive two 75 Ω doubly
terminated cables that are either dc-coupled or ac-coupled.
The ADA4412-3 is available in a 20-lead QSOP and is rated for
operation over the extended industrial temperature range of
−40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2005 Analog Devices, Inc. All rights reserved.


ADA4412-3 Datasheet
Recommendation ADA4412-3 Datasheet
Part ADA4412-3
Description Integrated Triple Video Filter
Feature ADA4412-3; www.DataSheet4U.com Integrated Triple Video Filter with Selectable Cutoff Frequencies for RGB, HD/S.
Manufacture Analog Devices
Datasheet
Download ADA4412-3 Datasheet




Analog Devices ADA4412-3
ADA4412-3
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
Thermal Resistance ...................................................................... 5
ESD Caution.................................................................................. 5
Pin Configuration And Function Descriptions............................ 6
Typical Performance Characteristics ............................................. 7
Theory of Operation ........................................................................ 9
REVISION HISTORY
7/05—Revision 0: Initial Version
Applications..................................................................................... 10
Overview ..................................................................................... 10
Disable ......................................................................................... 10
Cutoff Frequency Selection....................................................... 10
Output DC Offset Control ........................................................ 10
Input and Output Coupling ...................................................... 11
Printed Circuit Board Layout ................................................... 11
Video Encoder Reconstruction Filter...................................... 11
Outline Dimensions ....................................................................... 13
Ordering Guide .......................................................................... 13
Rev. 0 | Page 2 of 16



Analog Devices ADA4412-3
ADA4412-3
SPECIFICATIONS
VS = 5 V, @ TA = 25°C, VO = 1.4 V p-p, RL = 150 Ω, unless otherwise noted.
Table 1.
Parameter
OVERALL PERFORMANCE
Offset Error
Offset Adjust Range
Input Voltage Range, All Inputs
Output Voltage Swing, All Outputs
Linear Output Current per Channel
Integrated Voltage Noise, Referred to Input
Filter Input Bias Current
Total Harmonic Distortion at 1 MHz
Gain Error Magnitude
FILTER DYNAMIC PERFORMANCE
−1 dB Bandwidth
−3 dB Bandwidth
Out-of-Band Rejection
Crosstalk
Propagation Delay
Group Delay Variation
Differential Gain
Differential Phase
CUTOFF CONTROL INPUT PERFORMANCE
Input Logic 0 Voltage
Input Logic 1 Voltage
Input Bias Current
DISABLE PERFORMANCE
DISABLE Assert Voltage
DISABLE Assert Time
DISABLE Deassert Time
DISABLE Input Bias Current
Input-to-Output Isolation—Disabled
POWER SUPPLY
Operating Range
Quiescent Current
Quiescent Current—Disabled
PSRR, Positive Supply
PSRR, Negative Supply
Test Conditions/Comments
Input referred, all channels
Input referred
Positive swing
Negative swing
All channels
All channels
FC = 36 MHz, FC = 18 MHz/FC = 9 MHz
Cutoff frequency select = 36 MHz
Cutoff frequency select = 18 MHz
Cutoff frequency select = 9 MHz
Cutoff frequency select = 36 MHz
Cutoff frequency select = 18 MHz
Cutoff frequency select = 9 MHz
f = 75 MHz
f = 5 MHz, FC = 36 MHz
f = 5 MHz, FC = 36 MHz
Cutoff frequency select = 36 MHz
Cutoff frequency select = 18 MHz
Cutoff frequency select = 9 MHz
NTSC, FC = 9 MHz
NTSC, FC = 9 MHz
f = 10 MHz
All channels
All channels
Min Typ Max Unit
VS− − 0.1
VS+ − 0.30
9
±500
VS+ − 0.20
VS− + 0.10
30
0.50
6.6
0.01/0.04
0.09
23
VS+ − 2.0
VS− + 0.15
0.49
mV
mV
V
V
V
mA
mV rms
μA
%
dB
26.5 31.5
13.5 15.5
6.5 8.0
34 37
16 19
89
−31 −43
−62
19
7
14
27
0.16
0.05
MHz
MHz
MHz
MHz
MHz
MHz
dB
dB
ns
ns
ns
ns
%
Degrees
2.0
10
0.8 V
V
15 μA
VS+ − 0.5
100
130
12
90
V
ns
ns
μA
dB
4.5
53
10
64 70
58 60
12 V
56 mA
150 μA
dB
dB
Rev. 0 | Page 3 of 16







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)