DatasheetsPDF.com

QUAD TRUNK. AG2410 Datasheet

DatasheetsPDF.com

QUAD TRUNK. AG2410 Datasheet






AG2410 TRUNK. Datasheet pdf. Equivalent




AG2410 TRUNK. Datasheet pdf. Equivalent





Part

AG2410

Description

HIGH PERFORMANCE QUAD TRUNK



Feature


www.DataSheet4U.com Silver TELECOM TIP1 RING1 Ag2410 FEATURES V1-4 February 2005 Data Sheet HIGH PERFORMANCE QUAD TRUNK • 4 highly featured Trunks (COI C, FXO) in a single Module. • Magneti c isolation providing high common mode rejection (CMRR) for use in un-grounded systems. • Highly integrated with on board loop switch and integral diode b ridge. • Loop Start oper.
Manufacture

Silver

Datasheet
Download AG2410 Datasheet


Silver AG2410

AG2410; ation with On-Hook reception and reversa l detect (for Caller Line ID and remote metering). • Ringing detection detec tion. and Loop Current TRUNK 1 VIN1 V OUT 1 TIP2 RING2 TRUNK 2 VIN2 VOUT 2 TIP3 RING3 TRUNK 3 VIN3 VOUT 3 TIP 4 RING4 TRUNK 4 VIN4 VOUT 4 • Meet s requirements of EN60950/UL1950, and F CC Pt68. • Minimum number of external components, single +5V .


Silver AG2410

system side power supply. • Programmab le d.c. mask. • Silver Telecom “des ign-in” assistance. Control and Supe rvision DESCRIPTION The Silver Telecom Ag2410 comprises four individual Trunk Circuits in a single Module. The combi nation of features and packaging offers extremely efficient use of board area, saving significantly on system size an d cost. The Ag2410 has bee.


Silver AG2410

n designed to work with 600R line impeda nce and meets international safety and regulatory requirements. In addition to the features shown above the Ag2410 al lows flexible programming of many funct ions, including the dc voltage mask. Ea ch circuit requires a minimum of extern al components and has been specified fo r ease of use, to reduce time to market . The system inter.

Part

AG2410

Description

HIGH PERFORMANCE QUAD TRUNK



Feature


www.DataSheet4U.com Silver TELECOM TIP1 RING1 Ag2410 FEATURES V1-4 February 2005 Data Sheet HIGH PERFORMANCE QUAD TRUNK • 4 highly featured Trunks (COI C, FXO) in a single Module. • Magneti c isolation providing high common mode rejection (CMRR) for use in un-grounded systems. • Highly integrated with on board loop switch and integral diode b ridge. • Loop Start oper.
Manufacture

Silver

Datasheet
Download AG2410 Datasheet




 AG2410
www.DataSheet4U.com
Silver
TELECOM
V1-4 February 2005
Ag2410Data Sheet
HIGH PERFORMANCE
QUAD TRUNK
FEATURES
TIP1
RING1
TIP2
RING2
TRUNK
1
TRUNK
2
VIN1
VOUT1
VIN2
VOUT2
• 4 highly featured Trunks (COIC, FXO) in a
single Module.
• Magnetic isolation providing high common
mode rejection (CMRR) for use in
un-grounded systems.
• Highly integrated with on board loop switch
and integral diode bridge.
TIP3
RING3
TIP4
RING4
TRUNK
3
TRUNK
4
VIN3
VOUT3
VIN4
VOUT4
• Loop Start operation with On-Hook
reception and reversal detect (for Caller
Line ID and remote metering).
• Ringing detection and Loop Current
detection.
• Meets requirements of EN60950/UL1950,
and FCC Pt68.
Control and
Supervision
• Minimum number of external components,
single +5V system side power supply.
• Programmable d.c. mask.
DESCRIPTION
The Silver Telecom Ag2410 comprises four
individual Trunk Circuits in a single Module.
The combination of features and packaging
offers extremely efficient use of board area,
saving significantly on system size and cost.
The Ag2410 has been designed to work with
600R line impedance and meets international
safety and regulatory requirements.
In addition to the features shown above the
Ag2410 allows flexible programming of many
functions, including the dc voltage mask.
• Silver Telecom “design-in” assistance.
Each circuit requires a minimum of external
components and has been specified for ease
of use, to reduce time to market.
The system interface has been designed for
direct connection to popular Codecs of both
the audio and signalling connections.
The Ag2410 is designed for applications
where there is a high level of common mode
interference, such as PABX, long loop
applications and systems without a ground.
© Silver Telecom 2005




 AG2410
V1.4 February 2005
Data Sheet
Ag2410
QUAD TRUNK
Ag2410
HIGH PERFORMANCE QUAD TRUNK
Silver
TELECOM
Figure 1: Packaging Format
Ordering Information
Ag2410
High Performance Quad Trunk
DMa1
DMb1
Tip1
R in g1
TRUNK 1
Power
Management
Line
Termination
&
Loo p
Switch
Supervision
VCC GND
2-4 Wire
Converter
DMa2
DMb2
Tip2
R in g2
DMa3
DMb3
Tip3
R in g3
DMa4
DMb4
Tip4
R in g4
TRUNK 2
TRUNK 3
TRUNK 4
© Silver Telecom 2005
Figure 2: Block Diagram
Page 2
Zb1
Vref1
Vout1
Vin1
RS1
LC1
LSC1
Zb2
Vref2
Vout2
Vin2
RS2
LC2
LSC2
Zb3
Vref3
Vout3
Vin3
RS3
LC3
LSC3
Zb4
Vref4
Vout4
Vin4
RS4
LC4
LSC4




 AG2410
V1.4 February 2005
Data Sheet
Ag2410
HIGH PERFORMANCE QUAD TRUNK
1.0 Pin Description
Pin #
ABCD
Name
Description
1 8 15 22 TIP (A) Tip. Connects to the subscriber line Tip.
2 9 16 23 RING (B) Ring. Connects to the subscriber line Ring.
3 10 17 24 nc No connect. This pin can be left open circuit.
4 11 18 25
5 12 19 26
6 13 20 27
7 14 21 28
71 57 43 29
72 58 44 30
73 59 45 31
nc
DMa
DMb
nc
GND
VCC
nc
No connect. This pin can be left open circuit.
DC Mask a. A resistor is connected between this pin and
DMb to adjust the d.c. characteristics of the termination.
DC Mask b. A resistor is connected between this pin and
DMa to adjust the d.c. characteristics of the termination.
No connect. This pin can be left open circuit.
Analog ground. Normally connected to system ground. All
four pins must be connected to Analog Ground.
+5V supply. All four pins must be connected to +5V.
No connect. This pin can be left open circuit.
74 60 46 32
75 61 47 33
76 62 48 34
77 63 49 35
78 64 50 36
79 65 51 37
nc
Zb
VIN
nc
VOUT
nc
No connect. This pin can be left open circuit.
Balance network. The network balance matching
components are connected between this pin, VIN and GND.
Audio In. This is the analog input signal from the Codec
(which is output on Tip and Ring). Connected via a 100nF
capacitor.
No connect. This pin can be left open circuit.
Audio Out. This is the analog output signal (from Tip and
Ring) to the Codec. Connected via a 100nF capacitor.
No connect. This pin can be left open circuit.
80 66 52 38
81 67 53 39
82 68 54 40
LC
LSC
RS
Loop current. A logic 1 Indicates that loop current is flowing.
Loop switch control. Applying a logic 1 closes the integral
loop switch.
Ringing signal. A logic 0 indicates the presence of ringing
voltage on the telephone line. Toggles at twice the ringing
frequency. Also RS indicates whether the line polarity has
reversed with a pulse.
83 69 55 41 nc No connect. This pin can be left open circuit.
84 70 56 42
VREF
Analog reference. Bias voltage for analog circuitry. Must
be de-coupled with 100uF.
© Silver Telecom 2005
Page 3






Recommended third-party AG2410 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)