MMIC Transmitter. XU1003 Datasheet

XU1003 Transmitter. Datasheet pdf. Equivalent


Mimix Broadband XU1003
19.0-26.0 GHz GaAs MMIC
Transmitter
June 2005 - Rev 21-Jun-05
Features
Sub-harmonic Transmitter
Integrated IR Mixer, LO Buffer & Output Amplifier
2.0 dBm LO Drive Level
15.0 dB Image Rejection, 10.0 dB Conversion Gain
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883 Method 2010
Chip Device Layout
U1003
General Description
Mimix Broadbands 19.0-26.0 GHz GaAs MMIC transmitter has a
+20.0 dBm output third order intercept and 15.0 dB image
rejection across the band.This device is an image reject sub-
harmonic anti-parallel diode mixer followed by a balanced two
stage output amplifier and includes an integrated LO buffer
amplifier.The image reject mixer reduces the need for
unwanted sideband filtering before the power amplifier.The
use of a sub-harmonic mixer makes the provision of the LO
easier than for fundamental mixers at these frequencies. I and Q
mixer inputs are provided and an external 90 degree hybrid is
required to select the desired sideband.This MMIC uses Mimix
Broadbands 0.15 µm GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure high
repeatability and uniformity.The chip has surface passivation to
protect and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy or
eutectic solder die attach process.This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+5.0 VDC
320, 165 mA
+0.5 VDC
0.0 dBm
-65 to +165 OC
-55 to MTTF Table1
MTTF Table1
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 19.0 - 26.0
Frequency Range (RF) Lower Side Band
GHz 19.0 - 26.0
Frequency Range (LO)
GHz 8.0
- 14.5
Frequency Range (IF)
GHz DC - 3.0
Output Return Loss RF (S22)
dB - 14.0 -
Small Signal Conversion Gain IF/RF (S21)
dB - 10.0 -
LO Input Drive (PLO)
dBm - +2.0 -
Image Rejection
dBc - 15.0 -
Isolation 2xLO to RF
dB - -12.0 -
Output Third Order Intercept (OIP3)
dBm - TBD -
Drain Bias Voltage (Vd1)
VDC - +4.0 +4.5
Drain Bias Voltage (Vd2)
VDC - +4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC -1.2 -0.1 +0.3
Supply Current (Id1) (Vd1=4.0V, Vg=-0.1V Typical)
mA - 230 280
Supply Current (Id2) (Vd2=4.0V, Vg=-0.1V Typical)
mA - 116 140
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


XU1003 Datasheet
Recommendation XU1003 Datasheet
Part XU1003
Description GaAs MMIC Transmitter
Feature XU1003; 19.0-26.0 GHz GaAs MMIC Transmitter June 2005 - Rev 21-Jun-05 Features Sub-harmonic Transmitter Int.
Manufacture Mimix Broadband
Datasheet
Download XU1003 Datasheet




Mimix Broadband XU1003
19.0-26.0 GHz GaAs MMIC
Transmitter
June 2005 - Rev 21-Jun-05
U1003
Transmitter Measurements
20
18
16
14
12
10
8
6
4
2
0
19
20
18
16
14
12
10
8
6
4
2
0
19
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA, USB
LO = + 2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
20 21 22 23 24 25
RF Frequency (GHz)
Max Median Mean -3sigma
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA, LSB
LO = +2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
20 21 22 23 24 25
RF Frequency (GHz)
Max Median Mean -3sigma
26
26
0
-5
-10
-15
-20
-25
-30
-35
-40
19
0
-5
-10
-15
-20
-25
-30
-35
-40
19
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA, USB
LO = +2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
20 21 22 23 24 25
RF Frequency (GHz)
Max Median Mean -3sigma
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA, LSB
LO = +2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
20 21 22 23 24 25
RF Frequency (GHz)
Max Median Mean -3sigma
26
26
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA,
LO = +2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
0
XU1003: Vd1 = 4 V, Vd2 = 4 V, Id1 = 230 mA, Id2 = 216 mA,
LO = +2 dBm, IF = 2 GHz, IF = -15 dBm, ~125 devices
0
-2
-5
-4
-10
-6
-15
-8
-10 -20
-12
-25
-14
-30
-16
-35
-18
-20
19 20 21 22 23 24 25 26
RF Frequency (GHz)
Max Median Mean -3sigma
-40
17 18 19 20 21 22 23 24 25 26 27 28
2xLO Frequency (GHz)
Max Median Mean -3sigma
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Mimix Broadband XU1003
19.0-26.0 GHz GaAs MMIC
Transmitter
June 2005 - Rev 21-Jun-05
Mechanical Drawing
1.945
(0.077)
1.608
(0.063)
1
1.678
(0.066)
2
2.478
(0.098)
3
3.278
(0.129)
4
U1003
5
1.487
(0.059)
10
9
87
6
0.0
0.0
1.678
(0.066)
2.478
(0.098)
3.077 3.278 3.677 3.970
(0.121) (0.129) (0.145) (0.156)
(Note: Engineering designator is 22TX0523)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All DC/IF Bond Pads are 0.100 x 0.100 (0.004 x 0.004). All RF Bond Pads are 0.100 x 0.200 (0.004 x 0.008).
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 4.787 mg.
Bond Pad #1 (RF Out) Bond Pad #3 (IF1)
Bond Pad #2 (Vd1) Bond Pad #4 (Vd2)
Bias Arrangement
Vd1
IF1
23
Bond Pad #5 (LO)
Bond Pad #7 (Vg2) Bond Pad #9 (IF2)
Bond Pad #6 (Vg2b) Bond Pad #8 (Vg2a) Bond Pad #10 (Vg1)
Bypass Capacitors - See App Note [2]
Vd2
Vd2
Vd1 IF1
4
RF 1
5 LO
RF
XU1003
LO
Vg1
10
9
87
6
IF2
Vg2
Vg1 Vg2
IF2
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)