DFB-LD MODULE. FU-650SDF-FW49Mxx Datasheet

FU-650SDF-FW49Mxx Datasheet PDF, Equivalent


Part Number

FU-650SDF-FW49Mxx

Description

DFB-LD MODULE

Manufacture

Mitsubishi Electric

Total Page 5 Pages
PDF Download
Download FU-650SDF-FW49Mxx Datasheet PDF


FU-650SDF-FW49Mxx Datasheet
MAY06 (1/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-Fx49Mxx
1.55 μm DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DESCRIPTION
Module type FU-650SDF-Fx49Mxx is a 1.5μm coaxial
Uncooled DFB-LD module with single-mode optical fiber.
This module is suitable for a light source of analog
applications such CATV return path.
FEATURES
l High liniality multi quantum wells (MQW) DFB-LD
l Emission wavelength is in 1.55μm band
l CWDM 8ch selectable
l Built-in optical isolator
l Coaxial package
l With photodiode for optical output monitor
APPLICATION
CATV return path
Analog transmission systems
www.DataSheet4U.com
ABSOLUTE MAXIMUM RATINGS (Tc=25°C)
Parameter
Symbol
Laser diode Optical output power Pf
Forward current
If
Reverse voltage
Vrl
Photodiode Reverse voltage
Vrd
Forward current
Ifd
Operating case temperature
Tc
Storage temperature
Tstg
Conditions
CW
CW
-
-
-
-
-
Rating
10
150
2
20
2
-5 ~ +75
-40 ~ +85
Unit
mW
mA
V
V
mA
°C
°C
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL

FU-650SDF-FW49Mxx Datasheet
MAY06 (2/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-Fx49Mxx
1.55 μm DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
ELECTRICAL/OPTICAL CHARACTERISTICS (Tc=25°C, unless otherwise noted)
Parameter
Symbol
Test Conditions
Limits
Unit
Min. Typ. Max.
Threshold current
Ith CW
- 10 20 mA
Optical output power
at threshold current
Pth CW, Ibias=Ith
- - 100 μW
Operating current
Iop CW, Pf=4mW
- 40 65 mA
Operating voltage
Vop CW, Pf=4mW
-
1.2 1.5
V
Modulation Current (Iop-Ith)
Imod CW, Pf=4mW
20 30 45 mA
Deferential Efficiency
η CW, Pf=4mW Tc=25°C
0.1 0.13 - mA
Tc=75°C
0.06 0.09
-
Differential impedance
Rs -
3 6 10 Ω
Optical output power from
fiber end
Pf CW, nominal
4 mW
Light-emission central
wavelength
λc CW, APC
(Note 1)
-Fx49Mx1
-Fx49Mx2
1467 1470 1473
1487 1490 1493
nm
nm
-Fx49Mx3
1507 1510 1513 nm
-Fx49Mx4
1527 1530 1533 nm
-Fx49Mx5
1547 1550 1553 nm
-Fx49Mx6
1567 1570 1573 nm
-Fx49Mx7
1587 1590 1593 nm
-Fx49Mx8
1607 1610 1613 nm
Wavelength temperature
coefficient
λct CW, APC
- 0.1 0.11 nm/°C
Side mode suppression ratio
Sr CW, APC
30 45 - dB
Tracking error (Note 2)
Er CW, APC
- 0.5 1.25 dB
2nd order distortion
3rd order distortion
D2 2 tone test (Note 3)
D3 f1=13MHz, f2=19MHz
m=10%/tone, Pf=4mW
- - -50 dBc
- - -60
Relative intensity noise
Nr CW, APC, f=200MHz
- -155 -145 dB/Hz
(Note 4)
Spurious Noise (Carrier On)
NspON 2-tone, m=10%/tone
- -50 -45 dBc
Spurious Noise (Carrier Off) NspOFF Imon=Imonop (Note 5)
- -35 -25 dBc
Monitor current
Imon CW, Pf=4mW, Vrd=5V
0.05 -
- mA
Dark current (PD)
Id Vrd=5V
- - 0.1 μA
Capacitance (PD)
Ct Vrd=5V, f=1MHz
- - 10 pF
Note 1) “APC” represents operating LD by a constant monitor current for Pf=4mW at Tc=25°C.
Note 2) Er=max|10×log(Pf / Pf@25°C)|
Note 3) Optical return loss of the connectors should be greater than 40dB in order to get the specified performance.
Note 4) Relative intensity noise dose not includes shot noise of receiver.
Note 5) Spurious noise is defined under the following test condition.
2-tone carrier frequency
: f1=13MHz, f2=19MHz
Fiber length
: 15km
Measurement frequency
: 5~200MHz
Spectrum analyzer setting : Resolution bandwidth 100kHz, video bandwidth 30kHz and 30 second
max hold.
FIBER PIGTAIL SPECIFICATIONS
Parameter
Limits
Type
SM
Mode field diameter
9.5+/-1
Cladding diameter
125+/-2
Secondary coating outer diameter
0.9+/-0.1
Lfiber(Note 6)
1000+/-100
Connector
See ordering information
Optical return loss of connector
See ordering information
Note 6) ‘Lfiber’ is the fiber length that is defined in OUTLINE DIAGRAM.
Unit
-
μm
μm
mm
mm
-
dB
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL


Features Datasheet pdf MAY06 (1/5) MITSUBISHI (OPTICAL DEVICES) FU-650SDF-Fx49Mxx 1.55 μm DFB-LD MOD ULE WITH SINGLEMODE FIBER PIGTAIL DESCR IPTION Module type FU-650SDF-Fx49Mxx is a 1.5μm coaxial Uncooled DFB-LD modul e with single-mode optical fiber. This module is suitable for a light source o f analog applications such CATV return path. FEATURES l High liniality multi quantum wells (MQW) DFB-LD l Emission w avelength is in 1.55μm band l CWDM 8ch selectable l Built-in optical isolator l Coaxial package l With photodiode fo r optical output monitor APPLICATION CA TV return path Analog transmission syst ems www.DataSheet4U.com ABSOLUTE MAXI MUM RATINGS (Tc=25°C) Parameter Symbol Laser diode Optical output power Pf Fo rward current If Reverse voltage Vrl Ph otodiode Reverse voltage Vrd Forward cu rrent Ifd Operating case temperature Tc Storage temperature Tstg Conditions C W CW - Rating 10 150 2 20 2 -5 ~ +75 - 40 ~ +85 Unit mW mA V V mA °C °C Mi tsubishi Electric Corporation reserves the right to make changes to t.
Keywords FU-650SDF-FW49Mxx, datasheet, pdf, Mitsubishi Electric, DFB-LD, MODULE, U-650SDF-FW49Mxx, -650SDF-FW49Mxx, 650SDF-FW49Mxx, FU-650SDF-FW49Mx, FU-650SDF-FW49M, FU-650SDF-FW49, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)