DI-8B47 Input Modules Datasheet

DI-8B47 Datasheet, PDF, Equivalent


Part Number

DI-8B47

Description

Linearized Thermocouple Input Modules

Manufacture

ETC

Total Page 2 Pages
Datasheet
Download DI-8B47 Datasheet


DI-8B47
DI-8B47 Linearized Thermocouple Input Modules
FEATURES
• Interfaces to Types J, K and T
• Linearizes Thermocouple Signal
• High Level Voltage Outputs
• 1500Vrms Transformer Isolation
• ANSI/IEEE C37.90.1
• Input Protected to 240VAC Continu-
ous
• 120dB CMR
• 70dB NMR at 60Hz
• Low Drift with Ambient Temperature
• Accurate CJC -40°C to +85°C
• CSA, FM, and CE Certifications
Pending
• Mix and Match Module Types
DESCRIPTION
DI-8B modules are an optimal solution
for monitoring real-world process signals
and providing high level signals to a data
acquisition system. Each DI-8B47 module
isolates, filters, amplifies, and linearizes a
single channel of temperature input from
www.DataSheet4aU.tchomermocouple and provides an analog
voltage output.
Linearization is accomplished using a four
breakpoint piecewise linear approximation.
The DI-8B47 can interface to industry
standard thermocouple type J, K, and T and
has an output signal of 0V to +5V. Each
module is cold-junction compensated to
correct for parasitic thermocouples formed
by the thermocouple wire and screw termi-
nals on the mounting backpanel. Upscale
open thermocouple detect is provided by
an internal pull-up resistor.
Signal filtering is accomplished with a
three-pole filter optimized for time and
frequency response which provides 70dB
of normal-mode-rejection at 60Hz. One
pole of this filter is on the field side of the
isolation barrier for anti-aliasing, and the
other two are on the system side.
A special input circuit on the DI-8B47
module provides protection against ac-
cidental connection of power-line voltages
up to 240VAC.
The modules are designed for installation
in Class I, Division 2 hazardous locations
and have a high level of immunity to envi-
ronmental noise.
SPECIFICATIONS
Typical at TA = +25ºC and +5V Power
DI-8B47
Input Range
-0.1V to +0.5V
Input Bias Current
-25nA
Input Resistance
Normal
Power Off
Overload
50MΩ
450kΩ
450kΩ
Input Protection
Continuous
Transient
240VAC
ANSI/IEEE C37.90.1
Sensor Excitation Current
0.25mA
Lead Resistance Effect
±0.02˚C/Ω¹
CMV, Input to Output
1500Vrms max
Transient, Input to Output
ANSI/IEEE C37.90.1
CMR (50Hz or 60Hz)
120dB
NMR
70dB at 60Hz
Accuracy
See Ordering Information on Page 2
Stability
Offset
Gain
±20ppm/ºC
±75ppm/ºC
Noise
Output, 100kHz
250µVrms
Bandwidth, -3dB
3Hz
Response Time, 90% Span
150ms
Output Range
0 to +5V
Output Protection
Transient
Continuous Short to Ground
ANSI/IEEE C37.90.1
Cold Junction Compensation
Accuracy, 25ºC
Accuracy, -40ºC to +85ºC
±0.5ºC
±1.5ºC
Power Supply Voltage
+5VDC ±5%
Power Supply Current
30mA
Power Supply Sensitivity
±25ppm/%
Mechanical Dimensions
1.11" × 1.65" × 0.40"
(28.1mm × 41.9mm × 10.2mm)
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
-40ºC to +85ºC
-40ºC to +85ºC
0 to 95% Noncondensing
DATAQ Instruments, Inc. • 241 Springside Drive • Akron, Ohio 44333 • Tel: 330-668-1444 • Email: support@dataq.com • www.dataq.com

DI-8B47
DI-8B47 Linearized Thermocouple Input Module
Block Diagram
Ordering Information
Model Number TC Type
Input Range
DI-8B47J-01
J
0°C to +760°C (+32°F to +1400°F)
DI-8B47J-02 J -100°C to +300°C (-148°F to +572°F)
DI-8B47J-03
J
0°C to +500°C (+32°F to +932°F)
DI-8B47J-12
J -100°C to +760°C (-148°F to +1400°F)
DI-8B47K-04
K
0°C to +1000°C (+32°F to +1832°F)
DI-8B47K-05
K
0°C to +500°C (+32°F to +932°F)
DI-8B47K-13
K -100°C to +1350°C (-148°F to +2462°F)
DI-8B47K-14
K
0°C to +1200°C (+32°F to +2192°F)
DI-8B47T-06 T -100°C to +400°C (+32°F to +392°F)
DI-8B47T-07
T
0°C to +200°C (+32°F to +392°F)
* Includes conformity, hysteresis, and repeatability. Does not include CJC Accuracy.
Accuracy*
±0.24% ±1.82°C
±0.24% ±0.96°C
±0.21% ±1.05°C
±0.24% ±2.10°C
±0.24% ±2.40°C
±0.24% ±1.05°C
±0.24% ±3.60°C
±0.24% ±2.88°C
±0.48% ±2.40°C
±0.39% ±0.75°C
DATAQR
INSTRUMENTS
241 Springside Drive
Akron, Ohio 44333
330-668-1444
Data Acquisition Product Links
(click on text to jump to page)
Data Acquisition | Data Logger | Chart Recorder | Thermocouple | Oscilloscope
The information on this data sheet is subject to change without notice.
DATAQ and the DATAQ logo are registered trademarks of DATAQ Instruments, Inc. All rights reserved. Copyright © 2005 DATAQ Instruments, Inc.


Features DI-8B47 Linearized Thermocouple Input Mo dules FEATURES • Interfaces to Types J, K and T • Linearizes Thermocouple Signal • High Level Voltage Outputs 1500Vrms Transformer Isolation • A NSI/IEEE C37.90.1 • Input Protected t o 240VAC Continuous • 120dB CMR • 7 0dB NMR at 60Hz • Low Drift with Ambi ent Temperature • Accurate CJC -40°C to +85°C • CSA, FM, and CE Certific ations Pending • Mix and Match Module Types SPECIFICATIONS Input Range Inpu t Bias Current Input Resistance Typica l at TA = +25ºC and +5V Power DI-8B47 -0.1V to +0.5V -25nA Normal Power Off Overload Continuous Transient 50MΩ 45 0kΩ 450kΩ 240VAC ANSI/IEEE C37.90.1 0.25mA ±0.02˚C/Ω¹ 1500Vrms max ANS I/IEEE C37.90.1 120dB 70dB at 60Hz See Ordering Information on Page 2 ±20ppm/ ºC ±75ppm/ºC 250µVrms 3Hz 150ms 0 t o +5V Continuous Short to Ground ANSI/I EEE C37.90.1 ±0.5ºC ±1.5ºC +5VDC ± 5% 30mA ±25ppm/% 1.11" × 1.65" × 0.4 0" (28.1mm × 41.9mm × 10.2mm) -40ºC to +85ºC -40ºC to +85ºC 0 to 95% Noncondensing Input Protection Sensor Excit.
Keywords DI-8B47, datasheet, pdf, ETC, Linearized, Thermocouple, Input, Modules, I-8B47, -8B47, 8B47, DI-8B4, DI-8B, DI-8, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)