Oscillator. VS-502 Datasheet

VS-502 Oscillator. Datasheet pdf. Equivalent


Part Number

VS-502

Description

Voltage Controlled SAW Oscillator

Manufacture

Vectron International

Total Page 8 Pages
Datasheet
Download VS-502 Datasheet


VS-502
Product Data Sheet
PRELIMINARY
VS-502
Voltage Controlled SAW Oscillator
www.DataSheet4U.com
Features
Output frequencies from 300 MHz to 1350 MHz
Ultra low jitter < 0.2 ps-rms (12 kHz to 20 MHz)
< 0.2 ps-rms (50 kHz to 80 MHz)
Low phase noise, -160 dBc/Hz @ 1 MHz offset (1 GHz)
Small low profile 9.0 * 14.0 * 4.5 mm SMT package
3.3 V, 5.0 V and 12V Supply Options
LV-PECL, PECL, or Sinewave (0 to +10 dBm into 50 Ώ)
Output disable feature (For LVPECL - PECL option)
Product is free of lead and compliant to
EC RoHS Directive
Applications
Point to Point / Point to Multi Point Radios
Instrumentation
PLL Frequency Translation
Test & Measurement
Military & Avionics
Description
The VS-502 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW
resonator. This direct approach enables this series to achieve
low phase noise and jitter performance at high output
frequencies and over wide operating temperature range. The
oscillator is housed in a hermetically sealed J-lead surface
mount package offered on tape and reel. As an option, it has
an output disable to facilitate on-board test
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
1
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Rev: 27January06

VS-502
VS-502 Voltage Controlled SAW Oscillator
Table 1. Electrical Performance
Parameter
Frequency
Center Frequency
Absolute Pull Range
Linearity (+12V Supply)
Linearity (+5V Supply)
Linearity (+3.3V Supply)
Gain Transfer
Temperature Stability (-40ºC to +85ºC)
Supply
Voltage (B)
Voltage (C)
Voltage (D) - PECL Output Only
Current (No Load)
Output- Sinewave Options
Sinewave, into 50 Ώ (G)
Sinewave, into 50 Ώ (H)
Sinewave, into 50 Ώ (J)
Sinewave, into 50 Ώ (K)
Harmonics
Jitter @ 622.08 MHz (12 kHz to 20 MHz)
Jitter @ 622.08 MHz (50 kHz to 80 MHz)
Output- PECL Logic Option (F)
Output Level Low
Output Level High
Rise & Fall Time
Symmetry (Duty Cycle)
Control Voltage
Input Impedance
Modulation BW (Driven from Low Impedance)
Operating Temperature
Package Size
Symbol Minimum Typical Maximum Units
FN
APR
300
± 50
+ 350
± 200
1350
± 20
± 10
± 10
MHz
ppm
%
%
%
ppm/V
ppm
VCC 11.4
VCC 4.75
VCC 3.135
ICC
PO 0
PO +3
PO +7
PO +10
12
5
3.3
55
0.10
0.10
12.6
5.25
3.450
70
V
V
V
mA
dBm
dBm
dBm
dBm
-20 dBc
ps,rms
ps,rms
VOL
VOL
tR,tF
SYM
VCC-0.98
45
200
49/51
VCC-1.63
350
55
V
V
ps
%
ZC 104 110 115 k Ώ
BW 100 kHz
TOP See Ordering Table
ºC
9.0 x 14.0 x 4.5
mm
Notes
1,2
9,2,3
4,2,9,3
4,2,9,3
4,2,9,3
2,8
6,9
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
2,3
7,6
7,6
2,3,5
2,3,5
2,3,5
2,3,5
6
6
1,3
Table Notes:
1. See Standard Frequencies and Ordering Information
2. Parameters are tested with production test circuit
3. Parameters are tested at ambient temperature with test limits guard-banded for specified operating temperature.
4. Measured as the maximum deviation from the best straight-line fit, per MIL-0-55310.
5. Output levels are standard 100K PECL compatible and measured from 20% to 80% of a full output swing (Fig 1).
6. Not tested in production, guaranteed by design, verified at qualification.
7. Integrated across 12 kHz to 20 MHz, or 50 KHz to 80 MHz per GR-253-CORE Issue3.
8. Tested with Vc = 0.3V to 3V for 3.3V supply, Vc = 0.5V to 4.5 V for 5V supply, Vc = 0.5V to 11.5V for 12V supply
9. Maximum frequency occurs at room temperature
Table 2. Typical Single Side-Band Phase Noise (dBc/Hz) for Sinewave Output
Output Frequency 100 Hz Offset
1 kHz Offset
10 kHz Offset
100 kHz Offset
1 MHz Offset
640 MHz
-75
-110
-135
-150
-160
1000 MHz
-65
-95
-125
-150
-155
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1 Website: www.vectron.com
2 Rev: 27January06


Features Product Data Sheet PRELIMINARY VS-502 Voltage Controlled SAW Oscillator Feat ures • Output frequencies from 300 MH z to 1350 MHz • Ultra low jitter < 0. 2 ps-rms (12 kHz to 20 MHz) < 0.2 ps-rm s (50 kHz to 80 MHz) • Low phase nois e, -160 dBc/Hz @ 1 MHz offset (1 GHz) Small low profile 9.0 * 14.0 * 4.5 m m SMT package • 3.3 V, 5.0 V and 12V Supply Options • LV-PECL, PECL, or Si newave (0 to +10 dBm into 50 Ώ) www.Da taSheet4U.com • Output disable featu re (For LVPECL - PECL option) Product i s free of lead and compliant to EC RoHS Directive Applications • Point to P oint / Point to Multi Point Radios • Instrumentation • PLL Frequency Trans lation • Test & Measurement • Milit ary & Avionics Description The VS-502 is a SAW based voltage controlled oscil lator that operates at the fundamental frequency of the internal SAW resonator . This direct approach enables this ser ies to achieve low phase noise and jitt er performance at high output frequencies and over wide operating temperature range. The.
Keywords VS-502, datasheet, pdf, Vectron International, Voltage, Controlled, SAW, Oscillator, S-502, -502, 502, VS-50, VS-5, VS-, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)