CATV Amplifier. MAAMSS0031 Datasheet


MAAMSS0031 Amplifier. Datasheet pdf. Equivalent


MAAMSS0031


Broadband CATV Amplifier
Broadband CATV Amplifier, 50 - 1000 MHz
Features
• • • • • Low Cost Plastic SOT-89 Package 75 Ohm Input / Output Match -80 dBc CTB 2.7 dB Noise Figure 14.8 dB Gain

MAAMSS0031 V2
Functional Schematic
GND

Description
M/A-COM’s MAAMSS0031 CATV amplifier is a GaAs MMIC which exhibits low distortion in a low-cost miniature surface mount plastic package. The MAAMSS0031 employs a monolithic single stage design featuring a convenient 75 ohm input/ output impedance that minimizes the number of external components required. The MAAMSS0031 provides low noise and high linearity. It is ideally suited for set top boxes, home gateways, and other broadband internet based appliances. The MAAMSS0031 is fabricated using M/A-COM’s PHEMT process to realize low noise and low www.DataSheet4U.com distortion. The process features full passivation for robust performance and reliability.

Pin 1

RFIN

GND

RFOUT

Pin Configuration
PIN No.
1 2 3

PIN Name
RFIN GND RFOUT

Description
RF Input Ground RF Output / Drain Supply

Ordering Information
Part Number
MAAMSS0031 MAAMSS0031TR MAAMSS0031TR-3000 MAAMSS0031SMB-01 MAAMSS0031SMB-02

Absolute Maximum Ratings 1
Package Parameter
RF Input Power Voltage Operating Temperature Storage Temperature

Absolute Maximum
15 dBm 10.0 volts -40 °C to +85 °C -65 °C to +150 °C

SOT-89 Plastic Package 1000 Piece Tape and Reel 3000 Piece Tape and Reel Sample Test Board (In...



MAAMSS0031
Broadband CATV Amplifier,
50 - 1000 MHz
Features
Low Cost Plastic SOT-89 Package
75 Ohm Input / Output Match
-80 dBc CTB
2.7 dB Noise Figure
14.8 dB Gain
Description
M/A-COM’s MAAMSS0031 CATV amplifier is a
GaAs MMIC which exhibits low distortion in a
low-cost miniature surface mount plastic package.
The MAAMSS0031 employs a monolithic single
stage design featuring a convenient 75 ohm input/
output impedance that minimizes the number of
external components required.
The MAAMSS0031 provides low noise and high
linearity. It is ideally suited for set top boxes, home
gateways, and other broadband internet based
appliances.
The MAAMSS0031 is fabricated using M/A-COM’s
PHEMT process to realize low noise and low
www.DataSheet4U.comdistortion. The process features full passivation for
robust performance and reliability.
Ordering Information
Part Number
MAAMSS0031
MAAMSS0031TR
MAAMSS0031TR-3000
MAAMSS0031SMB-01
MAAMSS0031SMB-02
Package
SOT-89 Plastic Package
1000 Piece Tape and Reel
3000 Piece Tape and Reel
Sample Test Board
(Includes 5 Samples)
Enhanced IRL & Gain
Sample Test Board
(Includes 5 Samples)
Note: Reference Application Note M513 for reel size
information.
Functional Schematic
GND
MAAMSS0031
V2
Pin 1
RFIN GND RFOUT
Pin Configuration
PIN No.
1
2
3
PIN Name
RFIN
GND
RFOUT
Description
RF Input
Ground
RF Output / Drain Supply
Absolute Maximum Ratings 1
Parameter
RF Input Power
Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
15 dBm
10.0 volts
-40 °C to +85 °C
-65 °C to +150 °C
1. Exceeding any one or combination of these limits may
cause permanent damage to this device.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to
the product(s) or information contained herein without notice.
M/A-COM makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does
M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

MAAMSS0031
Broadband CATV Amplifier,
50 - 1000 MHz
MAAMSS0031
V2
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +8 Volts, Z0 = 75 Ohms
Parameter
Gain
Gain Flatness 2
Noise Figure
Input Return Loss 2
Output Return Loss
Output IP3
Composite Triple Beat, CTB
Composite Second Order, CSO
P1dB
IDD
Test Conditions
6 MHz Spacing, -10 dBm output per tone
132 channels, +23 dBmV/channel at the output.
132 channels, +23 dBmV/channel at the output.
+ 8 Volts
Units
dB
dB
dB
dB
dB
dBm
dBc
dBc
dBm
mA
Min.
14.0
Typ.
14.8
0.5
2.7
20
18
36
-80
-70
23
100
2. For improved Input Return Loss and Gain Flatness use the schematic and component values as indicated on page 4.
Max.
16.0
1.0
3.8
130
Schematic Including Off-Chip
Components
Recommended Board Layout
RF IN
Pin 1
C1 C4
R1
L2
C2
L1
VDD
C3
RFOUT
Off-Chip Component Values
Component
C1
C2
C3
C4
L1
L2
R1
Value
0.01 µF
0.01 µF
0.01 µF
0.01 µF
560 nH
8.2 nH
523
Package
0402
0402
0402
0402
1210
0402
0402
2
M/A-COM Inc. and its affiliates reserve the right to make changes to
the product(s) or information contained herein without notice.
M/A-COM makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does
M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)