Gain Block. ECG001F Datasheet

ECG001F Block. Datasheet pdf. Equivalent

Part ECG001F
Description InGaP HBT Gain Block
Feature www.DataSheet4U.com ECG001F InGaP HBT Gain Block Product Features DC – 6 GHz +12.5 dBm P1dB at 1 G.
Manufacture WJ Communication
Total Page 5 Pages
Datasheet
Download ECG001F Datasheet



ECG001F
ECG001Fwww.DataSheet4U.com
InGaP HBT Gain Block
Product Features
DC – 6 GHz
+12.5 dBm P1dB at 1 GHz
+25 dBm OIP3 at 1 GHz
22 dB Gain at 1 GHz
3.4 dB Noise Figure
Available in lead-free / green
SOT-363 package
Internally matched to 50
Applications
Mobile Infrastructure
CATV / FTTX
W-LAN / ISM
RFID
WiMAX / WiBro
Product Description
Functional Diagram
The ECG001F is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 1000 MHz, the ECG001F typically provides
22 dB of gain, +25 dBm Output IP3, and +12.5 dBm P1dB.
The ECG001F consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in a low-
cost, surface-mountable lead-free/green/RoHS-compliant
SOT-363 package. All devices are 100% RF and DC
tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG001F will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and mobile wireless.
GND 1
GND 2
RF IN 3
Function
Input
Output/Bias
Ground
6 RF OUT
5 GND
4 GND
Pin No.
3
6
1, 2, 4, 5
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 (2)
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dB
V
mA
Min
DC
19.2
3.0
Typ
1000
22.2
+12.5
+25
2000
20.7
35
18
+12.5
3.4
3.4
30
Max
6000
21.8
3.8
1. Test conditions unless otherwise noted: 25 ºC, Supply Voltage = +5 V, Rbias = 51 , 50 System.
Typical Performance (1)
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 (2)
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
500 900 1900 2140
22.6 22.4 20.9 20.6
-46 -42 -35 -29
-29 -24 -18 -17
+12 +12.5 +12.5 +12.5
+23 +25 +26 +26
3.4 3.4 3.4 3.4
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
Device Current
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +150 °C
150 mA
+12 dBm
+250 °C
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No.
ECG001F-G
ECG001F-PCB
Description
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-363 package)
700 – 2400 MHz Fully Assembled Eval. Board
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 1 of 5 April 2007



ECG001F
ECG001F
InGaP HBT Gain Block
Typical Device RF Performance
Supply Bias = +5 V, Rbias = 51 , Icc = 30 mA
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
MHz
dB
dB
dB
dBm
dBm
dB
100
22.8
-48
-34
+11.6
+23.6
3.4
500
22.6
-46
-29
+11.6
+23.5
3.4
900
22.4
-42
-24
+12.6
+24.8
3.4
1900
20.9
-35
-18
+12.6
+26
3.4
2140
20.6
-29
-17
+12.6
+25.6
3.4
2400
20.2
-28
-16
+12.8
+25.4
3.4
3500
18.6
-22
-13
+12.2
+23
5800
15.5
-14
-8
+11
1. Test conditions: T = 25º C, Supply Voltage = +5 V, Device Voltage = +3.4 V, Rbias = 51 , Icc = 30 mA typical, 50 System.
2. 3OIP measured with two tones at an output power of -1 dBm/tone separated by 1 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit.
Return Loss
Gain (dB)
0
24
D B (|S (2 ,1 )|)
Icc vs. Vde
100
22 -10 80
20
18
16
14
0123456
Frequency (GHz)
-20
-30
S11 S22
-40
0123456
Frequency (GHz)
60
40
20
0
3.2
3.3 3.4 3.5
Vde (V)
OIP3 vs. Frequency
28
Noise Figure vs. Frequency
5
P1dBvs. Frequency
18
26 4 16
14
3
24 12
2
22
+25C -40C +85C
20
1
0
10
8
+25C -40C +85C
6
500 1000 1500 2000 2500 3000 50 0 10 00 15 00 20 00 25 00 30 00 500 1000 1500 2000 2500
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
3.6
3000
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 2 of 5 April 2007





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)