Level Mixer. MAMXSS0010 Datasheet

MAMXSS0010 Mixer. Datasheet pdf. Equivalent

Part MAMXSS0010
Description MMIC Medium Level Mixer
Feature www.DataSheet4U.com RoHS Compliant MAMXSS0010 V2 Functional Diagram C MMIC Medium Level Mixer 1700.
Manufacture Tyco Electronics
Total Page 3 Pages
Datasheet
Download MAMXSS0010 Datasheet



MAMXSS0010
www.DataSheet4U.com
MMIC Medium Level Mixer
1700 - 2000 MHz
Features
Low Conversion Loss
Input Power @ 1 dB Compression: +21 dBm
Typical Two-Tone IM Ratio: > 50 dBc
LO Drive Level: +11 to +23 dBm
DC - 200 MHz IF Bandwidth
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MD54-0003
Description
M/A-COM’s MAMXSS0010 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free surface mount plastic
SOIC-8 package. The MAMXSS0010 is ideally
suited for use where high level RF signals and very
wide dynamic range are required.
Typical applications include frequency up/down
conversion, modulation, demodulation in systems
such as base station receivers and transmitters for
DCS1800, PCS and PHS applications.
The MAMXSS0010 uses FETs as mixing elements
to achieve very wide dynamic range in a low cost
plastic package. The mixer operates with LO drive
levels of +11 dBm to +23 dBm. No DC bias is
required.
M/A-COM’s MAMXSS0010 is fabricated using a
mature 1-micron GaAs process. The process
features full IC passivation for increased
performance and reliability.
Ordering Information
Part Number
MAMXSS0010
MAMXSS0010TR
MAMXSS0010SMB
Package
Bulk Packaging
1000 piece reel
Designer’s Kit
Note: Reference Application Note M513 for reel size
information.
RoHS
Compliant
Functional Diagram
MAMXSS0010
V2
C
L
R
8765
1234
External matching network on LO Port: R = 330 ohms, L = 3 nH, C = 3.3 pF
Pin Configuration
Pin No.
1
2
3
4
Function
Ground
RF Port
Ground
Ground
Pin No.
5
6
7
8
Function
Ground
LO Port
IF Port
Ground
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MAMXSS0010
MMIC Medium Level Mixer
1700 - 2000 MHz
RoHS
Compliant
MAMXSS0010
V2
Electrical Specifications:
Test Conditions: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (13 dBm), IF = 140 MHz, TA = +25°C
Parameter
Test Conditions
Conversion Loss
Isolation
VSWR
Input 1 dB Compression
Two-Tone IM Ratio1
LO to RF
LO to IF
RF to IF
LO Port
RF Port
IF Port
RF Freq. = 1800 MHz, LO = +13 dBm
Two tones at –10 dBm each,
Tone spacing 100 kHz, IF = 140 MHz
1. IMR vs RF drive level can be calculated by the formula: IMR = 50 - (1.5 x P IN )
Units
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBc
Min
50
Typ
8.5
27
12
10
2.5:1
2.0:1
2.0:1
+21
65
Max
9.5
Absolute Maximum Ratings2,3
Parameter
RF Input Power4
LO Drive Power4
Operating Temperature
Storage Temperature
Absolute Maximum
+22 dBm
+23 dBm
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. Total combined power for RF and LO ports should not
exceed +23 dBm.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Spurious Table
4x 17 48.2 62.3 71.7
6.9 47.2 61.1 61.7
3x 10.3 28.9 63.0 71.3
0.3 28.9 61.3 63.5
2x -8.8 -25.7 52.1 71.5
-18.8 25.9 61.3 61.5
1x -13.1 0 67.5 71.3
-23.1 0 61.1 61.9
0x X 2.1 56.8 72.3
X 2.1 61.7 62.3
0x 1x 2x 3x
Harmonic of RF
73.4
63.4
70.6
61.6
72.1
62.1
72.6
62.6
69.3
59.8
4x
The spurious table shows the spurious signals resulting from the
mixing of the RF and LO input signals, assuming down
conversion. Mixing products are indicated by the number of dB
below the conversion loss. The lower frequency mixing term is
shown for two different RF input levels. The top number is for an
RF input power of -5 dBm, the lower number is for -15 dBm.
|mFRF - nFLO |, RF = -5 dBm
|mFRF - nFLO |, RF = -15 dBm
RF Frequency = 1850 MHz
LO Frequency = 1710 MHz
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)