MMIC Mixer. MAMXSS0013 Datasheet

MAMXSS0013 Mixer. Datasheet pdf. Equivalent

Part MAMXSS0013
Description Low Cost MMIC Mixer
Feature www.DataSheet4U.com RoHS Compliant MAMXSS0013 V2 Functional Block Diagram RF 4 3 Low Cost MMIC Mix.
Manufacture Tyco Electronics
Datasheet
Download MAMXSS0013 Datasheet



MAMXSS0013
www.DataSheet4U.com
Low Cost MMIC Mixer
1400 - 2100 MHz
RoHS
Compliant
MAMXSS0013
V2
Features
+12 dBm Input Power @ 1 dB Compression
High Isolation, 28 dB LO to RF
+3 to +8 dBm LO Drive Level
DC - 500 MHz 3 dB IF Bandwidth
Does not require DC bias
Lead-Free SOT-25 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MD54-0006
Functional Block Diagram
RF 4
3
IF 5
2
1
R1
L1 LO
C1
Description
M/A-COM’s MAMXSS0013 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free SOT-25 package. The
MAMXSS0013 is ideally suited for use where high
level RF signals and very wide dynamic range are
required. Typical applications include frequency up/
down conversion, modulation and demodulation in
receivers and transmitters for base station and
portable systems.
The MAMXSS0013 uses FETs as mixing elements
to achieve very wide dynamic range in a low cost
plastic package. The mixer operates with LO drive
levels of +3 dBm to +8 dBm. The LO port may be
externally tuned for operation in various frequency
bands.
M/A-COM’s MAMXSS0013 is fabricated using a
mature 0.5 micron gate length GaAs MESFET
process. The process features full passivation for
increased performance and reliability. The
MAMXSS0013 is 100% RF tested to ensure
performance specification compliance.
Ordering Information1
Part Number
MAMXSS0013
MAMXSS0013TR-3000
MAMX-000013-001SMB
MAMX-000013-002SMB
MAMX-000013-003SMB
Package
Bulk Packaging
3000 piece reel
1500 MHz Configuration
1710 MHz Configuration
2300 MHz Configuration
1. Reference Application Note M513 for reel size information.
Pin Configuration
Pin No.
1
2
3
4
5
Pin Name
LO Port
Ground
Ground
RF Port
IF Port
Description
LO Input
Ground
Ground
RF Input
IF Output
External Circuitry Parts List 2,3
LO Frequency
Part
1500 MHz 1710 MHz 2300 MHz
R1
470
470
820
L1
6.8 nH
4.7 nH
2.7 nH
C1
3.3 pF
2.2 pF
2.2 pF
2. The external LO matching network allows tuning from 1400
MHz to 2300 MHz. The networks given above are
intended to serve as guidelines for matching in different bands.
3. All off-chip components are low-cost surface mount
components obtainable from multiple sources (0.060 in. x
0.030 in. or 0.080 in. x 0.050 in).
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.



MAMXSS0013
Low Cost MMIC Mixer
1400 - 2100 MHz
RoHS
Compliant
MAMXSS0013
V2
Electrical Specifications4:
RF = 1850 MHz (-10 dBm), LO = 1710 MHz (+5 dBm), IF = 140 MHz, TA = 25°C
Parameter
Conversion Loss
Isolation
VSWR
Input 1 dB Compression
Two-Tone IM Ratio 5
Test Conditions
LO to RF
LO to IF
RF to IF
RF Port
LO Port 3
IF Port
LO = +5 dBm, RF Freq: 1850 MHz
Two Tones at -10 dBm each, Tone spacing = 100 KHz,
IF = 140 MHz
Units
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBc
Min.
Typ.
8.0
28
15
15
2.0:1
2.0:1
2.0:1
12
55
4. With external LO Port matching. See functional block diagram.
5. IMR vs. RF drive can be calculated by the formula: IMR = 40-1.5*Pin.
Max.
9.0
Absolute Maximum Ratings 6,7
Parameter
Absolute Maximum
RF Input Power
+27 dBm
LO Drive Power
+27 dBm
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM does not recommend sustained operation near
these survivability limits.
Spurious Table
4x
38.3 41.3 45.4 64.7 57.0
27.3 39.9 52.5 77.1 78.7
3x
21.4 30.1 69.0 43.0 68.3
10.5 30.1 70.5 58.8 76.8
2x
9.0 36.1 36.0 65.8 64.3
-0.9 36.4 45.8 75.0 78.0
1x
1.9
-6.0
0
0
44.8
55.5
56.1
75.2
65.0
78.3
0x
X
X
8.1 45.5 56.8 72.9
8.3 54.4 72.3 74.3
0x 1x 2x 3x 4x
Harmonic of RF
The spurious table shows the spurious signals resulting from the
mixing of the RF and LO input signals, assuming down
conversion. Mixing products are indicated relative to the IF. The
lower frequency mixing term is shown for two different RF input
levels. The top number is for an RF input power of 0 dBm, the
lower number is for -10 dBm.
|nFRF - mFLO |, RF = 0 dBm
|nFRF - mFLO |, RF = -10 dBm
RF Frequency = 1850 MHz
LO Frequency = 1710 MHz
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)