SPDT Switch. MASW-008075 Datasheet

MASW-008075 Switch. Datasheet pdf. Equivalent

Part MASW-008075
Description GaAs SPDT Switch
Feature www.DataSheet4U.com RoHS Compliant MASW-008075 V1 Functional Schematic C = 39 pF GaAs SPDT Switch .
Manufacture Tyco Electronics
Datasheet
Download MASW-008075 Datasheet



MASW-008075
www.DataSheet4U.com
GaAs SPDT Switch
DC - 3.0 GHz
Features
Low Insertion Loss: 0.4 dB @ 2.4 GHz
Moderate Isolation: 25 dB @ 2.4 GHz
Low Power Consumption: 5 μA @ +3.0 V
Lead-Free SC-70 (SOT-363) Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s MASW-008075 is a GaAs PHEMT
MMIC SPDT switch in a lead-free SC-70 (SOT-363)
surface mount plastic package. The MASW-008075
is ideally suited for applications where very small
size and low cost are required.
Typical applications are transmit / receive (Tx / Rx)
switching in linear systems such as WLAN
802.11b/g. Other applications include 1.9 GHz and
2.4 GHz DECT and linear systems operating up to
3.0 GHz.
The MASW-008075 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information 1
Part Number
Package
MASW-008075-000000
Bulk packaging
MASW-008075-TR3000
3000 piece reel
MASW-008075-001SMB
Sample Board
1. Reference Application Note M513 for reel size information.
RoHS
Compliant
Functional Schematic
MASW-008075
V1
C = 39 pF
V1 RFC V2
Pin 1
RF1 GND
C = 39 pF
RF2
C = 39 pF
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
Ground
RF Port 2
Control 2
RF Input
Control 1
Absolute Maximum Ratings 2,3
Parameter
Input Power (0.5 - 3.0 GHz)
3 V Control
Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+30 dBm
-8.5 V < Vc < +8.5 V
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASW-008075
GaAs SPDT Switch
DC - 3.0 GHz
RoHS
Compliant
MASW-008075
V1
Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 4
Parameter
Test Conditions
Units Min. Typ. Max.
Insertion Loss5
Isolation
1.0 GHz
2.4 GHz
1.0 GHz
2.4 GHz
dB — 0.3 —
dB — 0.4 0.5
dB — 23 —
dB 23 25 —
VSWR
0.05 - 3.0 GHz
Ratio
— 1.2:1 —
IIP2
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm — 80 —
IIP3
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm — 48 —
Input P1dB
— dBm — 28 —
Trise, Tfall
10% to 90% RF and 90% to 10% RF
nS — 35 —
Ton, Toff
50% control to 90% RF, 50% control to 10% RF
nS — 40 —
Transients
— mV — 10 —
Current
VC = 3.0 V
µA — 5 10
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz.
Truth Table 6,7
Lead-Free SC-70 (SOT-363)
Control
V1
Control
V2
RFC-RF1 RFC-RF2
0 1 On Off
1 0 Off On
6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V
minimum and must not exceed 8.5 V.
7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V
Handling Procedures
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Reference Application Note M538 for lead-free solder reflow
recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)