CATV Switch. MASWSS0069 Datasheet

MASWSS0069 Switch. Datasheet pdf. Equivalent

Part MASWSS0069
Description SPST High Isolation CATV Switch
Feature www.DataSheet4U.com 5 - 1000 MHz SPDT High Isolation CATV Switch Advanced A5 MASWSS0069 MASWSS0.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0069 Datasheet



MASWSS0069
SPDTwww.DataSheet4U.com High Isolation CATV Switch Advanced
5 - 1000 MHz
A5
MASWSS0069
Features
75 Ohms
Positive Voltage Control (0 / +5 V)
Non-reflective
Low Insertion Loss 0.74 dB at 870 MHz
High Isolation 52 dB at 870 MHz
4 mm FQFP-N 20 Lead Package
0.5 micron GaAs pHEMT Process
Description
M/A-COM’s MASWSS0069 is a GaAs PHEMT MMIC
single pole double throw (SPDT) switch in a low cost
miniature 4 mm FQFP-N 20 Lead package. The
MASWSS0069 is ideally suited for applications where
low control voltage, low insertion loss, high isolation,
small size and low cost are required. A typical application
is to replace mechanical relays in CATV systems. This
device has an additional state where both arms are off
and the device maintains a terminated and isolated state.
This state is achieved using a third control line. The
MASWSS0069 can be used in all 75 ohm systems oper-
ating up to 1 GHz.
The MASWSS0069 is fabricated using a 0.5 micron gate
length GaAs PHEMT process. The process features full
passivation for performance and reliability.
Ordering Information
Part Number
MASWSS0069
MASWSS0069TR
MASWSS0069SMB
Package
FQFP-N 20 Lead Plastic Package
7 inch, 1000 piece reel
Sample Test Board
Functional Schematic
GND GT1 V3 GT2 GND
RF1
GND
GND
GND
G1
RF2
GND
GND
GND
G2
V1 GND RFC GND V2
Absolute Maximum Ratings 1,2
Parameter
Max Input Power
(5 - 1000 MHz, 2.5V Control)
Operating Voltage
Operating Temperature
Storage Temperature
Absolute
Maximum
+32 dBm
+8.5 volts
-40 oC to +85 oC
-65 oC to +150 oC
1. Exceeding any one or combination of these limits may
cause permanent damage.
2. * RFC Port is reflective in ‘All Off’ state.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
„ North America: Tel. (800) 366-2266
1
„ Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
„ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020



MASWSS0069
SPDT High Isolation CATV Switch, 5 - 1000 MHz
Pin Configuration 1
PIN PIN Name
No.
1 RF1
2 GND
3 GND
4 GND
5 G1
6 V1
7 GND
8 RFC
9 GND
10 V2
11 G2
12 GND
13 GND
14 GND
15 RF2
16 GND
17 GT2
18 V3
19 GT1
20 GND
Description
RF In/Out
Ground
Ground
Ground
RF Ground
Control 1
Ground
RF In/Out
Ground
Control 2
RF Ground
Ground
Ground
Ground
RF In/Out
Ground
RF Ground
Control 3
RF Ground
Ground
MASWSS0069
Handling Procedures
A5
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are ESD
sensitive and can be damaged by static electric-
ity. Proper ESD techniques should be used
when handling these devices.
1. Center paddle should be connected to ground.
Truth Table 2
V1
+2.5 to +5V
0 + 0.2V
0 + 0.2V
V2
0 + 0.2V
+2.5 to +5V
0 + 0.2V
V3
0 + 0.2V
0 + 0.2V
+2.5 to +5V
RFC - RF1
On
Off
Off
2. External 0.01 uF DC blocking capacitors are required on
all RF In/Out and all RF Ground ports.
RFC - RF2
Off
On
Off
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
„ North America: Tel. (800) 366-2266
2
„ Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
„ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)