SPST Switch. MASWSS0166 Datasheet

MASWSS0166 Switch. Datasheet pdf. Equivalent

Part MASWSS0166
Description GaAs SPST Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0166 V2 Functional Schematic Positive Control Voltage GaA.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0166 Datasheet



MASWSS0166
www.DataSheet4U.com
GaAs SPDT Switch
DC - 3.0 GHz
RoHS
Compliant
MASWSS0166
V2
Features
Low Insertion Loss: 0.3 dB @ 900 MHz
Low Current Consumption: <15 µA @ +2.5 V
Positive or Negative 2.5 to 8 V Control
Lead-Free SOT-363 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of SW-437
Functional Schematic
Positive Control Voltage
Description
M/A-COM’s MASWSS0166 is a GaAs monolithic
switch in a lead-free SOT-363 surface mount plastic
package. The MASWSS0166 is ideally suited for
applications where very low power consumption, low
insertion loss, very small size and low cost are
required.
Functional Schematic
Negative Control Voltage
Typical applications are dual band systems that
require switching between small signal components
such as filter banks, single band LNA’s and
converters. The MASWSS0166 can be used in
applications up to 0.25 Watts in systems such as
cellular, PCS, DCS1800, GSM, CDMA, W-CDMA
and other analog/digital wireless communications
systems.
The MASWSS0166 is fabricated using a mature 0.5
micron GaAs PHEMT process. The process
features full passivation for increased performance
and reliability.
Absolute Maximum Ratings 1,2
Parameter
Absolute Maximum
Input Power (0.5-3.0 GHz)
3 V Control
5 V Control
+30 dBm
+33 dBm
Operating Voltage
+8.5 Volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
RF1
GND
RF2
V2
RFC
V1
Ordering Information
Description
RF in/out
RF Ground
RF in/out
V Control 2
RF Common
V Control 1
Part Number
MASWSS0166
MASWSS0166TR-3000
MASWSS0166SMB
Package
Bulk Packaging
3000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.



MASWSS0166
GaAs SPDT Switch
DC - 3.0 GHz
RoHS
Compliant
MASWSS0166
V2
Electrical Specifications: TA = 25°C, Vc = 0 V / -2.5 V, Z0 = 503
Parameter
Insertion Loss
Isolation
VSWR
Test Conditions
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 3 GHz
Units
dB
dB
dB
dB
dB
dB
Ratio
P1dB
P1dB
Input IP2
Input IP3
Trise, Tfall
Ton, Toff
Transients
Control Current
500 MHz - 3 GHz, Vc= 2.7 V
500 MHz - 3 GHz, Vc= 5 V
2-Tone, 900 MHz, 5 MHz spacing, Vc= 2.7 V
2-Tone 900 MHz, 5 MHz spacing, Vc= 2.7V
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In-Band
Vc= 2.5 V
dBm
dBm
dBm
dBm
nS
nS
mV
µA
3. For positive voltage control, external DC blocking capacitors are required on all RF ports.
Lead-Free SOT-363 Plastic Package
Truth Table 4,5
Min.
19
13
10
Typ.
0.3
0.4
0.55
21
15
12
1.2:1
24
27
81
55
10
20
10
4
Max.
0.4
0.5
0.7
15
V1 V2 RFC-RF1 RFC-RF2
0 1 On Off
1 0 Off On
4. Differential voltage, V(state 1) - V(state 0), must be
+2.5 V minimum and must not exceed 8 V.
5. 0 = -8 V to 0 V, 1 = -5.5 V to 8 V
Reference Application Note M538 for lead-free solder reflow
recommendations.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)