Synthesizer. MAVC-060103-130400 Datasheet

MAVC-060103-130400 Synthesizer. Datasheet pdf. Equivalent

Part MAVC-060103-130400
Description Synthesizer
Feature www.DataSheet4U.com Synthesizer , SMT 400 MHz Features ♦ ♦ ♦ ♦ RoHS Compliant Fully Integrated VCO,.
Manufacture Tyco Electronics
Datasheet
Download MAVC-060103-130400 Datasheet



MAVC-060103-130400
www.DataSheet4U.com
Synthesizer , SMT
400 MHz
Features
RoHS Compliant
Fully Integrated VCO, PLL, Loop Filter
High Performance, Low Cost
Miniature SMT Package (LSM6)
Description
This synthesizer design integrates a high performance VCO, PLL,
IC and discrete loop filter in a surface mount package. This SMT
package provides electrical shielding, easy PCB assembly and re-
peatable performance. The synthesizer is designed for use in wire-
less base stations.
M/A-COM synthesizers are manufactured in an ISO9001 certified
facility, incorporating surface mount assembly and automated elec-
trical testing. This ensures consistent electrical performance and
quality over volume production quantities.
MAVC-060103-130400
Rev: C
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc1 = 5V, Vcc2 = 3.3V.
Parameter
Frequency Range
RF Output Power
Phase Noise
Harmonic Suppression
Spurious Suppression
(Non-Harmonic)
Reference breakthrough
Frequency Lock Time
VCO Supply Current (ICC1)
PLL Supply Current (ICC2)
VCO Power Supply (VCC1)
PLL Power Supply (VCC2)
Test Conditions
Over Top 2
Over Top 2
SSB at 100 Hz offset from carrier
SSB at 1 kHz offset from carrier
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 1000 kHz offset from carrier
Phase comparison frequency
Other spurious
Over Fout , +/- 500Hz
Recommended operating condition
Recommended operating condition
Recommended operating condition
Recommended operating condition
Units
Min
Typ
Max
MHz
400
dBm
-3.0
+3.0
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-83
-83
-110
-130
-148
-80
-80
-105
-127
-145
dBc -25 -20
dBc -73 -70
dBc -85 -80
dBc -80
mS 20 30
mA 27 30
mA 9 10
V 4.75 5.0 5.25
V 3.1 3.3 3.5
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See “Absolute Maximum Ratings” for Top.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liabil-
ity whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MAVC-060103-130400
Synthesizer , SMT
400 MHz
Electrical Specifications1: (cont’d)
MAVC-060103-130400
Parameter
Step Size (ΔF)
Reference Frequency (FR)
PLL Programming
PLL Lock Monitor Output
Test Conditions
Units
Min
Typ
Recommended operating limit
kHz
1000
1.0 V pp ± 0.2V square wave with input filter
MHz
6
10
3-wire serial CMOS IAW ADF4113, Charge Pump max current
Logic high = VCC2 x 0.8 Min and Logic low = VCC2 x 0.2 Max
Locked = VCC2 - 0.4 Min , Unlocked = 0.4V Max
Max
100
Pin Configuration
Pin No.
1
2
3
4
5
6
7
Function
VCC2
GND
REF I/P
GND
VCC1
GND
RF O/P
Pin No.
8
9
10
11
12
13
14
Function
GND
Lock Detect
Clock
Data
Load Enable
GND
GND
Functional Block Diagram
1
10nF
2
VCC2
GND
3
REF IN
4
GND
5
10nF
6
VCC1
GND
TO CONTROLLER
13
GND
LOAD ENABLE
12
11
DATA
CLOCK 10
LOCK DETECT 9
GND
8
GND
14
RF OUT
7
50R
1. The diagram above shows a typical application.
2. The Reference input and RF output are internally AC cou-
pled.
3. The diagram applies when digital lock detect is selected. For
analog open-drain mode, a filter is required.
Absolute Maximum Ratings
TA = +25°C
Parameter
Absolute Maximum
VCO Supply Voltage (VCC1)
PLL Supply Voltage (VCC2)
Reference Frequency Level
-0.3V to 6.5 V
-0.3V to 6.5 V
-0.3V to 6.5 V
Data, Clock, Strobe
Voltages
Operating Temperature
-0.3V to Vcc + 0.3 V
-40°C to +85°C
Storage Temperature
-45°C to +120°C
Solder Assembly
Temperature
Weight
Moisture Sensitivity Level 2
ESD Rating
See App Note M2032
3.0 grams
2
Class 1
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. As per JEDEC-STD-020.
Environmental Specifications
Devices are designed to function after exposure to the
shock, vibration, thermal shock and moisture conditions
typically encountered in base station and other infra-
structure environments.
Ordering Information
Part Number
MAVC-060103-130400
Package
Tape and Reel (300/Reel) 1
1. See application note M513.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liabil-
ity whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)