Synthesizer. MAVC-060103-132100 Datasheet

MAVC-060103-132100 Synthesizer. Datasheet pdf. Equivalent

Part MAVC-060103-132100
Description Synthesizer
Feature www.DataSheet4U.com Synthesizer , SMT 2055 — 2265 MHz, 1000 kHz Features ♦ ♦ ♦ ♦ RoHS Compliant Ful.
Manufacture Tyco Electronics
Datasheet
Download MAVC-060103-132100 Datasheet



MAVC-060103-132100
www.DataSheet4U.com
Synthesizer , SMT
2055 — 2265 MHz, 1000 kHz
Features
RoHS Compliant
Fully Integrated VCO, PLL, Loop Filter
High Performance, Low Cost
Miniature SMT Package (LSM6)
Description
This synthesizer design integrates a high performance VCO, PLL,
IC and discrete loop filter in a surface mount package. This SMT
package provides electrical shielding, easy PCB assembly and re-
peatable performance. The synthesizer is designed for use in wire-
less base stations.
M/A-COM synthesizers are manufactured in an ISO9001 certified
facility, incorporating surface mount assembly and automated elec-
trical testing. This ensures consistent electrical performance and
quality over volume production quantities.
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc1 = 5V, Vcc2 = 3.3V.
Parameter
Frequency Range
RF Output Power
Phase Noise
Harmonic Suppression
Spurious Suppression
(Non-Harmonic)
Reference feed through
Frequency Lock Time
VCO Supply Current (ICC1)
PLL Supply Current (ICC2)
VCO Power Supply (VCC1)
PLL Power Supply (VCC2)
Test Conditions
Over Top 2
Over Top 2
SSB at 100 Hz offset from carrier
SSB at 1 kHz offset from carrier
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 1 MHz offset from carrier
Phase comparison frequency
Other spurious Output
Over Fout ,+/- 500Hz
Recommended operating condition
Recommended operating condition
Recommended operating condition
Recommended operating condition
MAVC-060103-132100
Rev: D
Units
MHz
dBm
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc
dBc
dBc
dBc
ms
mA
mA
V
V
Min
2055
-3.0
+4.75
3.1
Typ
-92
-119
-138
27
9
+5.0
3.3
Max
2265
+3.0
-80
-80
-90
-117
-136
-20
-70
-80
-80
30
30
10
+5.25
3.5
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See “Absolute Maximum Ratings” for Top.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liabil-
ity whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MAVC-060103-132100
Synthesizer , SMT
2055 — 2265 MHz, 1000 kHz
Electrical Specifications1: (cont’d)
MAVC-060103-132100
Parameter
Step Size (ΔF)
Reference Frequency (FR)
PLL Programming
PLL Lock Monitor Output
Test Conditions
Units
Min
Typ
Recommended operating limit
kHz
1000
1.0 V pp ± 0.2V square wave with input filter
MHz
6
10
3-wire serial CMOS IAW ADF4113, Charge Pump max current
Logic high = VCC2 x 0.8 Min and Logic low = VCC2 x 0.2 Max
Locked = VCC2 - 0.4 Min , Unlocked = 0.4V Max
Max
100
Pin Configuration
Pin No.
1
2
3
4
5
6
7
Function
VCC2
GND
REF I/P
GND
VCC1
GND
RF O/P
Pin No.
8
9
10
11
12
13
14
Function
GND
Lock Detect
Clock
Data
Load Enable
GND
GND
Functional Block Diagram
1
10nF
2
VCC2
GND
3
REF IN
4
GND
5
10nF
6
VCC1
GND
TO CONTROLLER
13
GND
LOAD ENABLE
12
11
DATA
CLOCK 10
LOCK DETECT 9
GND
8
GND
14
RF OUT
7
50R
1. The diagram above shows a typical application.
2. The Reference input and RF output are internally AC cou-
pled.
3. The diagram applies when digital lock detect is selected. For
analog open-drain mode, a filter is required.
Absolute Maximum Ratings
TA = +25°C
Parameter
Absolute Maximum
VCO Supply Voltage (VCC1)
PLL Supply Voltage (VCC2)
Reference Frequency Level
-0.3V to 6.5 V
-0.3V to 6.5 V
-0.3V to 6.5 V
Data, Clock, Strobe
Voltages
Operating Temperature
-0.3V to Vcc + 0.3 V
-40°C to +85°C
Storage Temperature
-45°C to +120°C
Solder Assembly
Temperature
Weight
Moisture Sensitivity Level 2
ESD Rating
See App Note M2032
3.0 grams
2
Class 1
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. As per JEDEC-STD-020.
Environmental Specifications
Devices are designed to function after exposure to the
shock, vibration, thermal shock and moisture conditions
typically encountered in base station and other infra-
structure environments.
Ordering Information
Part Number
MAVC-060103-132100
Package
Tape and Reel (300/Reel) 1
1. See application note M513.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liabil-
ity whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)