Pressure Sensor. MPXV7007G Datasheet

MPXV7007G Sensor. Datasheet pdf. Equivalent

Part MPXV7007G
Description Integrated Silicon Pressure Sensor
Feature Freescale Semiconductor Data Sheet: Technical Data Pressure MPXV7007 Rev 3, 10/2012 Integrated Sil.
Manufacture Freescale Semiconductor
Datasheet
Download MPXV7007G Datasheet




MPXV7007G
Freescale Semiconductor
Data Sheet: Technical Data
Pressure
MPXV7007
Rev 3, 10/2012
Integrated Silicon Pressure Sensor
On-Chip Signal Conditioned,
Temperature Compensated and
Calibrated
The MPXV7007 series piezoresistive transducers are state-of-the-art
monolithic silicon pressure sensors designed for a wide range of applications,
but particularly those employing a microcontroller or microprocessor with A/D
inputs. This transducer combines advanced micromachining techniques, thin-
film metallization, and bipolar processing to provide an accurate, high level
analog output signal that is proportional to the applied pressure.
Features
• 5.0% Maximum Error Over 0to 85C
• Ideally Suited for Microprocessor or Microcontroller-Based Systems
• Temperature Compensated Over –40to +125C
• Thermoplastic (PPS) Surface Mount Package
• Patented Silicon Shear Stress Strain Gauge
• Available in Differential and Gauge Configurations
MPXV7007
Series
-7 to 7 kPa (-1 to 1 psi)
0.5 to 4.5 V Output
Application Examples
• Hospital Beds
• HVAC
• Respiratory Systems
• Process Control
Device Name
Small Outline Package
MPXV7007DP
MPXV7007DPT1
MPXV7007GC6U
MPXV7007GC6T1
MPXV7007GP
Package
Options
Trays
Tape & Reel
Rails
Tape & Reel
Trays
Case
No.
ORDERING INFORMATION
# of Ports
Pressure Type
None Single Dual Gauge Differential Absolute
Device
Marking
1351
1351
482A
482A
1369
SMALL OUTLINE PACKAGE
MPXV7007DP
MPXV7007DP
MPXV7007G
MPXV7007G
MPXV7007GP
MPXV7007GC6U/C6T1
CASE 482A-01
MPXV7007GP
CASE 1369-01
MPXV7007DP/DPT1
CASE 1351-01
Table 1. Pin Numbers(1)
1234567
N/C Vs Gnd Vout N/C N/C N/C
1.Pins 1, 5, 6, 7 and 8 are internal device connections. Do not connect to external circuitry or ground. Pin 1 is noted by the notch in the lead.
8
N/C
© 2005, 2009, 2011, 2012 Freescale Semiconductor, Inc. All rights reserved.



MPXV7007G
Pressure
Operating Characteristics
Table 2. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted. Decoupling circuit shown in Figure 3 re-
quired to meet specification.)
Characteristic
Symbol Min Typ Max Unit
Pressure Range(1)
POP
-7
7 kPa
Supply Voltage(2)
VS 4.75 5.0 5.25 Vdc
Supply Current
Minimum Pressure Offset(3)
@ VS = 5.0 Volts
Full Scale Output(4)
@ VS = 5.0 Volts
Full Scale Span(5)
@ VS = 5.0 Volts
Accuracy(6)
(0 to 85C)
(0 to 85C)
(0 to 85C)
(0 to 85C)
Io — 7.0 10 mAdc
Voff 0.33 0.5 0.67 Vdc
VFSO
4.3
4.5
4.7
Vdc
VFSS
4.0
— Vdc
5.0
%VFSS
Sensitivity
V/P — 286 —- mV/kPa
Response Time(7)
tR — 1.0 —- ms
Output Source Current at Full Scale Output
Warm-Up Time(8)
IO+ — 0.1 —- mAdc
— — 20 —- ms
Offset Stability(9)
0.5
—- %VFSS
1. 1.0 kPa (kiloPascal) equals 0.145 psi.
2. Device is ratiometric within this specified excitation range.
3. Offset (Voff) is defined as the output voltage at the minimum rated pressure.
4. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.
5. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
minimum rated pressure.
6. Accuracy (error budget) consists of the following:
Linearity:
Output deviation from a straight line relationship with pressure over the specified pressure range.
Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to
and from the minimum or maximum operating temperature points, with zero differential pressure applied.
Pressure Hysteresis:
Output deviation at any pressure within the specified range, when this pressure is cycled to and from the
minimum or maximum rated pressure, at 25C.
TcSpan:
Output deviation over the temperature range of 0to 85C, relative to 25C.
TcOffset:
Output deviation with minimum rated pressure applied, over the temperature range of 0to 85C, relative to
25C.
Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25C.
7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to
a specified step change in pressure.
8. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
9. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
MPXV7007
2
Sensors
Freescale Semiconductor, Inc.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)