Differential Receiver. AD8123 Datasheet

AD8123 Receiver. Datasheet pdf. Equivalent


Analog Devices AD8123
Data Sheet
Triple Differential Receiver with
Adjustable Line Equalization
AD8123
FEATURES
Compensates cables to 300 meters for wideband video
Fast rise and fall times
4.9 ns with 2 V step at 150 meters of UTP cable
8.0 ns with 2 V step at 300 meters of UTP cable
55 dB peak gain at 100 MHz
Two frequency response gain adjustment pins
High frequency peaking adjustment (VPEAK)
Broadband flat gain adjustment (VGAIN)
Pole location adjustment pin (VPOLE)
Compensates for variations between cables
Can be optimized for either UTP or coaxial cable
DC output offset adjust (VOFFSET)
Low output offset voltage: 24 mV
Compensates both RGB and YPbPr
Two on-chip comparators with hysteresis
Can be used for common-mode sync extraction
Available in 40-lead, 6 mm × 6 mm LFCSP
APPLICATIONS
Keyboard-video-mouse (KVM)
Digital signage
RGB video over UTP cables
Professional video projection and distribution
HD video
Security video
GENERAL DESCRIPTION
The AD8123 is a triple, high speed, differential receiver and
equalizer that compensates for the transmission losses of UTP
and coaxial cables up to 300 meters in length. Various gain
stages are summed together to best approximate the inverse
frequency response of the cable. Logic circuitry inside the AD8123
controls the gain functions of the individual stages so that the
lowest noise can be achieved at short-to-medium cable lengths.
This technique optimizes its performance for low noise, short-
to-medium range applications, while at the same time provides
the high gain bandwidth required for long cable equalization
(up to 300 meters). Each channel features a high impedance
differential input that is ideal for interfacing directly with the cable.
The AD8123 has three control pins for optimal cable
compensation, as well as an output offset adjust pin. Two
voltage-controlled pins are used to compensate for different
cable lengths; the VPEAK pin controls the amount of high frequency
peaking and the VGAIN pin adjusts the broadband flat gain,
which compensates for the low frequency flat cable loss.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
FUNCTIONAL BLOCK DIAGRAM
VPEAK VPOLE VOFFSET VGAIN
AD8123
–INR
+INR
–ING
+ING
INB
+INB
–INCMP1
+INCMP1
–INCMP2
+INCMP2
Figure 1.
OUTR
OUTG
OUTB
OUTCMP1
OUTCMP2
For added flexibility, an optional pole adjustment pin, VPOLE,
allows movement of the pole locations, allowing for the
compensation of different gauges and types of cable as well
as variations between different cables and/or equalizers. The
VOFFSET pin allows the dc voltage at the output to be adjusted,
adding flexibility for dc-coupled systems.
The AD8123 is available in a 6 mm × 6 mm, 40-lead LFCSP
and is rated to operate over the extended temperature range of
−40°C to +85°C.
UXGA RESOLUTION IMAGE
AFTER 300 METER CAT-5 CABLE
BEFORE AD8123.
UXGA RESOLUTION IMAGE
AFTER 300 METER CAT-5 CABLE
AFTER AD8123.
Figure 2. UXGA Resolution Images Before and After the AD8123
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2007–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com


AD8123 Datasheet
Recommendation AD8123 Datasheet
Part AD8123
Description Triple Differential Receiver
Feature AD8123; Data Sheet Triple Differential Receiver with Adjustable Line Equalization AD8123 FEATURES Compensa.
Manufacture Analog Devices
Datasheet
Download AD8123 Datasheet




Analog Devices AD8123
AD8123* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
View a parametric search of comparable parts
Documentation
Data Sheet
• AD8123: Triple Differential Receiver with Adjustable Line
Equalization Data Sheet
Design Resources
• AD8123 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
Discussions
View all AD8123 EngineerZone Discussions
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.



Analog Devices AD8123
AD8123
TABLE OF CONTENTS
Features .............................................................................................. 1 
Applications....................................................................................... 1 
Functional Block Diagram .............................................................. 1 
General Description ......................................................................... 1 
Revision History ............................................................................... 2 
Specifications..................................................................................... 3 
Absolute Maximum Ratings............................................................ 5 
Thermal Resistance ...................................................................... 5 
ESD Caution.................................................................................. 5 
Pin Configuration and Function Descriptions............................. 6 
Typical Performance Characteristics ............................................. 7 
Theory of Operation ...................................................................... 10 
Input Common-Mode Voltage Range Considerations ......... 10 
Applications Information .............................................................. 11 
Basic Operation .......................................................................... 11 
REVISION HISTORY
1/16— Rev. A to Rev. B
Added Figure 2 Caption................................................................... 1
Changes to Figure 4 and Table 4..................................................... 6
Updated Outline Dimensions ....................................................... 16
Changes to Ordering Guide .......................................................... 16
11/07—Rev. 0 to Rev. A
Changes to Features.......................................................................... 1
Changes to Ordering Guide .......................................................... 16
8/07—Revision 0: Initial Version
Data Sheet
Comparators ............................................................................... 11 
Sync Pulse Extraction Using Comparators............................. 12 
Using the VPEAK, VPOLE, VGAIN, and VOFFSET Inputs ................... 12 
Using the AD8123 with Coaxial Cable.................................... 13 
Driving 75 Ω Video Cable With the AD8123 ........................ 13 
Driving a Capacitive Load......................................................... 13 
Filtering the RGB Outputs ........................................................ 13 
Power Supply Filtering............................................................... 14 
Layout and Power Supply Decoupling Considerations......... 14 
Input Common-Mode Range ................................................... 15 
Small Signal Frequency Response............................................ 15 
Power-Down ............................................................................... 15 
Outline Dimensions ....................................................................... 16 
Ordering Guide .......................................................................... 16 
Rev. B | Page 2 of 16







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)