Controllers Module. 6ES7-332-5HD01-0AB0 Datasheet
General Technical Specifications
S7-300www.DataSheet4U.com and M7-300
Power Supply Modules
Other Signal Modules
RS 485 Repeater
SIMATIC TOP connect and
SIMATIC TOP connect TPA
Parameter Sets for Signal
Diagnostics Data of the Signal
This manual is part of the following documentation packages
with the order numbers:
S7–300 Programmable Controller:
ET 200M Distributed I/O Device:
Spare Parts and Accessories for
Guidelines for Handling
Electrostatic Sensitive Devices
List of Abbreviations
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
! indicates that death, severe personal injury or substantial property damage will result if proper
precautions are not taken.
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
indicates that minor personal injury or property damage can result if proper precautions are not taken.
indicates that property damage can result if proper precautions are not taken.
draws your attention to particularly important information on the product, handling the product, or to a
particular part of the documentation.
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and
systems in accordance with established safety practices and standards.
Note the following:
! This device and its components may only be used for the applications described in the catalog or the
technical descriptions, and only in connection with devices or components from other manufacturers
which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed
correctly, and operated and maintained as recommended.
SIMATICR, SIMATIC HMIR and SIMATIC NETR are registered trademarks of SIEMENS AG.
Some of other designations used in these documents are also registered trademarks; the owner’s rights
may be violated if they are used by third parties for their own purposes.
Copyright W Siemens AG 1998-2001 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
Bereich Automatisierungs- und Antriebstechnik
Postfach 4848, D- 90327 Nuernberg
Disclaim of Liability
We have checked the contents of this manual for agreement
with the hardware and software described. Since deviations
cannot be precluded entirely, we cannot guarantee full
agreement. However, the data in this manual are reviewed
regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are
Siemens AG 1998-2001
Technical data subject to change.