Tuner IC. ADMTV102 Datasheet

ADMTV102 IC. Datasheet pdf. Equivalent

Part ADMTV102
Description RF Tuner IC
Feature RF tuner IC For DVB-H, T-DMB and FM ADMTV102 FEATURES Single chip synthesized tuner for multi-band m.
Manufacture Analog Devices
Datasheet
Download ADMTV102 Datasheet



ADMTV102
FEATURES
Single chip synthesized tuner for multi-band multi-mode
mobile-TV applications
Zero-IF single-conversion architecture which eliminates all
SAW filters
Covers whole band-III (174 ~ 245 MHz), FM (65 ~ 108 MHz),
www.DataSheeUt4HUF.c(o4m70 MHz ~ 862 MHz), L-band (1450 ~ 1492 MHz)
Operating dynamic range: -102 ~ 0 dBm
Ultra low power consumption
Band-III: 180 mW
UHF: 200 mW
L-Band: 210 mW
On-chip fast switching fractional-N PLL
On-chip low phase noise and wide frequency range VCO
On-chip bandwidth-adjustable low pass filter
Integrated baseband variable gain amplifier for direct
connection to digital demodulators
Noise/Linearity optimization through internal RF RSSI and
AGC loop
Adjustable take-over point
I2C serial bus interface
Small 32-QFN package (5 × 5 mm2)
Minimal external components
GENERAL DESCRIPTION
The ADMTV102 is a highly integrated CMOS single chip zero-
IF conversion tuner IC for mobile-TV standards, such as DVB-
H, T-DMB, DAB and FM. It includes triple RF input bands,
which are VHF/FM, UHF, and L-band. The building blocks of
ADMTV102 are LNAs, RF PGAs, I/Q down-conversion mixers,
bandwidth adjustable low pass filters, baseband variable gain
amplifiers, VCOs and a fractional-N PLL, etc. On-chip low
phase noise VCO along with high resolution fractional-N
frequency synthesizer make in-band phase noise lower than
that of any other conventional tuners.
RF tuner IC
For DVB-H, T-DMB and FM
ADMTV102
FUNCTIONAL BLOCK DIAGRAM
Figure 1. Block Diagram
APPLICATIONS
Mobile / portable application for multi-standard
UHF DVB-H mobile phone, PDA
Dual-band T-DMB mobile phone, PDA
FM radio application
The ADMTV102 supports multi-band multi-standards with
ultra low power consumption such as 200 mW for DVB-H.
Using small leadless 5 mm × 5 mm 32-LD QFN package, the
ADMTV102 is the best solution for highly integrated multi-
band, multi-standard system and portable application where
low power consumption is critical. It has an industry standard
I2C serial bus interface. Applications of the ADMTV102 are
UHF DVB-H, dual-band T-DMB and FM.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)