profile SMD. ACT9200SSC Datasheet

ACT9200SSC SMD. Datasheet pdf. Equivalent

Part ACT9200SSC
Description low profile SMD
Feature Tel : Fax : email : +44 118 979 1238 +44 118 979 1283 info@actcrystals.com ACT9200SSC The ACT9200S.
Manufacture Advanced Crystal Technology
Datasheet
Download ACT9200SSC Datasheet




ACT9200SSC
ACT9200SSC
Tel :
Fax :
email :
+44 118 979 1238
+44 118 979 1283
info@actcrystals.com
The ACT9200SSC is housed in a miniature, low profile SMD package, with a ceramic base
utilising a seam welded metal lid for high reliability and better long-term stability. Spread
Spectrum Technology is employed to assist with EMI emission reductions. A Low Jitter version
is available as the 9200SSCL . Taped and reeled packaging (1K reels) and loose quantities are
available, to suit high and low volume production. Other Spread Spectrum devices are available
in 5x3.2 (ACT9300SSC), DIL14 and 9.6x11.4x2.5. A 0.5% total percentage device is available to
special order (MOQ 2K).
SPECIFICATION
www.DataSheet4U.com
Parameter
Symbol
Specification
Condition
Supply Voltage
Frequency Range
Frequency Stability
Temp Operating Range
Temp Storage Range
VDD
fo
Δf/fo
Topr
Tstg
Operating Current
Iop
Spread Percentage Down spread
or Centre spread need to be
Specified when ordering.**
Tolerance ±2% of Total%
EMI Reduction
Modulation Carrier Frequency
Duty Cycle
Output Level ‘0’
Output Level ‘1’
Output Impedance
Rise & Fall Time (max)
Output Load
Start-up Time
Tri-state#
Static discharge Voltage
Ageing
Cycle to Cycle Jitter
Tw/t
VOL
VOH
TrTf
N/CL
Tosc
Fa
Tj
Total %
0.5#
1.0
3.0
3.3VDC ± 5%
3.500 ~160.0 MHz
±25ppm, ±50ppm or ±100ppm
0 ~ +70°C or -40 ~ +85°C
-65 to +150°C
7mA (10MHz) 8mA (32.768MHz)
17mA (75MHz) 18mA (125MHz)
Down Spread %
-0.5#
1
-3%
Centre Spread % ©
±0.25#
±0.5
±1.5
-7dBc 100MHz at C=0.25#
-9dBc min 100MHz at C=0.5
-15dBc min 100MHz at C=1.5
6.9KHz min, 55.5KHz max
45/55%
0.8V max 0.2 V typical (at 10% VDD)
2.0V min 3.2V typical (at 90% VDD)
40 ohms typical
4.0nS max (10%VDD to 90%VDD)
15pF CMOS
5mS max, 2mS Typical
Tri state: output when low. Disable time 100nS max
>2000V
±5ppm
±250pS typical, ±300pS max
Please specify
Please specify
Please specify
Freq Dependant
Please specify
# Tri State not available.
dBc: with respect to EMI
level with no modulation.
See examples
Dependant on frequency
CL=15pF: @50%VDD
100K int'l pull up resistor
MIL STD 883 Method 3015
first year max @25°C
for 13 MHz Oscillator
Notes:
**For initial design samples centre spread 1.5% is recommended.
# Tri state not available on 0.5% total spread versions.
Please note that all parameters can not necessarily be specified in the same device
Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Centre or down Spread, Spread Percentage
In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue:5 M6
Date:01/02/06
1 of 6



ACT9200SSC
ACT9200SSC
www.DataSheet4U.com
Tel :
Fax :
email :
+44 118 979 1238
+44 118 979 1283
info@actcrystals.com
Spread Spectrum principle:
Down Spread
Centre Spread
In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue:5 M6
2 of 6
Date:01/02/06







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)