CY7C9925 Datasheet: 3.3V/2.5V Programmable Skew Clock Buffer





CY7C9925 3.3V/2.5V Programmable Skew Clock Buffer Datasheet

Part Number CY7C9925
Description 3.3V/2.5V Programmable Skew Clock Buffer
Manufacture Cypress Semiconductor
Total Page 12 Pages
PDF Download Download CY7C9925 Datasheet PDF

Features: PRELIMINARY CY7C9925 3.3V/2.5V Program mable Skew Clock Buffer Features • Al l output pair skew <100 ps (typical) Input Frequency Range: 3.75 MHz to 20 0 MHz • Output Frequency Range: 3.75 MHz to 200 MHz • User-selectable outp ut functions — Selectable skew to 18 ns — Inverted and non-inverted — Op eration at 1⁄2 and 1⁄4 input freque ncy — Operation at 2x and 4x input fr equency (input as low as 3.75 MHz) Fun ctional Description The CY7C9925 RoboCl ock is 200-MHz Low-voltage Programmable Skew Clock Buffer that offers user-sel ectable control over system clock funct ions. This multiple-output clock driver provides the system integrator with fu nctions necessary to optimize the timin g of high-performance computer systems. Eight individual drivers, arranged as four pairs of user-controllable outputs , can each drive terminated transmissio n lines with impedances as low as 50Ω while delivering minimal and specified output skews and full-swing logic levels (LVTTL). Each output can be hardwired to on.

Keywords: CY7C9925, datasheet, pdf, Cypress Semiconductor, 3.3V/2.5V, Programmable, Skew, Clock, Buffer, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

PRELIMINARY
CY7C9925
3.3V/2.5V Programmable Skew Clock Buffer
Features
• All output pair skew <100 ps (typical)
• Input Frequency Range: 3.75 MHz to 200 MHz
• Output Frequency Range: 3.75 MHz to 200 MHz
• User-selectable output functions
— Selectable skew to 18 ns
— Inverted and non-inverted
— Operation at 12 and 14 input frequency
— Operation at 2x and 4x input frequency (input as low
as 3.75 MHz)
www.DataSheZerto4Uin.pcuotm-to-output delay
• 3.3V Core power supply
• Split 2.5V or 3.3V Output power supplies
• ± 2.5% Output Duty Cycle Distortion for 3.3V Output
LVTTL outputs drive 50terminated lines
• Low operating current
• 32-pin QFN package
• Jitter < 100ps peak-to-peak (< 15 ps RMS)
Block Diagram
TEST
FB
REF
PHASE
FREQ FILTER
DET
FS
VCO AND
TIME UNIT
GENERATOR
4F0
4F1 SELECT
INPUTS
(THREE
3F0 LEVEL)
3F1
2F0
2F1
SKEW
SELECT
MATRIX
1F0
1F1
4Q0
4Q1
3Q0
3Q1
2Q0
2Q1
1Q0
1Q1
Functional Description
The CY7C9925 RoboClock is 200-MHz Low-voltage Program-
mable Skew Clock Buffer that offers user-selectable control
over system clock functions. This multiple-output clock driver
provides the system integrator with functions necessary to
optimize the timing of high-performance computer systems.
Eight individual drivers, arranged as four pairs of user-control-
lable outputs, can each drive terminated transmission lines
with impedances as low as 50while delivering minimal and
specified output skews and full-swing logic levels (LVTTL).
Each output can be hardwired to one of nine delay or function
configurations. Delay increments of 0.32 to 1.6 ns are deter-
mined by the operating frequency with outputs able to skew up
to ±6 time units from their nominal “zero” skew position. The
completely integrated PLL allows external load and trans-
mission line delay effects to be canceled. When this “zero
delay” capability of the LVPSCB is combined with the
selectable output skew functions, the user can create
output-to-output delays of up to ±12 time units.
Divide-by-two and divide-by-four output functions are provided
for additional flexibility in designing complex clock systems.
When combined with the internal PLL, these divide functions
allow distribution of a low-frequency clock that can be multi-
plied by two or four at the clock destination. This facility
minimizes clock distribution difficulty while allowing maximum
system clock speed and flexibility.
Pin Configuration
3F1
4F0
4F1
VCCQ
VCCN4
4Q1
4Q0
GND
32 31 30 29 28 27 26 25
1 24
2 23
3 22
4 21
5 CY7C9925
6
20
19
7 18
8 17
9 10 11 12 13 14 15 16
GND
1F1
1F0
VCCN1
1Q0
1Q1
GND
GND
Cypress Semiconductor Corporation • 3901 North First Street • San Jose, CA 95134 • 408-943-2600
Document #: 38-07688 Rev. **
Revised June 25, 2004

                    
              






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)