DatasheetsPDF.com

LCD Module. B150PG01 Datasheet

DatasheetsPDF.com

LCD Module. B150PG01 Datasheet






B150PG01 Module. Datasheet pdf. Equivalent




B150PG01 Module. Datasheet pdf. Equivalent





Part

B150PG01

Description

TFT LCD Module

Manufacture

AU

Datasheet
Download B150PG01 Datasheet


AU B150PG01

B150PG01; www.DataSheet4U.com Product Functional Specification 15 inch SXGA+ Color TFT L CD Module Model Name : B150PG01 ( ( ) Preliminary Specification u ) Final Sp ecification Note: This Specification i s subject to change without notice. (C ) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. B150PG01 Ver. 04 1/1 No Reproduction and Redistribu tion Allowed. I. .


AU B150PG01

Contents 1.0 2.0 Handling Precautions Ge neral Description 2.1 Characteristics 2 .2 Functional Block Diagram 3.0 4.0 5.0 www.DataSheet4U.com Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Elec trical Characteristics 5.5 Signal for L amp Connector 6.0 7.0 8.0 Pixel Forma t Image Parameter .


AU B150PG01

Guide Line for CFL Inverter Interface Ti mings 8.1 Timing Characteristics 8.2 Ti ming Definition 9.0 10.0 11.0 Power C onsumption Power ON/OFF Sequence Mechan ical Characteristics II Record of Revi sion Version and Date Page 0.1. 2001/8/ 13 0.2 2001/12/12 0.3 2002/3/5 0.3 2002 /3/5 0.4 2002/4/23 All 5 8 9 5,8 Old de scription First Edition for Customer (T r, Tf)= (35,15) Ne.



Part

B150PG01

Description

TFT LCD Module

Manufacture

AU

Datasheet
Download B150PG01 Datasheet




 B150PG01
www.DataSheet4U.com
Product Functional Specification
15 inch SXGA+ Color TFT LCD Module
Model Name : B150PG01
( ) Preliminary Specification
( u) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PG01 Ver. 04
1/1





 B150PG01
I. Contents
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Signal Interface
www.DataSheet4U.com
5.1 Connectors
5.2 Signal Pin
5.3 Signal Description
5.4 Signal Electrical Characteristics
5.5 Signal for Lamp Connector
6.0 Pixel Format Image
7.0 Parameter Guide Line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
II Record of Revision
Version and Date Page Old description
0.1. 2001/8/13
All First Edition for Customer
0.2 2001/12/12
5 (Tr, Tf)= (35,15)
0.3 2002/3/5
0.3 2002/3/5
0.4 2002/4/23
8
9
5,8
New Description
All
(Tr, Tf)= (15,35)
Update CIE
Update pin assignment
Add luminance uniformity
Remark
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PG01 Ver. 04
2/2





 B150PG01
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
www.DataSheet4U.com
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge.
Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT
Module may be damaged.
10)At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12)Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source(2.11, IEC60950 or UL1950), or be applied exemption.
14)The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit(2.4,
IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PG01 Ver. 04
3/3



Recommended third-party B150PG01 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)