219-2LPSTR DIP Datasheet

219-2LPSTR Datasheet, PDF, Equivalent


Part Number

219-2LPSTR

Description

SMT DIP

Manufacture

CTS

Total Page 2 Pages
Datasheet
Download 219-2LPSTR Datasheet


219-2LPSTR
www.DataSheet4U.com ®
Surface Mount
DIP Switch —
Auto Placeable
Features
Optimized Mechanical Features
• Removable tape seal to withstand IR vapor phase
or wave soldering temperatures,and board washing
• Positive detent separate from contactor
• Available low profile, medium, and extended height
actuators
• Gull-wing and "J" lead terminal configurations
• Tube or tape and reel packaging available
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
Premium Materials
• Gold plated beryllium copper contacts
• All plastic rated UL 94 V-0
• High temperature body and actuator materials
• RoHS compliant
Series 219 SMT DIP
Electrical and Mechanical Specifications
Switch Function
SPST- 2 through 10 and 12 positions
Coplanarity
0.10mm (.004") maximum
Switch Contact Resistance
25 milliohms maximum initial
50 milliohms maximum at the end of life
Insulation Resistance
1,000 megohms minimum between
insulated terminals
Dielectric Strength
500 VDC for 1 minute between
adjacent switches
Nonswitching Rating
100 mA or 50 VDC maximum
Switch Capacitance
5 pF maximum between adjacent closed switches
Operating Temperature
- 55°C to +85°C
Actuation Life
2,000 cycles switching 100 mA @ 20 VDC or
0.1 mA @ 5 VDC (dry circuit)
Allowable Solder Time
Up to 60 seconds at 260°C
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G’s between 10 HZ to 2K HZ) with no
contact inconsistencies greater than 1
microsecond.
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies greater
than 1 microsecond.
Sealing
Standard bottom seal
Optional top tape seal
Marking
Special marking available consult CTS.
Packaging
Standard : Anti-static tube packaging
Optional : Tape and reel packaging
1-2
CTS Electronic Components
© 2008 CTS Corporation. All rights reserved. Information subject to change.
2/12/08
www.ctscorp.com

219-2LPSTR
CTS SERIES 219 SMT CONTACT FEATURES
w1w. wV.aDluaetaoSfhReeedt4uUnd.caonmt (Bifurcated) Gold Plated Contacts: Redundancy
dramatically reduces the probability of contact failure while gold contact material
provides the highest environmental protection, IMPROVING RELIABILITY.
2. Value of Wiping Contact Action: Clean contact area, IMPROVING RELIABILITY.
3. Value of Contactor Not Deflecting During Actuation: Constant contact pressure
eliminates overstressing contacts, IMPROVING RELIABILITY.
4. Value of Detent Separate from Contactor: Separate detent allows optimization
of nondeflecting contactor and detent designs, IMPROVING RELIABILITY.
2. Wiping contact action
1. Redundant
(bifurcated) gold
plated cross radial
contactor
3. Contactor does not
deflect during actuation
4. Detent separate
from contactor
"A"
Overall
Dimension
6.55/.258
9.09/.358
11.63/.458
14.17/.558
16.71/.658
19.25/.758
21.79/.858
24.33/.958
26.87/1.058
31.95/1.258
No. of
Switch
positions
2
3
4
5
6
7
8
9
10
12
Gull Wing Terminals
Medium Height Actuator
"J" Bend Terminals
Low Profile Actuator
TRAVEL 0.70
.028
6.70±0.25 3.62
.264±.010 .143
ON CTS
1 2 3 4 5 10 11 12
1.0
.039
X45° CHAMFER (2)
DATE CODE
2.54
.100
TYP.
1.50
.059
TYP.
0.55±0.08
.022±.003 TYP.
"A" ±0.30
±.012
0.55
.022
SOLDER COATED
+0.13
0.25 -0.00
3.80 -+00..1005
.010 -+..000005
.150 +-..000042
STANDOFF
0.25±0.10
.010±.004
8.00
.315
7.62±0.20
.300±.008
9.91±0.08
.390±.003
Gull Wing Surface Mount Pad Layouts
2.44
.096
8.60 6.17 11.04
.339 .243 .435
TRAVEL 0.70
.028
6.70±0.25
.264±.010
3.62
.143
ON CTS
1 2 3 4 5 10 11 12
2.54
.100
TYP.
1.50
.059
TYP.
1.0
.039
X45° CHAMFER (2)
DATE CODE
"A"
±0.30
±.012
8.00
.315
1.50
.059
0.55±0.08
.022±.003
TYP.
3.80
+0.05
-0.10
.150 +-..000042
STANDOFF
1.27±0.10
.050±.004
8.51
.335
MAX
"J" Bend Surface Mount Pad Layouts
1.3
.050
6.73
.265
4.57
.180
8.89
.350
2.54
.100 TYP.
1.13
.044 TYP.
DIMENSION:
mm
inch
2.54
.100 TYP.
1.13
.044
TYP.
Ordering Information
219 – 12 LP S T J R F
XX: NO. OF POSITIONS
E: EXTENDED HEIGHT ACTUATOR(0.60mm/.024")
M: MEDIUM HEIGHT ACTUATOR(0.25mm/.010")
LP: LOW PROFILE ACTUATOR(Flush)
BLANK: SHIP AT ON POSITION
F: SHIP AT OFF POSITION
BLANK : ANTI-STATIC TUBE PACKAGING
R: TAPE AND REEL PACKAGING
BLANK: GULL-WING TERMINAL
J: "J" BEND TERMINAL
BLANK: NO TOP TAPE SEAL
* T : TOP TAPE SEAL
* Not available on extended actuator
S: BOTTOM SEAL
2-2
© 2008 CTS Corporation. All rights reserved. Information subject to change.
CTS Electronic Components
2/12/08
www.ctscorp.com


Features Series 219 SMT DIP www.DataSheet4U.com Surface Mount DIP Switch — Auto Pl aceable Features Optimized Mechanical F eatures • Removable tape seal to with stand IR vapor phase or wave soldering temperatures,and board washing • Posi tive detent separate from contactor • Available low profile, medium, and ext ended height actuators • Gull-wing an d "J" lead terminal configurations • Tube or tape and reel packaging availab le Optimized Contact System • Redunda nt, wiping contact • Contactor does n ot deflect during actuation Premium Mat erials • Gold plated beryllium copper contacts • All plastic rated UL 94 V -0 • High temperature body and actuat or materials • RoHS compliant Electr ical and Mechanical Specifications Swit ch Function SPST- 2 through 10 and 12 p ositions Switch Contact Resistance 25 m illiohms maximum initial 50 milliohms m aximum at the end of life Insulation Re sistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VDC for 1 minute between adjacent switches N.
Keywords 219-2LPSTR, datasheet, pdf, CTS, SMT, DIP, 19-2LPSTR, 9-2LPSTR, -2LPSTR, 219-2LPST, 219-2LPS, 219-2LP, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)