Power Supplies. SDS150 Datasheet

SDS150 Supplies. Datasheet pdf. Equivalent

Part SDS150
Description AC-DC Power Supplies
Feature AC-DC 150 Watts www.DataSheet4U.com xppower.com SDS150 Series • • • • • • • 3” x 5” Footprint Fit.
Manufacture XP Power Limited
Datasheet
Download SDS150 Datasheet



SDS150
150 Watts
SDS150www.DataSheet4U.com Series
xppower.com
3” x 5” Footprint
Fits 1U Applications
Convection-cooled
Open Frame & U-Channel Versions
Optional Power Fail Detect Signal
Optional Low Temperature Operation
Up to 90% Efficiency
Specification
Input
Input Voltage
Input Frequency
Input Current
Inrush Current
Power Factor
Earth Leakage Current
Input Protection
• 90-264 VAC (120-370 VDC)
• 47-63 Hz
• 2.0 A at 115 VAC
1.0 A at 230 VAC
• 20 A at 115 VAC
63 A at 230 VAC
• >0.95
• <0.40 mA at 115 VAC
<0.75 mA at 230 VAC
• 3.15 A on board fuse
Output
Output Voltage
• See table
Output Voltage Trim • ±5%
Initial Set Accuracy • ±1%
Minimum Load
• No minimum load required
Start Up Delay
• 2 s max
Start Up Rise Time
• 2 ms typical
Hold Up Time
• >16 ms
Line Regulation
• 1% max, ±0.5% typical
Load Regulation
• 5% max, ±3.0% typical
Transient Response
• 4% max deviation, recovery to within 1%
in 500 µs for a 50% load change
Ripple & Noise
• 1% pk-pk max
Overvoltage Protection • 112-132%, recycle input to reset
Overload Protection • 110-150% with auto recovery
Short Circuit Protection • Trip & restart (Hiccup mode),
auto recovery
Temperature
Coefficient
• 0.04%/°C
General
Efficiency
Isolation
Switching Frequency
Power Density
Signals
MTBF
• 88% typical, 90% max
• 3000 VAC Input to Output
1500 VAC Input to Ground
500 VDC Output to Ground
• PWM 60 kHz typical, PFC 100 kHz typical
• 6.9 W/In3 for open frame version
• Power Fail Detect = TTL low (option)
• >100 kHrs per MIL-HDBK-217F
Environmental
Operating Temperature • 0 °C to +70 °C, derate linearly from 100%
load at +50 °C to 50% load at +70 °C,
low temperature option ‘-L’ -40 °C
Cooling
• Convection-cooled
Operating Humidity • 5-95% RH, non-condensing
Storage Temperature • -40 °C to +85 °C
Vibration
• 2 g on 3 axes
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Dips & Interruptions
Safety Approvals
• EN55022, FCC Part 15, level B conducted
• EN61000-3-2
• EN61000-3-3
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria A
• EN61000-4-5, level 3 Perf Criteria A
• EN61000-4-6, level 2 Perf Criteria A
• EN61000-4-11, 70% UT for 10 ms,
40% UT for 100 ms, <5% UT for 5000 ms
Perf Criteria A, B, B
• EN60950-1, UL60950-1, CSA60950-1
per cUL, CE Mark LVD



SDS150
Models and Ratings
www.DataSheet4U.com
Maximum
Output
Output Power
Voltage
144 W
9V
150 W
12 V
150 W
15 V
150 W
18 V
150 W
24 V
150 W
30 V
150 W
36 V
150 W
48 V
Output Current
Minimum
Maximum
0 A 16.00 A
0 A 12.50 A
0 A 10.00 A
0 A 8.33 A
0 A 6.25 A
0 A 5.00 A
0 A 4.17 A
0 A 3.13 A
Notes
1. Total regulation includes initial set accuracy, line regulation and load regulation.
2. For optional 2 pin Molex input, add suffix ‘-D’ to model number. Example SDS150PS12-D.
3. For non-standard voltages contact sales office.
4. For optional Power Fail Detect signal (PFD), add suffix ‘-P’ to model number . Example: SDS150PS48B-P.
5. For optional PCB only version, delete suffix ‘B’ from model number. Example SDS150PS48.
6. For optional low temperature operation, add suffix ‘-L’ to model number. Example: SDS150PS12-L
Total
Regulation(1)
5%
5%
5%
4%
3%
2%
2%
2%
Available from Farnell. See pages 204-206.
^ Available from Newark. See pages 207-208.
SDS150
Model Number(2,4,5,6)
SDS150PS09B†^
SDS150PS12B†^
SDS150PS15B†^
SDS150PS18B†^
SDS150PS24B†^
SDS150PS30B
SDS150PS36B
SDS150PS48B†^
Mechanical Details
Open Frame
All dimensions are in inches (mm)
Tolerance: ±0.02 (±0.5)
Weight: 1.23 lbs (560 g) approx.
M3 x P0.5 (Mounting Holes) x 4
1.57 (40.0)
ø4.0 (Mounting Holes) x 4
5.00 (127.0)
4.55 (115.6)
0.80 (20.3)
0.22 (5.7)
AC
Input L
N
G
P1
1.21 (30.7)
P2
1
DC
Output
Pitch = 3.96 mm
13
PFD
0.80 (20.3)
1.40 (35.6)
0.12 (3.0)
U Channel
1.18 (30.0)
0.54 (13.6)
AC Input
GN L
P1
M3* P0.5 (Mounting Holes) x 5 1.18 (30.0)
P2 - PIN CONNECTIONS
Pin Function Pin Function
1 V1 7 Return
2 V1 8 Return
3 V1 9 Return
4 V1 10 Return
5 V1 11 Return
6 V1 12 Return
13 PFD(2)
Notes:
1. Dimensions in inches (mm), tolerance ±0.02 (±0.5).
2. Optional Power Fail Detect signal on ‘P’ versions only. Standard
models have no connection for pin 13.
3. Input connector P1 mates with Molex housing 09-50-3051 and
Molex 2478 series crimp terminal.
4. Output connector P2 mates with Molex housing 09-50-3131 and
Molex 2478 series crimp terminal.
5. For mating connector kit order part number SDS120 CON KIT.
6. For cable harness order part number SDS120S LOOM.
7. DIN clips are available for alternate mounting order 2 x ‘DIN CLIP’.
8. For optional cover kit order part number SDS150 COVER.
To receive unit with cover fitted add suffix ‘-C’ to model number.
Height increases by 0.18 (4.5).
Power Fail Detect
2.57 (65.3)
M3* P0.5 (Mounting Holes) x 4
ADJ
13
PFD
Pitch = 3.96 mm
1 P2
DC Output
0.67 (16.9)
3.21 (81.5)
+5 V
Internal
PFD is +5 V for normal operation.
Source current is 5 mA max.
Pin 13 PFD is <0.4 V for either
AC Fail (<90 VAC) or
DC Fail (<95% Vnom).
Sink current is 10 mA max.
22-Jun-07





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)