Temperature Sensor. ADT7310 Datasheet

ADT7310 Sensor. Datasheet pdf. Equivalent

Part ADT7310
Description 16-Bit Digital SPI Temperature Sensor
Feature www.DataSheet4U.com ±0.5°C Accurate, 16-Bit Digital SPI Temperature Sensor ADT7310 GENERAL DESCRIPT.
Manufacture Analog Devices
Datasheet
Download ADT7310 Datasheet




ADT7310
www.DataSheet4U.com
±0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor
ADT7310
FEATURES
13- or 16-bit user selectable temperature-to-digital converter
Temperature accuracy ±0.5°C from −40°C to +105°C
No temperature calibration/correction required by user
Power saving 1 sample per second (SPS) mode
Fast first conversion on power-up of 6 ms
SPI-compatible interface
Operating temperature from −55°C to +150°C
Operating voltage: 2.7 V to 5.5 V
Critical overtemperature indicator
Programmable overtemperature/undertemperature interrupt
Low power consumption: 700 μW typical at 3.3 V
Shutdown mode for lower power: 7μW typical at 3.3 V
8-lead narrow SOIC RoHS-compliant package
APPLICATIONS
Medical equipment
Environmental control systems
Computer thermal monitoring
Thermal protection
Industrial process control
Power system monitors
Hand-held applications
GENERAL DESCRIPTION
The ADT7310 is a high accuracy digital temperature sensor
in a narrow SOIC package. It contains a band gap temperature
reference and a 13-bit ADC to monitor and digitize the
temperature to a 0.0625°C resolution. The ADC resolution,
by default, is set to 13 bits (0.0625 °C). This can be changed
to 16 bits (0.0078 °C) by setting Bit 7 in the configuration
register (Register Address 0x01).
The ADT7310 is guaranteed to operate over supply voltages from
2.7 V to 5.5 V. Operating at 3.3 V, the average supply current is
typically 210 μA. The ADT7310 has a shutdown mode that
powers down the device and offers a shutdown current of
typically 2 μA. The ADT7310 is rated for operation over the
−55°C to +150°C temperature range.
The CT pin is an open-drain output that becomes active when
the temperature exceeds a programmable critical temperature
limit. The default critical temperature limit is 147°C. The INT
pin is also an open-drain output that becomes active when the
temperature exceeds a programmable limit. The INT and CT
pins can operate in either comparator or interrupt mode.
SCLK 1
DOUT 2
DIN 3
CS 4
TEMPERATURE
VALUE
REGISTER
THYST
REGISTER
THIGH
REGISTER
FUNCTIONAL BLOCK DIAGRAM
INTERNAL
REFERENCE
INTERNAL
OSCILLATOR
CONFIGURATION
AND STATUS
REGISTERS
TEMPERATURE
SENSOR
TCRIT
REGISTER
TLOW
REGISTER
Σ-Δ
MODULATOR
FILTER
LOGIC
Figure 1.
ADT7310
TCRIT
THIGH
6 CT
5 INT
TLOW
7 GND
8 VDD
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.



ADT7310
ADT7310
www.DataSheet4U.com
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
SPI Timing Specifications ........................................................... 4
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
Typical Performance Characteristics ............................................. 7
Theory of Operation ........................................................................ 9
Circuit Information...................................................................... 9
Converter Details.......................................................................... 9
Temperature Measurement ......................................................... 9
One-Shot Mode .......................................................................... 10
1 SPS Mode.................................................................................. 10
Continuous Read Mode............................................................. 12
Shutdown..................................................................................... 12
Fault Queue ................................................................................. 12
Temperature Data Format ......................................................... 13
Temperature Conversion Formulas ......................................... 13
Registers ........................................................................................... 14
REVISION HISTORY
4/09—Revision 0: Initial Version
Status Register............................................................................. 14
Configuration Register .............................................................. 15
Temperature Value Register ...................................................... 16
ID Register................................................................................... 16
TCRIT Setpoint Register ............................................................... 16
THYST Setpoint Register............................................................... 17
THIGH Setpoint Register .............................................................. 17
TLOW Setpoint Register ............................................................... 17
Serial Interface ................................................................................ 18
SPI Command Byte.................................................................... 18
Writing Data ............................................................................... 19
Reading Data............................................................................... 20
Interfacing to DSPs or Microcontrollers ................................. 20
Serial Interface Reset.................................................................. 20
INT and CT Outputs...................................................................... 21
Undertemperature and Overtemperature Detection ............ 21
Applications Information .............................................................. 23
Thermal Response Time ........................................................... 23
Supply Decoupling ..................................................................... 23
Temperature Monitoring........................................................... 23
Outline Dimensions ....................................................................... 24
Ordering Guide .......................................................................... 24
Rev. 0 | Page 2 of 24







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)