DatasheetsPDF.com

8-bit microcontroller. P89LPC952 Datasheet

DatasheetsPDF.com

8-bit microcontroller. P89LPC952 Datasheet






P89LPC952 microcontroller. Datasheet pdf. Equivalent




P89LPC952 microcontroller. Datasheet pdf. Equivalent





Part

P89LPC952

Description

(P89LPC952 / P89LPC954) 8-bit microcontroller



Feature


P89LPC952/954 8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/ 16 kB 3 V byte-erasable flash with 10- bit ADC Rev. 04 — 24 July 2008 Produc t data sheet 1. General description Th e P89LPC952/954 is a single-chip microc ontroller, available in low cost packag es, based on a high performance process or architecture that executes instructi ons in two to four clo.
Manufacture

NXP Semiconductors

Datasheet
Download P89LPC952 Datasheet


NXP Semiconductors P89LPC952

P89LPC952; cks, six times the rate of standard 80C5 1 devices. Many system-level functions have been incorporated into the P89LPC9 52/954 in order to reduce component cou nt, board space, and system cost. 2. F eatures 2.1 Principal features I 8 kB/1 6 kB byte-erasable flash code memory o rganized into 1 kB sectors and 64-byte pages. Single-byte erasing allows any b yte(s) to be used as.


NXP Semiconductors P89LPC952

non-volatile data storage. I 256-byte R AM data memory and a 256-byte auxiliary on-chip RAM. I 8-input multiplexed 10- bit ADC with window comparator that can generate an interrupt for in or out of range results. Two analog comparators with selectable inputs and reference so urce. I Two 16-bit counter/timers (each may be configured to toggle a port ou tput upon timer over.


NXP Semiconductors P89LPC952

flow or to become a PWM output) and a 2 3-bit system timer that can also be use d as a RTC. I Two enhanced UARTs with a fractional baud rate generator, break detect, framing error detection, and au tomatic address detection; 400 kHz byte -wide I2C-bus communication port and SP I communication port. I High-accuracy i nternal RC oscillator option, with cloc k doubler option, al.

Part

P89LPC952

Description

(P89LPC952 / P89LPC954) 8-bit microcontroller



Feature


P89LPC952/954 8-bit microcontroller with accelerated two-clock 80C51 core 8 kB/ 16 kB 3 V byte-erasable flash with 10- bit ADC Rev. 04 — 24 July 2008 Produc t data sheet 1. General description Th e P89LPC952/954 is a single-chip microc ontroller, available in low cost packag es, based on a high performance process or architecture that executes instructi ons in two to four clo.
Manufacture

NXP Semiconductors

Datasheet
Download P89LPC952 Datasheet




 P89LPC952
P89LPC952/954
8-bit microcontroller with accelerated two-clock 80C51 core
8 kB/16 kB 3 V byte-erasable flash with 10-bit ADC
Rev. 04 — 24 July 2008
Product data sheet
1. General description
The P89LPC952/954 is a single-chip microcontroller, available in low cost packages,
based on a high performance processor architecture that executes instructions in two to
four clocks, six times the rate of standard 80C51 devices. Many system-level functions
have been incorporated into the P89LPC952/954 in order to reduce component count,
board space, and system cost.
2. Features
2.1 Principal features
I 8 kB/16 kB byte-erasable flash code memory organized into 1 kB sectors and 64-byte
pages. Single-byte erasing allows any byte(s) to be used as non-volatile data storage.
I 256-byte RAM data memory and a 256-byte auxiliary on-chip RAM.
I 8-input multiplexed 10-bit ADC with window comparator that can generate an interrupt
for in or out of range results. Two analog comparators with selectable inputs and
reference source.
I Two 16-bit counter/timers (each may be configured to toggle a port output upon timer
overflow or to become a PWM output) and a 23-bit system timer that can also be used
as a RTC.
I Two enhanced UARTs with a fractional baud rate generator, break detect, framing
error detection, and automatic address detection; 400 kHz byte-wide I2C-bus
communication port and SPI communication port.
I High-accuracy internal RC oscillator option, with clock doubler option, allows operation
without external oscillator components. The RC oscillator option is selectable and fine
tunable. Fast switching between the internal RC oscillator and any oscillator source
provides optimal support of minimal power active mode with fast switching to
maximum performance.
I 2.4 V to 3.6 V VDD operating range. I/O pins are 5 V tolerant (may be pulled up or
driven to 5.5 V).
I 44-pin and 48-pin packages with 40 and 42 I/O pins minimum while using on-chip
oscillator and reset options.
I Port 5 has high current sourcing/sinking (20 mA) for all Port 5 pins. All other port pins
have high sinking capability (20 mA). A maximum limit is specified for the entire chip.
I Watchdog timer with separate on-chip oscillator, requiring no external components.
The watchdog prescaler is selectable from eight values.
www.DataSheet4U.com




 P89LPC952
NXP Semiconductors
P89LPC952/954
8-bit microcontroller with 10-bit ADC
2.2 Additional features
I A high performance 80C51 CPU provides instruction cycle times of 111 ns to 222 ns
for all instructions except multiply and divide when executing at 18 MHz. This is six
times the performance of the standard 80C51 running at the same clock frequency. A
lower clock frequency for the same performance results in power savings and reduced
EMI.
I Serial flash In-Circuit Programming (ICP) allows simple production coding with
commercial EPROM programmers. Flash security bits prevent reading of sensitive
application programs.
I Serial flash In-System Programming (ISP) allows coding while the device is mounted
in the end application.
I In-Application Programming (IAP) of the flash code memory. This allows changing the
code in a running application.
I Low voltage (brownout) detect allows a graceful system shutdown when power fails.
May optionally be configured as an interrupt.
I Idle and two different power-down reduced power modes. Improved wake-up from
Power-down mode (a LOW interrupt input starts execution). Typical power-down
current is 1 µA (total power-down with voltage comparators disabled).
I On-chip power-on reset allows operation without external reset components. A
software reset function is also available.
I Programmable external reset pin (P1.5) configuration options: open drain bidirectional
reset input/output, reset input with pull-up, push-pull reset output, input-only port. A
reset counter and reset glitch suppression circuitry prevent spurious and incomplete
resets.
I Only power and ground connections are required to operate the P89LPC952/954
when internal reset option is selected.
I Configurable on-chip oscillator with frequency range options selected by user
programmed flash configuration bits. Oscillator options support frequencies from
20 kHz to the maximum operating frequency of 18 MHz.
I Oscillator fail detect. The watchdog timer has a separate fully on-chip oscillator
allowing it to perform an oscillator fail detect function.
I Programmable port output configuration options: quasi-bidirectional, open drain,
push-pull, input-only.
I Port ‘input pattern match’ detect. Port 0 may generate an interrupt when the value of
the pins match or do not match a programmable pattern.
I Controlled slew rate port outputs to reduce EMI. Outputs have approximately 10 ns
minimum ramp times.
I Four interrupt priority levels.
I Eight keypad interrupt inputs, plus two additional external interrupt inputs.
I Schmitt trigger port inputs.
I Second data pointer.
I Extended temperature range.
I Emulation support.
www.DataSheet4U.com
P89LPC952_954_4
Product data sheet
Rev. 04 — 24 July 2008
© NXP B.V. 2008. All rights reserved.
2 of 69




 P89LPC952
NXP Semiconductors
P89LPC952/954
8-bit microcontroller with 10-bit ADC
3. Ordering information
Table 1. Ordering information
Type number
Package
Name
Description
P89LPC952FA
PLCC44 plastic leaded chip carrier; 44 leads
P89LPC952FBD
LQFP44
plastic low profile quad flat package; 44 leads;
body 10 × 10 × 1.4 mm
P89LPC954FA
PLCC44 plastic leaded chip carrier; 44 leads
P89LPC954FBD44 LQFP44
plastic low profile quad flat package; 44 leads;
body 10 × 10 × 1.4 mm
P89LPC954FBD48 LQFP48
plastic low profile quad flat package; 48 leads;
body 7 × 7 × 1.4 mm
Version
SOT187-2
SOT389-1
SOT187-2
SOT389-1
SOT313-2
3.1 Ordering options
Table 2. Ordering options
Type number
Flash memory
P89LPC952FA
8 kB
P89LPC952FBD
8 kB
P89LPC954FA
16 kB
P89LPC954FBD44 16 kB
P89LPC954FBD48 16 kB
Temperature range
40 °C to +85 °C
40 °C to +85 °C
40 °C to +85 °C
40 °C to +85 °C
40 °C to +85 °C
Frequency
0 MHz to 18 MHz
0 MHz to 18 MHz
0 MHz to 18 MHz
0 MHz to 18 MHz
0 MHz to 18 MHz
www.DataSheet4U.com
P89LPC952_954_4
Product data sheet
Rev. 04 — 24 July 2008
© NXP B.V. 2008. All rights reserved.
3 of 69



Recommended third-party P89LPC952 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)