DatasheetsPDF.com

- 260W. LPS152 Datasheet

DatasheetsPDF.com

- 260W. LPS152 Datasheet






LPS152 260W. Datasheet pdf. Equivalent




LPS152 260W. Datasheet pdf. Equivalent





Part

LPS152

Description

AC-DC / 136W - 260W



Feature


150 Watts LPS150 Series Total Power: 1 10-150 Watts Input Voltage: 85-132 / 17 0-264 VAC 220-300 VDC # of Outputs: Sin gle Electrical Specs Input Input range 85-132 VAC or 170-264 VAC automaticall y selected. 220-300 VDC 47-63 Hz 38 A m ax, cold start @ 25°C 75% typical at f ull load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B cond ucted VDE 0878 PT3 .
Manufacture

Emerson

Datasheet
Download LPS152 Datasheet


Emerson LPS152

LPS152; Class B conducted <0.5 mA @ 50/60 Hz, 26 4 VAC input Frequency Inrush current E fficiency EMI filter Special Features • • • • • • • • • • • • Auto ranging input Remote sens e Remote inhibit Power fail Single wire current sharing Built-in EMI filter Lo w output ripple Adjustable output 135 k hz switching frequency Overvoltage prot ection Overload protection Optional cover .


Emerson LPS152

(-C suffix). Safety ground leakage curr ent Output Maximum power 110 W convect ion (75 W with cover) 150 W with 30 CFM forced air (130 W with cover) ±5% min imum 20 ms @ 110 W load, 115/230 VAC no minal line Short circuit protection. Ca se overload protected @ 110% to 145% ab ove peak rating 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nom inal output TTL Log.


Emerson LPS152

ic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms bef ore loss of regulation. Requires an ext ernal TTL high signal to inhibit output s. Compensates for 0.5 V lead drop mini mum, will operate without remote sense connected. Reverse connection protected . Adjustment range Hold-up time Overlo ad protection Overvoltage protection Environmental Oper.

Part

LPS152

Description

AC-DC / 136W - 260W



Feature


150 Watts LPS150 Series Total Power: 1 10-150 Watts Input Voltage: 85-132 / 17 0-264 VAC 220-300 VDC # of Outputs: Sin gle Electrical Specs Input Input range 85-132 VAC or 170-264 VAC automaticall y selected. 220-300 VDC 47-63 Hz 38 A m ax, cold start @ 25°C 75% typical at f ull load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B cond ucted VDE 0878 PT3 .
Manufacture

Emerson

Datasheet
Download LPS152 Datasheet




 LPS152
150 Watts
LPS150 Series
Total Power: 110-150 Watts
Input Voltage: 85-132 / 170-264 VAC
220-300 VDC
# of Outputs: Single
Special Features
• Auto ranging input
• Remote sense
• Remote inhibit
• Power fail
• Single wire current sharing
• Built-in EMI filter
• Low output ripple
• Adjustable output
• 135 khz switching frequency
• Overvoltage protection
• Overload protection
• Optional cover (-C suffix).
Environmental
Operating temperature: 0° to 50°C ambient;
derate each output at 2.5% per degree from 50°
to 70°C
Electromagnetic susceptibility: Designed to
meet IEC 801, -2, -3, -4, -5,-6, Level 3
Humidity: Operating; non-condensing
5% to 95%
Vibration: Three orthogonal axes, sweep at
1 oct/min, 5 min. dwell at four major resonances
0.75 G peak 5 Hz to 500 Hz, operational
Storage temperature: -40° to 85°C
Temperature coefficient: ±.04% per °C
MTBF demonstrated: >550,000 hours at full load
and 25°C ambient conditions
Electrical Specs
Input
Input range
Frequency
Inrush current
Efficiency
EMI filter
Safety ground
leakage current
85-132 VAC
or 170-264 VAC automatically
selected.
220-300 VDC
47-63 Hz
38 A max, cold start @ 25°C
75% typical at full load
FCC Class B conducted
CISPR 22 Class B conducted
EN55022 Class B conducted
VDE 0878 PT3 Class B conducted
<0.5 mA @ 50/60 Hz, 264 VAC input
Output
Maximum power
Adjustment range
Hold-up time
Overload protection
Overvoltage protection
Logic Control
Power Failure
Remote inhibit
Remote sense
110 W convection (75 W with cover)
150 W with 30 CFM forced air
(130 W with cover)
±5% minimum
20 ms @ 110 W load, 115/230 VAC
nominal line
Short circuit protection. Case overload
protected @ 110% to 145% above
peak rating
5 V output: 5.7 to 6.7 VDC. Other
outputs 10% to 25% above nominal
output
TTL Logic signal goes high 50-150
msec after 5 V output. It goes low at
least 3 ms before loss of regulation.
Requires an external TTL high signal to
inhibit outputs.
Compensates for 0.5 V lead drop
minimum, will operate without
remote sense connected. Reverse
connection protected.
Safety
VDE
UL
CSA
NEMKO
BABT
CB
CE
0805/EN60950 (IEC950)
UL1950
CSA 22.2-234 Level 3
EN 60950/EMKO-TUE
(74-sec) 203
EN60950/BS7002
Certificate and report
Mark (LVD)
11774-3336-1260 (LC#88585)
EI32002
LR53982
P95102999
607019
2062
112 America’s (USA): 1-888-41-ASTEC
Europe (UK): 44 (1384) 842-211
Asia (HK): 852-2437-9662
rev 12.01.01




 LPS152
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Model
Number
Output
Voltage
Minimum
Load
Maximum Load with
Convection Cooling
LPS152
LPS153
LPS155
5V
12-(15) V
24-(28) V
0A
0A
0A
22 A
9.1 A
4.5 A
Maximum Load with
30 CFM Forced Air
30 A
12.5 A
6.2 A
Peak
Load1
35 A
14.5 A
7.2 A
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line and load ranges.
Note: -C suffix added to the model number indicates cover option.
Regulation2
Ripple
P/P (PARD)3
±2% 50 mV
±2% 150 mV
±2% 280 mV, max.
Connector
SK1 PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
SK2
PIN 5
PIN 6
PIN 7
SK3 TB-1
TB-2
SK4 PIN 1
PIN 3
PIN 5
Pin Assignments
LPS152
LPS153
LPS155
INHIBIT -ve
INHIBIT +ve
VCC
No Connection
COMMON
-SENSE
+SENSE
C SHARE
INHIBIT -ve
INHIBIT +ve
VCC
No Connection
COMMON
-SENSE
+SENSE
C SHARE
INHIBIT -ve
INHIBIT +ve
VCC
No Connection
COMMON
-SENSE
+SENSE
C SHARE
COMMON
PIN REMOVED
POK
COMMON
PIN REMOVED
POK
COMMON
PIN REMOVED
POK
COMMON
+5 V
COMMON
+12 to +15 V
COMMON
+24 to +28 V
GROUND
LINE
NEUTRAL
GROUND
LINE
NEUTRAL
GROUND
LINE
NEUTRAL
SK3
21
SK2
765
Do Not
Adjust
Output
Adjust
SK1
8765
1234
#6-32 (8 places)
.5625
7.4
(188.0)
8.5
(216.0)
Mating Connectors
(SK4) AC Input: Molex 09-50-8051 (USA)
Molex 09-91-0500 (UK)
PINS: 08-58-0111
(SK2) Power fail: Molex 09-50-8031 (USA)
Molex 09-91-0300 (UK)
PINS: 08-58-0111
(SK1) Remote sense/Remote inhibit:
Molex 51110-0851 (USA)
Pins: 50394-8100
531
SK4
4.25
(108.0)
1.5
(38.1)
.75 (19.0)
Astec Connector Kit #70-841-009, includes al of the above.
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Specifications are for convection rating at factory settings unless
otherwise stated.
4. Remote inhibit requires an external 5V @ 10mA to activate.
5. Mounting (6-32) maximum insertion depth is 0.12”.
6. Warranty: 1 year
7. Weight: 1.75 lb. / 0.80 kg
.875
(22.25)
2.5
(63.5)
www.astec.com
113










Recommended third-party LPS152 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)