DatasheetsPDF.com

85W Medical. LPS44-M Datasheet

DatasheetsPDF.com

85W Medical. LPS44-M Datasheet






LPS44-M Medical. Datasheet pdf. Equivalent




LPS44-M Medical. Datasheet pdf. Equivalent





Part

LPS44-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPS40-M Series 40 Watts Medica l Total Power: Input Voltage: # o f Outputs: 40-55 Watts 85-264 VAC 120- 300 VDC Single Rev. 9.8.09_28 LPS40-M Series  of 3 Electrical Specification s Special Features • • • • • • • • • • • Inp ut Input ra­nge: Frequency: Inrush cur rent: Input current: Efficiency: EMI filt.
Manufacture

Emerson

Datasheet
Download LPS44-M Datasheet


Emerson LPS44-M

LPS44-M; er: Safety ground leakage current: 85 - 264 VAC; 120 - 300 VDC 47 - 440 Hz < 18 A peak @ 115 VAC; <36A peak @ 230 VAC, cold start @ 25 °C 1A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted; CISPR 22 Class A conducte d; EN55022 Class A conducted; VDE 0878 PT3 Class A conducted < 75µA @ 50/60 H z, 264 VAC input Medical safety approv als Universal input .


Emerson LPS44-M

3” x 5” footprint Less than 1U high Remote sense on main output Low output ripple Adjustable 5V output Overvoltage protection Overload protection 110 KHz switching frequency LPX40 enclosure ki t available Output Maximum power: Adju stment range: Hold-up time: Overload pr otection: 40 W for convection; 55 W wit h 30CFM forced air -5, +10% minimum 20m s @ 40 W load, 115 VAC.


Emerson LPS44-M

nominal line Safety • VDE 0 750/EN60601-1 (IEC601) • UL UL2601 E182560 • CSA CSA 22.2 No.601.1 LR109492 • CE Mark (LVD) Shor t circuit protection on all outputs Cas e overload protected @ 110 - 145% above peak rating Overvoltage protection: 5V output; 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal o.

Part

LPS44-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPS40-M Series 40 Watts Medica l Total Power: Input Voltage: # o f Outputs: 40-55 Watts 85-264 VAC 120- 300 VDC Single Rev. 9.8.09_28 LPS40-M Series  of 3 Electrical Specification s Special Features • • • • • • • • • • • Inp ut Input ra­nge: Frequency: Inrush cur rent: Input current: Efficiency: EMI filt.
Manufacture

Emerson

Datasheet
Download LPS44-M Datasheet




 LPS44-M
Embedded Power for
Business-Critical Continuity
LPS40-M Series
40 Watts Medical
Total Power:
Input Voltage:
# of Outputs:
40-55 Watts
85-264 VAC
120-300 VDC
Single
Rev. 9.8.09_28
LPS40-M Series
 of 3
Special Features
• Medical safety approvals
• Universal input
• 3” x 5” footprint
• Less than 1U high
• Remote sense on main output
• Low output ripple
• Adjustable 5V output
• Overvoltage protection
• Overload protection
• 110 KHz switching frequency
• LPX40 enclosure kit available
Safety
VDE 0750/EN60601-1
(IEC601)
UL
UL2601 E182560
CSA CSA 22.2 No.601.1
LR109492
CE Mark (LVD)
Electrical Specifications
Input
Input ra­nge:
85 - 264 VAC; 120 - 300 VDC
Frequency:
47 - 440 Hz
Inrush current:
< 18A peak @ 115 VAC; <36A peak @ 230 VAC, cold start @ 25 °C
Input current:
1A max. (RMS) @ 115 VAC
Efficiency:
70% typical at full load
EMI filter:
FCC Class B conducted; CISPR 22 Class A conducted;
EN55022 Class A conducted; VDE 0878 PT3 Class A conducted
Safety ground
leakage current:
< 75µA @ 50/60 Hz, 264 VAC input
Output
Maximum power:
40 W for convection; 55 W with 30CFM forced air
Adjustment range:
-5, +10% minimum
Hold-up time:
20ms @ 40 W load, 115 VAC nominal line
Overload protection: Short circuit protection on all outputs
Case overload protected @ 110 - 145% above peak rating
Overvoltage protection: 5V output; 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal
output
Remote sense:
Compensates for 0.5 V lead drop minimum.
Will operate without remote sense connected.
Reverse connection protected.




 LPS44-M
Embedded Power for
Business-Critical Continuity
Environmental Specifications
Operating temperature: 0° to 50 °C ambient. Derate each output 2.5% per degree from 50° to 70 °C, -20 °C startup
Storage temperature: -40 °C to +85 °C
Temperature coefficient: ± 0.4% per °C
Electromagnetic
susceptibility:
Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3
Humidity:
Operating; non-condensing 5% to 95% RH
Vibration:
MTBF demonstrated:
Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G
peak 5 Hz to 500 Hz, operational
> 550,000 hours at full load and 25 °C ambient conditions
Rev. 9.8.09_28
LPS40-M Series
 of 3
Ordering Information
Model Number
Output
Voltage
Minimum Maximum Load with Maximum Load with
Load
Convection cooling 30CFM Forced Air
Peak
Load1
Regulation2
LPS42-M
5V 0A
8A
11 A 12 A ± 2%
LPS43-M
12 V 0 A
3.3 A
4.5 A
5 A ± 2%
LPS44-M
15 V 0 A
2.6 A
3.6 A
4 A ± 2%
LPS45-M
24 V 0 A
1.6 A
2.3 A
2.5 A
± 2%
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
Ripple P/P
(PARD)3
50mV
120 mV
150 mV
240 mV
Power Derating Curve
55W
30 CFM Forced Air Cooling
40W
Output 30W
Power
(Watts) 20W
Natural
Convection
Cooling
27.5W
20W
10W
0W
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
TA – Ambient Temperature – °C




 LPS44-M
Embedded Power for
Business-Critical Continuity
Mechanical Drawing
0.22"
(5.6)
M1 GND
3.00"
(76.2)
2.55"
(64.8)
SK 1
3N
1L
4.55"
(115.6)
5.00"
(127)
M2
SK201 _ +
Remote Sense
Connector
Voltage
Adj. Pot
1 SK 2
2
3
4
5
6
0.15" (4)
DIA (4 places)
1.14"
(29)
0.197"
(5)
Pin Assignments
Connector LPS42-M LPS43-M LPS44-M LPS45-M
SK1-1
SK1-3
Neutral Neutral Neutral Neutral
Line Line Line Line
SK2-1 +5V +12V +15V +24V
SK2- 2 +5V +12V +15V +24V
SK2- 3 +5V +12V +15V +24V
SK2-4
Common Common Common Common
SK2-5
SK2-6
SK201-1
SK201-2
Common Common Common Common
Common Common Common Common
+Sense +Sense +Sense +Sense
-Sense -Sense -Sense -Sense
Mating­ Connectors
AC Input:
Molex 09-50-8031 (USA)
09-91-0300 (UK)
PINS: 08-52-0113
DC Outputs:
Molex 09-50-8061 (USA)
09-91-0600 (UK)
PINS: 08-52-0113
Remote Sense: Molex 22-01-2025
PINS: 08-52-0123
Emerson Network Power Connector Kit #70-841-006, includes all of
the above
1. Specifications subject to change without notice.
­2. All dimensions in inches (mm), tolerance is ± 0.02”­­ (± 0.5mm)
3. Mounting holes M1 and M2 should be grounded for EMI
purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory settings at
115 VAC input, 25 °C unless otherwise stated.
6. Warranty: 2 year
7. Weight: 0.5lbs/0.23kg
­Americas
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Rev. 9.8.09_28
LPS40-M Series
 of 3
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.PowerConversion.com
techsupport.embeddedpower
@emerson.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2009 Emerson Electric Co.






Recommended third-party LPS44-M Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)