6.3 TFT-LCD Interface Signal Description
The module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD
interface and a high-speed data transfer device.
Input Signal Interface
Pin No. Symbol Description
1 VDD Power Supply, 3.3V (typical)
2 VDD Power Supply, 3.3V (typical)
3 GND Ground
4 SEL68 6/ 8bits LVDS data input selection [H: 8bits L/NC: 6bit]
5 RIN0- LVDS receiver signal channel 0
6 RIN0+ LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0)
7 GND Ground
8 RIN1- LVDS receiver signal channel 1
9 RIN1+ LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1)
10 GND Ground
11 RIN2- LVDS receiver signal channel 2
12 RIN2+ LVDS Differential Data Input (B2, B3, B4, B5, HS, VS, DE)
13 GND Ground
14 CLKIN- LVDS receiver signal clock
16 GND Ground
17 RIN3- LVDS receiver signal channel 3, NC for 6 bit LVDS Input
18 RIN3+ LVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)
19 RSV Reverse Scan Function [H: Enable; L/NC: Disable]
20 NC/GND Reserved for AUO internal test. Please treat it as NC.
Note 1: Input Signals shall be in low status when VDD is off.
Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”.
Note 3: RSV stands for “Reserved”.
G121SN01 V4 rev. 0.0