Bridge Rectifiers. GBJ25K Datasheet

GBJ25K Rectifiers. Datasheet pdf. Equivalent

Part GBJ25K
Description (GBJ25A - GBJ25M) Glass Passivated Single-Phase Bridge Rectifiers
Feature GBJ25A thru GBJ25M Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000 Volts .
Manufacture GOOD-ARK
Datasheet
Download GBJ25K Datasheet



GBJ25K
GBJ25A thru GBJ25M
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 25.0 Amperes
Features
Thin Single In-Line package
Ideal for printed circuit boards
Glass passivated chip junction
High surge current capability
High case dielectric strength of 2500 VRMS
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Mechanical Data
Case: GBJ(5S)
Epoxy meets UL-94V-0 Flammability rating
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260oC/10 seconds, 0.375 (9.5mm) lead length,
5lbs.(2.3kg) tension
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment,
Industrial Automation applications
Package outline dimensions in millimeters
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols GBJ25A GBJ25B GBJ25D GBJ25G GBJ25J GBJ25K GBJ25M Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified output current at
TC=98oC
TA=25oC
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
VRRM
VRMS
VDC
IF(AV)
IFSM
I2t
50 100 200 400 600 800 1000
35 70 140 280 420 560 700
50 100 200 400 600 800 1000
25 (1)
3.5 (2)
350
500
Maximum instantaneous forward voltage drop per leg at 12.5A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
TA=125oC
Typical thermal resistance per leg
Dielectric strength (Therminals to case, AC 1 minute)
VF
IR
RθJA
RθJC
V
ISO
1.0
5
250
22 (2)
1.0 (1)
2500
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes:
1. Unit case mounted on 26.5x26.5x0.15cm thick Al plate heatsink
2. Units mounted on P.C.B. without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Volts
Volts
Volts
Amps
Amps
A2sec
Volt
uA
oC/W
Volts
oC
476
Free Datasheet http://www.datasheet4u.com/



GBJ25K
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
477
Free Datasheet http://www.datasheet4u.com/







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)