Compatible Optocouplers. HCNW2601 Datasheet

HCNW2601 Datasheet PDF, Equivalent


Part Number

HCNW2601

Description

High Speed TTL Compatible Optocouplers

Manufacture

Avago

Total Page 21 Pages
PDF Download
Download HCNW2601 Datasheet PDF


HCNW2601 Datasheet
6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600,
HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661,
HCPL-2601, HCPL-2611, HCPL-2630, HCPL-2631, HCPL-4661
High CMR, High Speed TTL Compatible Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The 6N137, HCPL-26xx/06xx/4661, HCNW137/26x1 are
optically coupled gates that combine a GaAsP light emit-
ting diode and an integrated high gain photo detector.
An enable input allows the detector to be strobed. The
output of the detector IC is an open collector Schottky-
clamped transistor. The internal shield provides a guar-
anteed common mode transient immunity specification
up to 15,000 V/µs at Vcm = 1000 V.
This unique design provides maximum AC and DC circuit
isolation while achieving TTL compatibility. The optocou-
pler AC and DC operational param­e­ters are guaranteed
from -40 °C to +85 °C allowing troublefree system per-
formance.
Functional Diagram
6N137, HCPL-2601/2611
HCPL-0600/0601/0611
HCPL-2630/2631/4661
HCPL-0630/0631/0661
NC 1
8 VCC
ANODE 1 1
8 VCC
ANODE 2
7 VE
CATHODE 1 2
7 VO1
CATHODE 3
NC 4
SHIELD
6 VO
5 GND
CATHODE 2 3
ANODE 2 4
SHIELD
6 VO2
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED ENABLE OUTPUT
ON H
L
OFF H
H
ON L
H
OFF L
H
ON NC
L
OFF NC
H
TRUTH TABLE
(POSITIVE LOGIC)
LED OUTPUT
ON L
OFF H
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
Features
15 kV/µs minimum Common Mode Rejection (CMR)
aHtCVPCML- =0611k1V,
for HCNW2611,
HCPL-0661
HCPL-2611,
HCPL-4661,
High speed: 10 MBd typical
LSTTL/TTL compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over temper­
ature: -40 °C to +85 °C
Available in 8-Pin DIP, SOIC-8, widebody packages
Strobable output (single channel products only)
Safety approval
UL
for
r1emcoignnuitzeepde-r3U7L5105V7r7msCfoSAr 1apmpinrouvteedand
5000 
Vrms*
IEC/EN/DIN EN 60747-5-5 approved with  
VVVIIIOOORRRMMM   === 1564631704VVVppeepaaekkafkfooforr r06H6NxC1xN3O7W/p21t6i3ox7nx/2O066px0t1i on 0 60  
MIL-PRF-38534 hermetic version available
(HCPL-56xx/66xx)
Applications
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Power transistor isolation in motor drives
Isolation of high speed logic systems
*5000 Vrms/1 Minute rating is for HCNW137/26X1 and Option 020
(6N137, HCPL-2601/11/30/31, HCPL-4661) products only.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Free Datasheet http://www.Datasheet4U.com

HCNW2601 Datasheet
The 6N137, HCPL-26xx, HCPL-06xx, HCPL-4661, HCNW137,
and HCNW26x1 are suitable for high speed logic interfac-
ing, input/output buffering, as line receivers in environ-
ments that conventional line receivers cannot tolerate
and are recom­mended for use in extremely high ground
or induced noise environments.
Selection Guide
Widebody
Minimum CMR
8-Pin DIP (300 Mil)
Small-Outline SO-8
(400 Mil)
Hermetic
Input Single
On- Single Dual Single Dual Single and Dual
(dVV//µdst) (VVCM) Cu(mrrAen) t OEnuatpbulet PChacaknangeel PChacaknangeel PChacaknangeel PChacaknangeel PChacaknangeel PCahcaknangeels
1000 10 5 YES
6N137
5,000 1,000 5 YES
HCPL-0600
HCNW137
NO HCPL-2630 HCPL-0630
10,000 1,000 YES HCPL-2601 HCPL-0601 HCNW2601
NO HCPL-2631 HCPL-0631
15,000 1,000 YES HCPL-2611 HCPL-0611 HCNW2611
NO HCPL-4661 HCPL-0661
1,000 50
YES HCPL-2602[1]
3, 500 300
YES HCPL-2612[1]
1,000 50 3 YES HCPL-261A[1] HCPL-061A[1]
NO HCPL-263A[1] HCPL-063A[1]
1,000[2] 1,000 YES HCPL-261N[1] HCPL-061N[1]
NO HCPL-263N[1] HCPL-063N[1]
1,000 50 12.5 [3] HCPL-193x[1]
HCPL-56xx[1]
HCPL-66xx[1]
Notes:
1. Technical data are on separate Avago publications.
2. 15 kV/µs with VCM = 1 kV can be achieved using Avago application circuit.
3. Enable is available for single channel products only, except for HCPL-193x devices.
2
Free Datasheet http://www.Datasheet4U.com


Features Datasheet pdf 6N137, HCNW137, HCNW2601, HCNW2611, HCPL -0600, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL- 2611, HCPL-2630, HCPL-2631, HCPL-4661 H igh CMR, High Speed TTL Compatible Opto couplers Data Sheet Lead (Pb) Free RoH S 6 fully compliant RoHS 6 fully compli ant options available; -xxxE denotes a lead-free product Description The 6N13 7, HCPL-26xx/06xx/4661, HCNW137/26x1 ar e optically coupled gates that combine a GaAsP light emitting diode and an int egrated high gain photo detector. An en able input allows the detector to be st robed. The output of the detector IC is an open collector Schottkyclamped tran sistor. The internal shield provides a guaranteed common mode transient immuni ty specification up to 15,000 V/µs at Vcm = 1000 V. This unique design provid es maximum AC and DC circuit isolation while achieving TTL compatibility. The optocoupler AC and DC operational param ­ e­ ters are guaranteed from -40 °C to +85 °C allowing troublefree system performance. Features • 15.
Keywords HCNW2601, datasheet, pdf, Avago, High, Speed, TTL, Compatible, Optocouplers, CNW2601, NW2601, W2601, HCNW260, HCNW26, HCNW2, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)