receiver module. IT600 Datasheet

IT600 module. Datasheet pdf. Equivalent

IT600 Datasheet
Recommendation IT600 Datasheet
Part IT600
Description OEM GPS receiver module
Feature IT600; Revision 1.6 Data Sheet IT600 This document describes operation, connectivity and electrical specifi.
Manufacture Fastrax
Datasheet
Download IT600 Datasheet




Fastrax IT600
Revision 1.6
Data Sheet
IT600
This document describes operation, connectivity and electrical specifications of Fastrax IT600
OEM GNSS receiver module.
March 30, 2012
Fastrax Ltd



Fastrax IT600
Page 2 of 44
TRADEMARKS
Fastrax is a registered trademark of Fastrax Ltd.
All other trademarks are trademarks or registered trademarks of their respective holders.
COPYRIGHT
© 2011 Fastrax Ltd
DISCLAIMER
This document is compiled and kept up-to-date as conscientiously as possible. Fastrax Ltd. cannot, however,
guarantee that the data are free of errors, accurate or complete and, therefore, assumes no liability for loss or
damage of any kind incurred directly or indirectly through the use of this document. The information in this
document is subject to change without notice and describes only generally the product defined in the introduction
of this documentation. Fastrax products are not authorized for use in life-support or safety-critical applications.
Use in such applications is done at the sole discretion of the customer. Fastrax will not warrant the use of its
devices in such applications.
REFERENCES
Ref. #
(1)
(2)
(3)
(4)
File name
Document description
STA8088EX Databrief Rev1.pdf
ST GNSS NMEA specification and
commands 3.2.pdf
NMEA 0183 - Standard For
Interfacing Marine Electronic Devices
Version 3.01 - January 1, 2002
reflow_sodering_profile.pdf
STA8088EX Datasheet
ST GNSS NMEA specification and
commands, rev 3.2
Available from www.nmea.org
Module Soldering Profile
2012-03-30
IT600_Datasheet



Fastrax IT600
Page 3 of 44
CHANGE LOG
Rev.
0.1
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Notes
Date
First Draft
Preliminary release; draft status
Added operational modes; draft status
Update for IT600C01 and AP600C01
Minor update
Release status; updated performance spec; corrected
XSTANDBY signal to level sensitive; corrected and clarified
Standby mode operation; named firmware configuration to
ITX; updated absolute and electrical characteristic tables;
added and updated notes to cover all I/O; added notes and
limitation on Antenna Bias current & switch dissipation.
Changed optional ODO input function from pin 27 to pin 10;
corrected typo in Table 6: changed TM to PPS; added
Appendix A
Corrected module orientation mark position in Tape&Reel
spec
2011-03-24
2011-06-10
2011-07-12
2011-08-03
2011-08-25
2011-10-05
2011-12-14
2012-03-30
2012-03-30
IT600_Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)