F2MC-8FX MB95200H/210H Series
MB95200H/210H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction
set, the microcontrollers of this series contain a variety of peripheral resources.
Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
• F2MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instructions
• Bit manipulation instructions, etc.
• Selectable main clock source
Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz)
External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz)
Main internal CR clock (1/8/10/12.5 MHz ± 2%, maximum machine clock frequency: 12.5 MHz)
• Selectable subclock source
Sub-OSC clock (32.768 kHz)
External clock (32.768 kHz)
Sub-internal CR clock (typ: 100 kHz, min: 50 kHz, max: 200 kHz)
The information for microcontroller supports is shown in the following homepage.
Be sure to refer to the "Check Sheet" for the latest cautions on development.
"Check Sheet" is seen at the following support page
"Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in
Copyright©2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved