Receiver Modules. TSSP6038 Datasheet

TSSP6038 Modules. Datasheet pdf. Equivalent

Part TSSP6038
Description IR Receiver Modules
Feature www.vishay.com TSSP6038 Vishay Semiconductors IR Receiver Modules for Remote Control Systems 4 3 .
Manufacture Vishay
Datasheet
Download TSSP6038 Datasheet



TSSP6038
www.vishay.com
TSSP6038
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
4
3
2
1
MECHANICAL DATA
Pinning
1 = GND, 2 = N.C., 3 = VS, 4 = OUT
ORDERING CODE
Taping:
TSSP6038TT - top view taped
TSSP6038TR - side view taped
16797
FEATURES
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Taping available for top view and side view
assembly
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The TSSP6038 is a compact IR receiver for sensor
applications. It has a high gain for IR signals at 38 kHz. The
detection level does not change when ambient light or
strong IR signals are applied. It can receive continuous
38 kHz signals or 38 kHz bursts.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
Carrier frequency 38 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
BLOCK DIAGRAM
33 kΩ
Input
AMP
Band
pass
Demo -
dulator
PIN
16839-4
3
VS
4
OUT
1
GND
TSSP6038
Panhead
1 = GND, 2 = N.C., 3 = VS, 4 = OUT
7.5 W x 5.3 H x 4.0 D
SMD
Presence sensors
APPLICATION CIRCUIT
17170-10
Transmitter
with
TSALxxxx
IR receiver
VS
OUT
GND
R1
C1
VO
+ VS
µC
GND
The external components R1 and C1 are optional
to improve the robustness against electrical overstress
(typical values are R1 = 100 Ω, C1 = 0.1 µF).
Rev. 1.2, 05-Feb-14
1 Document Number: 82483
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



TSSP6038
www.vishay.com
TSSP6038
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage
Supply current
Output voltage
Output current
Junction temperature
Storage temperature range
Operating temperature range
Power consumption
Tamb 85 °C
VS
IS
VO
IO
Tj
Tstg
Tamb
Ptot
-0.3 to +6
5
-0.3 to (VS + 0.3)
5
100
-25 to +85
-25 to +85
10
V
mA
V
mA
°C
°C
°C
mW
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
Supply current (pin 3)
Ev = 0, VS = 5 V
Ev = 40 klx, sunlight
ISD 0.55 0.7
ISH 0.8
0.9
Supply voltage
VS 2.5
5.5
Transmission distance
Ev = 0, test signal see fig. 1,
IR diode TSAL6200, IF = 400 mA
d
25
Output voltage low (pin 1)
IOSL = 0.5 mA, Ee = 2 mW/m2,
test signal see fig. 1
VOSL
100
Minimum irradiance
Pulse width tolerance:
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Ee min.
0.7 1.2
Maximum irradiance
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Ee max.
50
Directivity
Angle of half transmission
distance
ϕ1/2
± 50
UNIT
mA
mA
V
m
mV
mW/m2
W/m2
deg
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
E e Optical Test Signal
(IR diode TSAL6200, IF = 0.4 A, 30 pulses, f = f0, t = 10 ms)
t
tpi *
T
* tpi 10/f0 is recommended for optimal function
VO Output Signal
VOH
1) 7/f0 < td < 15/f0
2) tpi - 5/f0 < tpo < tpi + 6/f0
16110
VOL
td 1)
tpo 2)
t
Fig. 1 - Output Active Low
1.0
Output pulse width
0.9
0.8
0.7 Input burst length
0.6
0.5
0.4
0.3
0.2
λ = 950 nm,
optical test signal, Fig. 1
0.1
1 10 100 1000
10 000 100 000
Ee - Irradiance (mW/m2)
Fig. 2 - Pulse Length and Sensitivity in Dark Ambient
Rev. 1.2, 05-Feb-14
2 Document Number: 82483
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)