DC/DC Converters. LSN2-T-6-D12 Datasheet

LSN2-T-6-D12 Converters. Datasheet pdf. Equivalent


Murata LSN2-T-6-D12
www.murata-ps.com
Typical Unit
FEATURES
User-selectable outputs: 0.75-5V
(D12 models) or 0.75-3.3V (W3 models)
6, 10 or 16A maximum output current
Double lead free to RoHS standards
Selectable phased start-up sequencing
and tracking
Wide range VIN 8.3-14V or 2.4-5.5V
Up to 52 Watts total output power
Very high efficiency up to 95%
Starts up into pre-biased load
Fast settling, high di/dt IOUT slew rate
PRODUCT OVERVIEW
These miniature point-of-load (POL) switch-
ing DC/DC converters are ideal regulation and
supply elements for mixed voltage systems. Fully
compatible with the Distributed-power Open
Standards Alliance specification (www.dosa-
power.com), LSN2’s can power CPU’s, program-
mable logic and mixed-voltage systems with little
heat and low noise. A typical application uses a
master isolated 12 or 5Vdc supply and individual
LSN2 converters for local 1.8 and 3.3Vdc sup-
plies. All system isolation resides in the central
supply, leaving lower cost POL regulation at the
load. The LSN2’s can deliver very high power (to
52 Watts) in a tiny area without heat sinking or
external components. They feature quick transient
response (to 25µsec) and very fast current slew
rates (to 20A/µsec).
Pb
Lead-free
construction/attach
LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A
Selectable-Output DC/DC Converters
ORDERING GUIDE SUMMARY
Model
Vout Range
LSN2-T/6-W3-C
0.75-3.3V
LSN2-T/6-D12
0.75-5V
LSN2-T/6-D12-C
0.75-5V
LSN2-T/6-D12G
0.75-5V
LSN2-T/6-D12-GC
0.75-5V
LSN2-T/6-D12N
LSN2-T/6-D12-NC
LSN2-T/6-D12NG
0.75-5V
0.75-5V
0.75-5V
LSN2-T/6-D12-NGC
0.75-5V
LSN2-T/10-W3-C
0.75-3.3V
LSN2-T/10-D12-C
0.75-5V
LSN2-T/16-W3-C
0.75-3.3V
LSN2-T/16-D12-C
0.75-5V
Iout Range
0-6A
0-6A
0-6A
0-6A
0-6A
0-6A
0-6A
0-6A
0-6A
0-10A
0-10A
0-16A
0-16A
Vin Range
2.4-5.5V
8.3-14V
8.3-14V
8.3-14V
8.3-14V
8.3-14V
8.3-14V
8.3-14V
8.3-14V
2.4-5.5V
8.3-14V
2.4-5.5V
8.3-14V
Ripple/Noise
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
15mVp-p
30mVp-p
25mVp-p
30mVp-p
Efficiency
94%
93%
93%
93%
93%
93%
93%
93%
93%
95%
95%
95%
94%
INPUT CHARACTERISTICS
Parameter
Voltage Range
Current, full power
Undervoltage Shutdown
Short Circuit Current
Remote On/Off Control
OUTPUT CHARACTERISTICS
Parameter
Voltage
Current
Power Dissipation
Accuracy
Ripple & Noise
Line and Load Regulation
Overcurrent Protection
Overtemperature Protection
Efficiency (minimum)
Efficiency (typical)
Typ. @ 25°C, full load
2.4-5.5 or 8.3-14V
4.22 to 11.12A
Included
60mA
Positive or negative polarity
Notes
5V or 12V nominal models
Model dependent
With autorestart hysteresis
Output is short circuited
Default polarity is positive
Typ. @ 25°C, full load
0.75-3.3 or 0.75-5V
0-6, 0-10 or 0-16A
20, 33, 52W max.
±2% of VNOM
15-75mVpp
±0.03%
Hiccup autorecovery
+115°C shutdown
92-93%
94-95%
Notes
User adjustable, model dependent
Three ranges, model dependent
Three values, model dependent
50% load
Model dependent
Continuous short circuit protection
Model dependent
Model dependent
GENERAL SPECIFICATIONS
Parameter
Transient Response
Operating Temperature Range
Safety (designed to meet)
EMI (designed to meet)
Typ. @ 25°C, full load
25μsec
–40 to +85°C
UL/IEC/EN 60950-1
FCC pt.15, class B
Notes
50% load step to 2% of final value
With 200 lfm airflow
And CSA C22.2-No.234
May need external filter
MECHANICAL CHARACTERISTICS
6 Amp output models
0.50 x 1.00 x 0.275 inches (12.7 x 25.4 x 6.98 mm)
10 & 16 Amp models
0.50 x 2.00 x 0.32 inches (12.7 x 50.8 x 8.13 mm)
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_LSN2.D01∆  Page 1 of 15


LSN2-T-6-D12 Datasheet
Recommendation LSN2-T-6-D12 Datasheet
Part LSN2-T-6-D12
Description Selectable-Output DC/DC Converters
Feature LSN2-T-6-D12; www.murata-ps.com Typical Unit FEATURES ■ User-selectable outputs: 0.75-5V (D12 models) or 0.75-3.3.
Manufacture Murata
Datasheet
Download LSN2-T-6-D12 Datasheet




Murata LSN2-T-6-D12
LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A
Selectable-Output DC/DC Converters
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Output
Root Model
Vout
(Volts)
Iout
(Amps)
Power
(Watts)
R/N (mVp-p)
Typ. Max.
LSN2-T/6-W3
0.75-3.3
6
19.8 25
40
LSN2-T/6-D12
0.75-5
6
30 15 25
LSN2-T/10-W3
0.75-3.3 10
33.0
15
25
LSN2-T/10-D12
0.75-5
10
50
30
75
LSN2-T/16-W3
0.75-3.3 16
52.8
25
50
LSN2-T/16-D120.75-5
16
80
30
75
LSN2-T/30-D12
0.8-5
30
150
Input
Regulation
Line Load
Vin Nom. Range Iin
(Volts) (Volts) (mA/A)
Efficiency
Min. Typ.
±0.075% ±0.055% 5
2.4-5.5 50/4.2 93.1% 94.3%
±0.3% ±0.3%
12
8.3-14 70/2.69 90%
93%
±0.3% ±0.3% 5 2.4-5.5 50/6.95 93% 95%
±0.3% ±0.3% 12 8.3-14 100/4.39 93% 95%
±0.3% ±0.3% 5 2.4-5.5 50/11.12 93% 95%
±0.3% ±0.3% 12 8.3-14 100/7.1 92% 94%
Please refer to the separate LSN2-T/30 data sheet.
Package
(Case/
Pinout)
B12, P69
B12, P69
B11, P68
B11, P68
B11, P68
B11, P68
Typical at Ta = +25°C under nominal line voltage and full-load conditions, unless noted. All models
are tested and specified with external 22µF tantalum input and output capacitors. These capacitors
are necessary to accommodate our test equipment and may not be required to achieve specified
performance in your applications. See I/O Filtering and Noise Reduction. “Nominal” output is 3.3V
(W3 models) or 5V (D12 models)
Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with external
filtering. See I/O Filtering and Noise Reduction for details.
These devices have no minimum-load requirements and will regulate under no-load conditions. Regula-
tion specifications describe the output-voltage deviation as the line voltage or load is varied from its
nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
VIN must be 0.5V greater than VOUT.
LSN2-TXX-D12 efficiencies are shown at 5VOUT.
These are not complete model numbers. Please refer to the Part Number Structure when ordering.
PART NUMBER STRUCTURE
L SN2 - T / 16 - D12 N G - C
Output Configuration:
L = Unipolar
Low Voltage
Non-Isolated Through-hole
Nominal Output Voltage:
0.75-3.3 Volts (W3)
0.75-5 Volts (D12)
RoHS-6 hazardous substance compliant
Power Good Output:
Blank = Omitted
G = Installed
On/Off Polarity:
Blank = Positive polarity
N = Negative polarity
These devices have no minimum-load requirements and will regu-
late under no-load conditions. Regulation specifications describe
the output-voltage deviation as the line voltage or load is varied
from its nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
VIN must be 0.5V greater than VOUT.
LSN2-TXX-D12 efficiencies are shown at 5VOUT.
These are not complete model numbers. Please refer to the
Part Number Structure when ordering.
Maximum Rated Output:
Current in Amps
Input Voltage Range:
D12 = 8.3-14 Volts (12V nominal)
W3 = 2.4-5.5 Volts (5V nominal)
Note:
Some model number combinations may
not be available. Contact Murata Power
Solutions for further information.
www.murata-ps.com/support
MDC_LSN2.D01∆  Page 2 of 15



Murata LSN2-T-6-D12
Performance/Functional Specifications(1)
INPUT
Input Voltage Range
Isolation
Start-Up Threshold
W3 Models
12V Models
See Ordering Guide
Not isolated, input and output commons
are internally connected
2.2 Volts
8 Volts
Undervoltage Shutdown
W3 Models
12V Models
2.0 Volts
7.5 Volts
Overvoltage Shutdown
None
Reflected (Back) Ripple Current(2)
10-70mAp-p (model dependent)
Internal Input Filter Type
Capacitive
Reverse Polarity Protection
Input Current:
Full Load Conditions
Inrush Transient
Shutdown Mode (Off, UV, OT)
Output Short Circuit
No Load
W3 models
12V models
Low Line (Vin = Vmin)
LSN2-T/6-W3
LSN2-T/6-D12
LSN2-T/10-W3
LSN2-T/10-D12
LSN2-T/16-W3
LSN2-T/16-D12
Remote On/Off Control: (5)
Positive Logic (no model suffix)
Negative Logic (“N” model suffix)
Current
See fuse information
See Ordering Guide
0.1A2sec
5mA
60mA
50mA
100mA
5.54 Amps
3.85 Amps
9.14 Amps
6.31 Amps
14.63 Amps
10.2 Amps
OFF = ground pin to +0.8V max.
ON = open pin or +2.5V min. to +Vin max.
ON = open pin to +0.3V max.
OFF = +2.5V min. to +Vin max.
1mA max.
OUTPUT
Voltage Output Range
See Ordering Guide
Minimum Loading
No minimum load
Accuracy (50% load)
Voltage Adjustment Range (13)
±2% of Vnom
See Ordering Guide
Temperature Coefficient
±0.02% of Vout range per °C
Ripple/Noise (20 MHz bandwidth)
See Ordering Guide and (8)
Line/Load Regulation (See Tech Notes) See Ordering Guide and (10)
Efficiency
Maximum Capacitive Loading: (15)
LSN2-T/6 models:
Cap-ESR = 0.001 to 0.01W
Cap-ESR >0.01W
LSN2-T/10 and -T/16 models:
Cap-ESR = 0.001 to 0.01W
Cap-ESR >0.01W
See Ordering Guide
3000µF
5000µF
5000µF
10,000µF
LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A
Selectable-Output DC/DC Converters
Current Limit Inception: (98% of Vout)
LSN2-T/6 models
11-13 Amps (cold startup)
11 Amps (after warm up)
LSN2-T/10 models
18.75 Amps (cold startup)
16.75 Amps (after warm up)
LSN2-T/16 models
24 Amps (cold startup)
21 Amps (after warm up)
Short Circuit Mode (6)
Short Circuit Current Output
Protection Method (17)
Short Circuit Duration
Prebias Startup (16)
Sequencing
Slew Rate
Startup delay until sequence start
Tracking accuracy, rising input
Tracking accuracy, falling input
Sequence pin input impedance
Remote Sense to Vout
Power Good Output (14)
(“G” suffix)
Power_Good Configuration
600mA
Hiccup autorecovery on overload removal
Continuous, no damage (output shorted
to ground)
Converter will start up if the external
output voltage is less than Vnom
2V max. per millisecond
10 milliseconds
Vout = ±100mV of Sequence In
Vout = ±200mV of Sequence In
400kW to 1MW
0.5V max. (7)
TRUE (OK) = open drain
FALSE (not OK) = Signal Ground to 0.4V
MOSFET to ground with external user
pullup, 10mA max. sink
DYNAMIC CHARACTERISTICS
Dynamic Load Response
25µsec to ±2% of final value
(50-100-50% load step, di/dt = 20A/msec)
Start-Up Time
4-7msec for Vout = nominal
(Vin on to Vout regulated or On/Off to Vout)
Switching Frequency
LSN2-T/6 models
LSN2-T/10 and -T/16 models
315kHz
230kHz
ENVIRONMENTAL
Calculated MTBF (4)
TBC Hours
Operating Temperature Range (Ambient)
No derating, natural convection
–40 to +63°C, vertical mount, 2.5Vout (9)
With derating
Operating PC Board Temperature
See Derating Curves
–40 to +100°C max. (12)
Storage Temperature Range
–55 to +125°C
Thermal Protection/Shutdown
Relative Humidity
+115°C
To +85% / +85°C
PHYSICAL
Outline Dimensions
Removable Heat Shield
Pin Material
Weight
Electromagnetic Interference
(conducted and radiated)
Safety
Flammability Rating
See Mechanical Specifications
Nylon 46
Tin-plated copper alloy
0.28 ounces (7.8 grams)
FCC part 15, class B, EN55022
(may need external filter)
UL/cUL 60950-1, CSA-C22.2 No.234
IEC/EN 60950-1
UL94V-0
www.murata-ps.com/support
MDC_LSN2.D01∆  Page 3 of 15







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)