DatasheetsPDF.com

MOSFET Driver. SM8028 Datasheet

DatasheetsPDF.com

MOSFET Driver. SM8028 Datasheet






SM8028 Driver. Datasheet pdf. Equivalent




SM8028 Driver. Datasheet pdf. Equivalent





Part

SM8028

Description

Dual MOSFET Driver



Feature


SM8028 Optically Coupled Dual MOSFET Dri ver w/Discharge Circuit Description Th e SM8028 is composed of two distinct MO SFET drivers in a single package. Each driver circuit consists of an input dri ve LED optically coupled to a photodiod e array output designed to drive highly capacitive loads, including the gate o f a power MOSFET. The active discharge circuit of the PDA.
Manufacture

Solid State Optronic

Datasheet
Download SM8028 Datasheet


Solid State Optronic SM8028

SM8028; s assures quick discharge of MOSFETs, pr oviding fast turn-off times. This devic e can be used as two separate drivers, or can be wired as a single enhanced dr iver with either greater photo current or photo voltage output. The SM8028 com es standard in a compact 8 pin DIP pack age making it ideal for high-density bo ard applications. Applications Isolate d means to drive d.


Solid State Optronic SM8028

iscrete power MOSFETs Lighting Controls Process Control Modules Solid State Relays Solenoid Controls Schematic Dia gram Features Compact 8 pin DIP/SMD package Built in active discharge circ uit for fast turn-off Fast Turn-On Op tional Parallel or Serial Output Connec tions 11V Gate Drive Voltage High Inp ut-to-Output Isolation (up to 5kVRMS) Long Life / High R.


Solid State Optronic SM8028

eliability RoHS / Pb-Free / REACH Compl iant Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 6074 7-5-2) Absolute Maximum Ratings The va lues indicated are absolute stress rati ngs. Functional operation of the device is not implied at these or any conditi ons in excess of those defined in elect rical characteristics section of this d ocument. Exposure .

Part

SM8028

Description

Dual MOSFET Driver



Feature


SM8028 Optically Coupled Dual MOSFET Dri ver w/Discharge Circuit Description Th e SM8028 is composed of two distinct MO SFET drivers in a single package. Each driver circuit consists of an input dri ve LED optically coupled to a photodiod e array output designed to drive highly capacitive loads, including the gate o f a power MOSFET. The active discharge circuit of the PDA.
Manufacture

Solid State Optronic

Datasheet
Download SM8028 Datasheet




 SM8028
SM8028
Optically Coupled
Dual MOSFET Driver
w/Discharge Circuit
Description
The SM8028 is composed of two distinct MOSFET drivers
in a single package. Each driver circuit consists of an input
drive LED optically coupled to a photodiode array output
designed to drive highly capacitive loads, including the gate
of a power MOSFET. The active discharge circuit of the
PDAs assures quick discharge of MOSFETs, providing fast
turn-off times. This device can be used as two separate
drivers, or can be wired as a single enhanced driver with
either greater photo current or photo voltage output.
The SM8028 comes standard in a compact 8 pin DIP
package making it ideal for high-density board applications.
Applications
Isolated means to drive discrete power MOSFETs
Lighting Controls
Process Control Modules
Solid State Relays
Solenoid Controls
Schematic Diagram
Features
Compact 8 pin DIP/SMD package
Built in active discharge circuit for fast turn-off
Fast Turn-On
Optional Parallel or Serial Output Connections
11V Gate Drive Voltage
High Input-to-Output Isolation (up to 5kVRMS)
Long Life / High Reliability
RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …..….….……...………-40 to +85°C
Continuous Input Current ………..……………………..50mA
Transient Input Current ………..……….……………..400mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation ………..………………………40mW
Output Power Dissipation ……..……………………..400mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
SM8028
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
Ordering Information
Part Number Description
SM8028
SM8028-H
SM8028-S
SM8028-HS
SM8028-STR
SM8028-HSTR
8 pin DIP, (50/Tube)
5kVRMS Viso, 8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
5kVRMS, 8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
5kVRMS, 8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
Page 1 of 7
SM8028 /H/S/TR
Rev 2.00 (11/12/2013)
001729




 SM8028
Electrical Characteristics, TA = 25°C (unless otherwise specified)
SM8028
Optically Coupled
Dual MOSFET Driver
w/Discharge Circuit
Parameter
Input Specifications
LED Forward Voltage
LED Reverse Voltage
Reverse Leakage Current
Turn-On Current
Turn-Off Current
Output Specifications
Open Circuit Voltage
Short Circuit Voltage
Isolation Specifications
Isolation Voltage
(-H Option)
Input-Output Resistance
Symbol Min. Typ. Max. Units Test Conditions
VF
BVR
IInRleak
IF
IF(OFF)
- 2.8 3.5 V IF = 10mA
5 - - V IR = 10μA
- - 10 A VR = 5V
- 5 10 mA VOUT = 5V
- 0.5 - mA VOUT = 2V
VOC 11 12 - V IF = 10mA
ISC 15 20 - A IF = 10mA
3750
-
VISO
5000
-
-
- VRMS RH 50%, t=1min
RI-O
- 1012 -
 VI-O = 500VDC
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
Page 2 of 7
SM8028 /H/S/TR
Rev 2.00 (11/12/2013)
001729




 SM8028
SM8028 Solder Temperature Profile Recommendations
SM8028
Optically Coupled
Dual MOSFET Driver
w/Discharge Circuit
(1) Infrared Reflow:
Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow.
Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device
package should not exceed 250ºC:
G
F
D
E
H
B
A
C
Process
Step
A
B
C
D
E
F
G
H
Figure 1
Description
Preheat Start Temperature (ºC)
Preheat Finish Temperature (ºC)
Preheat Time (s)
Melting Temperature (ºC)
Time above Melting Temperature (s)
Peak Temperature, at Terminal (ºC)
Dwell Time at Peak Temperature (s)
Cool-down (ºC/s)
Parameter
150ºC
180ºC
90 - 120s
230ºC
30s
260ºC
10s
<6ºC/s
(2) Wave Solder:
Maximum Temperature:
Maximum Time:
Pre-heating:
Single Occurrence
(3) Hand Solder:
Maximum Temperature:
Maximum Time:
Single Occurrence
260ºC (at terminal)
10s
100 - 150ºC (30 - 90s)
350ºC (at tip of soldering iron)
3s
© 2013 Solid State Optronics San José, CA
www.ssousa.com +1.408.293.4600
Page 3 of 7
SM8028 /H/S/TR
Rev 2.00 (11/12/2013)
001729



Recommended third-party SM8028 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)