DatasheetsPDF.com

SMBJ33CA-HRA

Littelfuse
Part Number SMBJ33CA-HRA
Manufacturer Littelfuse
Description Transient Voltage Suppression Diodes
Published Mar 1, 2020
Detailed Description SMBJ-HRA Series Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ-HRA Series RoHS Pb e3 Uni-direction...
Datasheet PDF File SMBJ33CA-HRA PDF File

SMBJ33CA-HRA
SMBJ33CA-HRA

Overview
SMBJ-HRA Series Transient Voltage Suppression Diodes Surface Mount – 600W > SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation at (TFAi=g2.
25)º(NCobtye 10/1000µs Waveform 1), (Note 2) PPPM Power Dissipation on Infinite Heat Sink at TL=50OC Peak Forward Surge Current, 8.
3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only Operating Junction and Storage Temperature Range PM(AV) IFSM VF TJ, TSTG Value 600 5.
0 100 3.
5V -65 to 150 Unit W W A V °C Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient RuJL RuJA 20 °C/W 100 °C/W Notes: 1.
Non-repetitive current pulse , per Fig.
4 and derated above TA = 25OC per Fig.
3.
2.
Mounted on copper pad area of 0.
2x0.
2” (5.
0 x 5.
0mm) to each terminal.
3.
Measured on 8.
3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum.
Functional Diagram Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features • Excellent clamping capability • Low incremental surge resistance • Typical 11.
10V IR ≤ 1µA for VR > • SMT for minimal board footprint • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) • EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) • Built-in strain relief • Fast response time: typically less than 1.
0ps from 0V to BV min • 600W peak pulse power cap...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)