DatasheetsPDF.com

ENH064V1-450

WEDC
Part Number ENH064V1-450
Manufacturer WEDC
Description (ENH064V1-xxx) ENH064V1-300/450 Color TFT-LCD Module Features
Published Dec 7, 2006
Detailed Description www.DataSheet4U.com White Electronic Designs Display Systems Division GENERAL DESCRIPTION WEDC provides optically enhan...
Datasheet PDF File ENH064V1-450 PDF File

ENH064V1-450
ENH064V1-450

Overview
www.
DataSheet4U.
com White Electronic Designs Display Systems Division GENERAL DESCRIPTION WEDC provides optically enhanced solutions to the standard Sharp LQ64D343 color active matrix LCD module.
The first enhancement is an index matching (IM) film lamination to the front surface of the display polarizer.
The IM film is available in two surface treatments - IM/Clear and IM/110 (a 10% diffusion).
The second enhancement is the incorporation of an enhanced light guide (ELG) providing for up to 30% increase in brightness.
This module is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a backlight unit.
Graphics and text can be displayed on a 640 X 3 X 480 dot panel with 262, 144 color by supplying 18-bit data signal (6bit/color), four timing signals, +5V DC supply voltage for TFT-LCD panel driving and supply voltage for backlight.
ENH064V1-300/450 ENH064V1-300/450 Color TFT-LCD Module Features The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation type.
Therefore, this module is also suitable for multimedia use.
Viewing angle is 6 o'clock direction.
This module is the type of wide viewing angle and high brightness (350cd/m2).
Backlight-driving DC/AC inverter is not built in this module.
WEDC assumes no responsibility for any damage resulting from the use of the device which does not comply with the instructions and the precautions specified in these specification sheets.
WEDC does assume the responsibility for the warranty of the enhanced product.
MECHANICAL SPECIFICATIONS Parameter Display size Active area Pixel format Pixel pitch Pixel configuration Display mode Unit outline dimensions (1) Mass Surface treatment Note: 1.
Excluding backlight cables.
Specifications 16 (6.
4") Diagonal 130.
6 (H) x 97.
0 (V) 640 (H) x 480 (V) (1 pixel=R+G+B dots) 0.
204 (H) x 0.
202 (V) R,G,B vertical stripe Normally white 175.
0 (W) x 126.
5 (H) x 12.
0(D) 290 ± 20 IM/Clear (glossy) or IM/110 and hardcoat 3H Units cm mm pixel ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)