DatasheetsPDF.com

MX29LV160AB

Macronix International
Part Number MX29LV160AB
Manufacturer Macronix International
Description 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY
Published Aug 27, 2008
Detailed Description MX29LV160T/B & MX29LV160AT/AB 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY FEATURES • Extended single -...
Datasheet PDF File MX29LV160AB PDF File

MX29LV160AB
MX29LV160AB

Overview
MX29LV160T/B & MX29LV160AT/AB 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY FEATURES • Extended single - supply voltage range 2.
7V to 3.
6V • 2,097,152 x 8/1,048,576 x 16 switchable • Single power supply operation - 3.
0V only operation for read, erase and program operation • Fast access time: 70/90ns • Low power consumption www.
DataSheet4U.
com - 30mA maximum active current - 0.
2uA typical standby current • Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability.
- Automatically program and verify data at specified address • Erase Suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.
• Status Reply - Data polling & Toggle bit for detection of program and erase operation completion.
• Ready/Busy pin (RY/BY) - Provides a hardware method of detecting program or erase operation completion.
• Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors.
• CFI (Common Flash Interface) compliant (for MX29LV160AT/AB) - Flash device parameters stored on the device and provide the host system to access • 100,000 minimum erase/program cycles • Latch-up protected to 100mA from -1V to VCC+1V • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Low VCC write inhibit is equal to or less than 1.
4V • Package type: - 44-pin SOP - 48-pin TSOP - 48-ball CSP (8x13mm:for MX29LV160T/B; 6x8mm: for MX29LV160AT/AB) • Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash power supply levels during erase and programming, while maintaining maximum EPROM compatibility.
MX...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)