DatasheetsPDF.com

VND600-E

STMicroelectronics
Part Number VND600-E
Manufacturer STMicroelectronics
Description DOUBLE CHANNEL HIGH SIDE DRIVER
Published Apr 11, 2010
Detailed Description www.DataSheet4U.com VND600-E DOUBLE CHANNEL HIGH SIDE DRIVER Table 1. General Features Type VND600-E RDS(on) 35 mΩ Fig...
Datasheet PDF File VND600-E PDF File

VND600-E
VND600-E

Overview
www.
DataSheet4U.
com VND600-E DOUBLE CHANNEL HIGH SIDE DRIVER Table 1.
General Features Type VND600-E RDS(on) 35 mΩ Figure 1.
Package Ilim 25 A VCC 36 V s s s DC SHORT CIRCUIT CURRENT: 25 A CMOS COMPATIBLE INPUTS PROPORTIONAL LOAD CURRENT SENSE s UNDERVOLTAGE AND OVERVOLTAGE n SHUT-DOWN s OVERVOLTAGE CLAMP s THERMAL SHUT DOWN s CURRENT LIMITATION s VERY LOW STAND-BY POWER DISSIPATION s PROTECTION AGAINST: n LOSS OF GROUND AND LOSS OF VCC s REVERSE BATTERY PROTECTION (*) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE DESCRIPTION The VND600-E is a monolithic device made using STMicroelectronics VIPower M0-3 technology.
It is intended for driving resistive or inductive loads with one side connected to ground.
Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).
SO-16L This device has two channels in high side configuration; each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current.
Built-in thermal shut-down and outputs current limitation protect the chip from over temperature and short circuit.
Device turns off in case of ground pin disconnection.
Table 2.
Order Codes Package Tube VND600-E Tape and Reel VND600TR-E SO-16L Note: (*) See application schematic at page 9 Rev.
1 October 2004 1/18 www.
DataSheet4U.
com VND600-E Figure 2.
Block Diagram VCC OVERVOLTAGE VCC CLAMP UNDERVOLTAGE PwCLAMP 1 DRIVER 1 INPUT 1 LOGIC INPUT 2 GND DRIVER 2 ILIM1 Vdslim1 IOUT1 K Ot1 OUTPUT 1 CURRENT SENSE 1 OUTPUT 2 Ot2 PwCLAMP 2 Ot1 ILIM2 Vdslim2 IOUT2 OVERTEMP.
1 OVERTEMP.
2 Ot2 K CURRENT SENSE 2 Table 3.
Absolute Maximum Ratings Symbol VCC Parameter Value Unit DC supply voltage Reverse supply voltage DC reverse ground pin current Output current Reverse output current Input current Electrostatic Discharge (Human Body Model: R=1.
5KΩ; C=100pF) 41 -0.
3 -200 Internally limited -21 +/- 10 V V mA A A mA ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)