DatasheetsPDF.com

ABB0204

Abracon Corporation
Part Number ABB0204
Manufacturer Abracon Corporation
Description Low Skew Output Buffer
Published Feb 13, 2011
Detailed Description ABB0204 www.DataSheet4U.com Low Skew Output Buffer FEATURES • • • • • • • • • Frequency range 50 ~ 120MHz. Internal pha...
Datasheet PDF File ABB0204 PDF File

ABB0204
ABB0204


Overview
ABB0204 www.
DataSheet4U.
com Low Skew Output Buffer FEATURES • • • • • • • • • Frequency range 50 ~ 120MHz.
Internal phase locked loop will allow spread spectrum modulation on reference clock to pass to the outputs (up to 100kHz SST modulation).
Zero input - output delay.
Less than 700 ps device - device skew.
Less than 250 ps skew between outputs.
Less than 200 ps cycle - cycle jitter.
Output Enable function tri-state outputs.
3.
3V operation.
Available in 8-Pin 150mil SOIC.
PIN CONFIGURATION REF CLK2 CLK1 GND 1 8 CLKOUT CLK4 VDD CLK3 ABB0204 2 3 4 7 6 5 Remark If REF clock is stopped for more than 10us after it has already been provided to the chip, and after power-up, the output clocks will disappear.
In that instance, a full power-up reset is required in order to reactivate the output clocks.
DESCRIPTION The ABB0204 is a high performance, low skew, low jitter zero delay buffer designed to distribute high speed clocks and is available in 8-pin SOIC package.
It has four outputs that are synchronized with the input.
The synchronization is established via CLKOUT feed back to the input of the PLL.
Since the skew between the input and output is less than ± 350 ps, the device acts as a zero delay buffer.
BLOCK DIAGRAM REF PLL CLKOUT CLK1 CLK2 CLK3 CLK4 30332 Esperanza.
, Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: 949-546-8001 www.
Abracon.
com 03/21/05 Page 1 ABB0204 www.
DataSheet4U.
com Low Skew Output Buffer PIN DESCRIPTIONS Name REF 1 CLK2 2 CLK1 2 GND CLK3 2 VDD CLK4 2 CLKOUT 2 Number 1 2 3 4 5 6 7 8 Type I O O P O P O O Description Input reference frequency.
Spread spectrum modulation on this signal will be passed to the output (up to 100kHz SST modulation).
Buffered clock output.
Buffered clock output.
Ground.
Buffered clock output.
3.
3V Power Supply.
Buffered clock output.
Buffered clock output.
Internal feed back on this pin.
Notes: 1: Weak pull-down.
2: Weak pull-down on all outputs.
ELECTRICAL SPECIFICATIONS 1.
Absolute Maximum Ra...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)