DatasheetsPDF.com

L78L00

Niko-Sem
Part Number L78L00
Manufacturer Niko-Sem
Description Three-Terminal Positive-Voltage Regulator
Published Feb 10, 2014
Detailed Description NIKO-SEM Three-Terminal Positive-Voltage Regulator FEATURES L78L00 Series GENERAL DESCRIPTION This Series of fixed-vo...
Datasheet PDF File L78L00 PDF File

L78L00
L78L00

Overview
NIKO-SEM Three-Terminal Positive-Voltage Regulator FEATURES L78L00 Series GENERAL DESCRIPTION This Series of fixed-voltage monolithic integrated circuit voltage regulators is designed for a wide range of applications.
These applications include on-card regulation for elimination of noise and distribution problems associated with singlepoint regulation.
In addition, they can be used with power-pass elements to make high-current voltage regulators.
One of these regulators can deliver up to 100 mA of output current.
The internal limiting and thermal shutdown features of these regulators male them essentially immune to overload.
When used as a replacement for a zener diode-resistor combination, an effective improvement in output impedance can be obtain -ed together with lower-bias current.
z 3-terminal regulators z Output current up to 100 mA z No external component z Internal thermal overload protection z Internal short-circuit current limiting z Direct replacements for LM78L00, μA78L00 and AN78L00 series APPLICATIONS z Linear regulator z Instrumentation z Switching power supplies z PCs, Industrial equipment PIN CONFIGURATIONS DEVICE SELECTION GUIDE Device Package Marking L78L05N TO-92 78L05 L78L05C SOT-89 78L05 L78L12N TO-92 78L12 L78L12C SOT-89 78L12 1 MAY-31-2001 Free Datasheet http://www.
datasheet4u.
net/ NIKO-SEM Three-Terminal Positive-Voltage Regulator L78L00 Series ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage - V I Continuous total power dissipation Storage Temperature Range - TSTG Junction Temperature - TJ Lead Temperature (Soldering, 10 Seconds) - TL VALUE 30V (See Note 1) -65 to +150 °C 125 °C 260 °C Note1: To avoid exceeding the design maximum virtual junction temperature, three ratings should not be exceeded.
Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation.
DISSIPATION RATING TA...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)