DatasheetsPDF.com

LQS2G181MELZ35

Part Number	LQS2G181MELZ35
Manufacturer	Nichicon
Description	ALUMINUM ELECTROLYTIC CAPACITORS
Published	Jan 12, 2015
Detailed Description	ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge. series Suited for high fr...
Datasheet	LQS2G181MELZ35 PDF File

Overview

ALUMINUM ELECTROLYTIC CAPACITORS QS Snap-in Terminal type, 105°C High speed charge-discharge.
series Suited for high frequency regenerative voltage for AC servomotor, general inverter.
Suited for equipment used at valtage fluctuating area.
Suited for rectifier circuit of voltage doubler Compliant to the RoHS directive (2002/95/EC).
QS Hi speed chargedischarge GU Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance of chargedischarge behavior Endurance Shelf Life Marking Performance Characteristics – 25 to +105°C 350 to 450V 82 to 820µF ± 20% at 120Hz, 20°C 1 3 CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Rated voltage (V) tan δ (MAX.
) 350 0.
15 Measurement frequency : 120Hz, 400 0.
15 420 0.
15 Temperature : 20°C 450 0.
20 Rated voltage (V) Impedance ratio ZT/Z20(MAX.
) 350 to 450 Z – 25°C / Z+20°C 8 Measurement frequency : 120Hz After an application of charge-discharge voltage for 50million times (charge-discharge voltage difference(∆V) = rated voltage × 0.
35, cycle 6Hz) capacitors shell meet the characteristics requirement listed at right.
Capacitance change tan δ Leakage current Appearance Within ±20% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value There shell be found to remarkable abnormality on the capacitor The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 h...

Similar Datasheet

LQS2G181MELZ35 ALUMINUM ELECTROLYTIC CAPACITORS - Nichicon

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)