DatasheetsPDF.com

AP1115

Anachip
Part Number AP1115
Manufacturer Anachip
Description 0.6A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Published Aug 7, 2015
Detailed Description AP1115 0.6A Low Dropout Positive Adjustable or Fixed-Mode Regulator „ Features „ General Description • 1.3V maximum d...
Datasheet PDF File AP1115 PDF File

AP1115
AP1115

Overview
AP1115 0.
6A Low Dropout Positive Adjustable or Fixed-Mode Regulator „ Features „ General Description • 1.
3V maximum dropout at full load current • Fast transient response • Output current limiting • Built-in thermal shutdown • Packages: SOT89, TO92 • Good noise rejection • 3-Terminal Adjustable or Fixed 1.
5V / 1.
8V / 2.
5V / 2.
8V / 3.
0V / 3.
3V / 3.
5V / 5.
0V „ Applications • PC peripheral • Communication „ Connection Diagram (Top View) AP1115 is a low dropout positive adjustable or fixed-mode regulator with minimum of 0.
6A output current capability.
The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.
3V logic supply.
AP1115 is also well suited for other applications such as VGA cards.
AP1115 is guaranteed to have <1.
3V dropout at full load current making it ideal to provide well regulated outputs of 1.
25V to 5V with up to 18V input supply.
AP1115A-3 PIN SOT89 AP1115A-3 PIN TO92 3 Vin 2 1 Tab is Pin2 Adj (GND) Vout AP1115B-3 PIN SOT89 AP1115B-3 PIN TO92 3 Vout 2 GND 1 Vin 3 2 1 Tab is Pin2 Vout Vin Adj (GND) 3 Vout 2 Vin 1 GND „ Pin Descriptions NAME Adj (GND) Vout Vin I/O FUNCTION I A resistor divider from this pin to the Vout pin and ground sets the output voltage.
(Ground only for Fixed-Mode) O The output of the regulator.
A minimum of 10uF capacitor (0.
15Ω ≤ ESR ≤ 20Ω) must be connected from this pin to ground to insure stability.
The input pin of regulator.
Typically a large storage capacitor (0.
15Ω ≤ ESR ≤ 20Ω) is connected from this pin to ground to insure that the input voltage does not I sag below the minimum dropout voltage during the load transient response.
This pin must always be 1.
3V higher than Vout in order for the device to regulate properly.
This datasheet contains new product information.
Anachip Corp.
reserves the rights to modify the product specification without notice.
No liability is assumed as a result of the use of...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)