DatasheetsPDF.com

PL520-00

Micrel
Part Number PL520-00
Manufacturer Micrel
Description Low Phase Noise VCXO
Published Jan 1, 2016
Detailed Description PL520-00 Low Phase Noise VCXO with multipliers (for 100-200MHz Fund Xtal) FE AT UR E S  100MHz to 200MHz Fundamental M...
Datasheet PDF File PL520-00 PDF File

PL520-00
PL520-00

Overview
PL520-00 Low Phase Noise VCXO with multipliers (for 100-200MHz Fund Xtal) FE AT UR E S  100MHz to 200MHz Fundamental Mode Crystal.
 Output range: 100 – 200MHz (no multiplication), 200 – 400MHz (2x multiplier), 400 – 700MHz (4x multiplier), or 800MHz – 1GHz (LVDS output only for 8x multiplier).
 Available outputs: PECL, LVDS, or CMOS (High Drive (30mA) or Standard Drive (10mA) output).
 Selectable OE Logic (enable high or enable low).
 Integrated variable capacitors.
 Supports 3.
3V-Power Supply.
 Available in die form.
 Thickness 10 mil.
DESCRIPTION PL520-00 is a VCXO IC specifically designed to pull high frequency fundamental crystals.
Its design was optimized to tolerate higher limits of interelectrodes capacitance and bonding capacitance to improve yield.
It achieves very low current into the crystal resulting in better overall stability.
Its internal varicaps allow an on chip frequency pulling, controlled by the VCON input.
BLOCK DIAGRAM SEL VCON Oscillator Amplifier XIN w/ integrated varicaps XOUT PLL (Phase Locked Loop) PLL by-pass OE Q Q PL520-00 DIE SPECIFICATIONS Name Value Size 65 x 62 mil Reverse side GND Pad dimensions 80 m icron x 80 micron Th ic kn e s s 10 mil 62 mil DIE CONFIGURATION 65 mil OUTSEL0^ VDD VDD VDD VDD SEL0^ SEL1^ OUTSEL1^ 25 24 23 22 21 20 19 18 XIN 26 XOUT 27 Die ID: A1919-19A SEL3^ 28 SEL2^ 29 OE 30 CTRL VCON 31 C502A 12345 6 78 (1550,1475) 17 GNDBUF 16 CMOS 15 LVDSB 14 PECLB 13 VDDBUF 12 VDDBUF 11 PECL 10 LVDS 9 OE_SEL^ GND GND GND GND GND NC GND GNDBUF Y (0,0) X Note: ^ denotes internal pull up OUTPUT SELECTION AND ENABLE OUTSEL1 (Pad #18) 0 0 1 1 OUTSEL0 (Pad #25) 0 1 0 1 Selected Output High Drive CMOS Standard CMOS LVDS PECL (default) OE_SELECT (Pad #9) 0 1 (Default) OE_CTRL (Pad #30) 0 1 (Default) 0 (Default) 1 State Tr i- s t a te Output enabled Output enabled Tr i- s t a te Pad #9, 18, 25: Bond to GND to set to “0”.
No connection results to “default” setting through internal pu...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)