DatasheetsPDF.com

PL586-05

Micrel
Part Number PL586-05
Manufacturer Micrel
Description LVPECL VCXO
Published Jan 1, 2016
Detailed Description (Preliminary) PL586-05/-08 Low Phase Noise, LVPECL VCXO (for 130MHz to 200MHz Fundamental Crystals) FE AT UR E S  Adva...
Datasheet PDF File PL586-05 PDF File

PL586-05
PL586-05

Overview
(Preliminary) PL586-05/-08 Low Phase Noise, LVPECL VCXO (for 130MHz to 200MHz Fundamental Crystals) FE AT UR E S  Advanced non multiplier VCXO Design for High Performance Crystal Oscillators  Input/Output Range: 130MHz to 200MHz  Very Low Phase Noise: -149dBc @100kHz at 155.
52MHz  Very low Phase Jitter: <100fs RMS  High Pull Range: ±140ppm  Linearity: 5%  Integrated Variable Capacitors  Complementary LVPECL Outputs  Power Supply: 3.
3V ±10%  Available in Die or Wafer Form 0.
952mm VDD QB DIE CONFIGURATION 0.
952mm XIN 7 6 XOUT 8 Die ID 5 4Q 3 VSS DESCRIPTION The PL586-05/-08 is a non-multiplier VCXO IC specifically designed to pull fundamental mode crystals from 130MHz to 200MHz.
This IC achieves a typical pull range of ±140ppm with 5% linearity.
The phase noise performance, with <100fs phase jitter, makes this an ideal solution for all high end clocking applications such as SONET, WiMax, CPRI, OBSAI, Fiber Channel, and any application where performance and quality are required.
DIE SPECIFICATIONS Name Value Size Reverse side Pad dimensions Thickness 952 micron x 952 micron GND 80 micron x 80 micron 8 mil VCON (0,0) 1 2 OE OUTPUT ENABLE LOGIC PL586-05 OE State (Pad 4) Output Buffers State 0 1 (Default) Outputs Tri-Stated Outputs Enabled * Internal 60KΩ pull-up resistor OUTPUT ENABLE LOGIC PL586-08 OE State (Pad 4) Output Buffers State 0 (Default) 1 Outputs Enabled Outputs Tri-Stated * Internal 60KΩ pull-down resistor BLOCK DIAGRAM OE XIN XOUT VCON Xtal Osc Varicap Q QB Micrel Inc.
• 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 944 -0800 • fax +1(408) 474-1000 • www.
micrel.
com Rev 4/3/12 Page 1 (Preliminary) PL586-05/-08 Low Phase Noise, LVPECL VCXO (for 130MHz to 200MHz Fundamental Crystals) PAD ASSIGNMENT Pad # Name X (m)* 1 VCON -194 2 XOUT -372 3 XIN -372 4 VDD -117 5 QB 140 6 Q 315 7 VSS 373 8 OE 373 * Note: Referenced to center of the die.
Y (m)* -365 -190 158 329 315 75 -127 -373 Description Voltage ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)