DatasheetsPDF.com

8T49N028

Integrated Device Technology
Part Number 8T49N028
Manufacturer Integrated Device Technology
Description Multiple Frequency Clock Generator
Published Mar 8, 2016
Detailed Description FemtoClock® NG Crystal-to-3.3V, 2.5V Multiple Frequency Clock Generator w/Fanout Buffer 8T49N028 DATA SHEET General De...
Datasheet PDF File 8T49N028 PDF File

8T49N028
8T49N028

Overview
FemtoClock® NG Crystal-to-3.
3V, 2.
5V Multiple Frequency Clock Generator w/Fanout Buffer 8T49N028 DATA SHEET General Description The 8T49N028 is a low RMS phase jitter Clock Synthesizer with selectable internal crystal oscillator or external clock references and eight outputs, configurable as either LVDS, LVPECL or High Impedance.
After power up, two frequency select pins determine one of up to four different sets of factory preprogrammed crystal or input frequency and output frequency configurations.
From a single input reference, as many as three different output frequencies may be selected for the output banks: two of these frequencies can be generated by the internal crystal oscillator, and/or external clock pre-divider, and/or A output divider, and/or B output divider.
The third output frequency is from the B output divider.
Device pre-programming can be overwritten through the provided I2C interface.
Examples of valid frequency configuration setups illustrate this device's flexibility, and are shown in Table 3A.
The specific internal register settings for each of the four frequency sets are specified by an IDT order code.
Custom codes can be provided by contacting IDT.
Features • Fourth Generation FemtoClock NG PLL technology • Eight selectable LVPECL or LVDS outputs (bank selectable, two output channels per bank) • CLK, nCLK input pair can accept the following differential input levels: LVPECL, LVDS, HCSL • FemtoClock NG VCO Range: 1.
92GHz - 2.
5GHz • Bank A and B output frequencies are mux selectable from internal crystal oscillator, reference clock input, output divider A or output divider B • Clock from OUTPUT DIVIDER A, RMS phase jitter at 156.
25MHz (12KHz - 20MHz): 225fs (typical) • Clock from OUTPUT DIVIDER B, RMS phase jitter at 156.
25MHz (12KHz - 20MHz): 219fs (typical) • Clock from OUTPUT DIVIDER B, RMS phase jitter at 156.
25MHz (10kHz - 1MHz): 165fs (typical) Full 2.
5V or 3.
3V power supply • Full 2.
5V or 3.
3V power supply • I2C programming interfac...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)